Innokin Kroma Nova Podmod

After the success of the Kroma collection, Innokin gave it all with the Nova version of the beautiful podmod.

With a built-in battery of 3,000mAh, this electronic cigarette can deliver a maximum power of 60W. The Kroma Nova has a 3ml tank, made to hold the PZP Coils. Its OLED screen will give you access to all the necessary information for your vape and to the power setting mode.

Chic, handy, and intuitive, this podmod will be the perfect ally for vape beginners but will also please all vape experts looking for performing and transportable equipment.

Innokin's Kroma Nova podmod

Perfect finishes for optimal handling

Perfectly made in magnesium alloy, the Kroma Nova has a leather coat giving it an elegant design but also a faultless ergonomy.

Its 116.3x39.1x30.7 dimensions for a 142g weight make it easy to transport, which allows you to enjoy performances all day long, no matter where you are!

You'll find on the main side, from top to bottom, of the Kroma Nova:

• A trigger used as a Fire button, on which is encrusted the nice OLED screen
• 2 setting buttons
• 1 USB-C recharging port

Handling of Innokin's Kroma Nova podmod

A magnetic connection between the cartridge and the podmod

Ideal for vape beginners, the Kroma Nova has numerous advantages to serenely start vaping. Starting with its magnetic connection system between the podmod and the cartridge. You'll easily take your tank off the magnetic base by slightly pulling it by the top from the opposite side of the filling mark.

This connection system will allow you to easily alternate between the flavors of e-liquid, and this, all day long. Don't forget to buy a set of Kroma Nova cartridges now, so you never run out of spare tanks!

The magnetic connection of Innokin's Kroma Nova podmod

How to use the Kroma Nova podmod?

To turn your Kroma Nova on, you only have to push the Fire button three times, a button located on the long trigger that has the OLED screen. The main interface will display the following information:

• Lock/Unlock
• Level of battery
• Power in watts
• Value of the coil installed

To access the secondary screen, simultaneously push the fire button and the '+' button indicating the outgoing voltage and the number of puffs used.

Innokin lets you choose the power setting that you'll increase or lower through the '+' and '-' buttons, from 6 to 60W.

The OLED screen of Innokin's Kroma Nova podmod

No less than 3,000mAh of capacity

Innokin gave a 3,000mAh built-in battery to the Kroma Nova which offers you long hours of tasty vape. You'll be informed in real time of its level of capacity through the main interface of the OLED screen.

When it is time to fill your battery again, you only have to take an included USB-C cable in the box of Kroma Nova and connect it to its port. You'll find the latter below the screen.

The USB-C recharging port of Innokin's Kroma Nova

The Kroma Nova cartridge

Impeccably held on its magnetic base, the Kroma Nova cartridge features a 3ml tank. Designed to accommodate PZP Coil, it has a top-fill system, enabling you to charge your e-liquid without having to disconnect it from the podmod.

The Kroma Nova is included with two coils (1.0ohm and 0.4ohm), enabling you to alternate between a tighter draw for indirect inhaling (MTL), and a more airy vape for restrictive direct inhaling (RDL), or even direct inhaling (DL).

The Kroma Nova cartridge is fitted with a standard 510 drip tip and is included with a replacement mouthpiece for RDL (restrictive direct inhaling).

Tip: get one or more spare Krom Nova cartridges now, so you can easily alternate e-liquid flavors throughout the day.

The cartridge of Innokin's Kroma Nova cartridge

The PZP Coils

The Kroma Nova cartridge is specially designed to hold Innokin's PZP Coil. The manufacturer guarantees not only excellent longevity of use but also unrivaled performance in terms of flavors.

Innokin includes the Kroma Nova with two types of coils, depending on the type of draw desired:

• 1 1.0ohm PZP Coil (pre-installed): for a rather tight vape in indirect inhaling (MTL), to be used between 9 and 13W
• 1 0.4ohm PZP Coil: for an airy draw in restrictive direct inhale (RDL), or even in direct inhale (DL), use between 30 and 40W

After two or three weeks of use, the coil will begin to show signs of wear (slight burnt taste, loss of taste). It will then be time to change it for a new one.

To do this, unpack a new coil, then :

1. Remove the cartridge from its magnetic connector, pressing down to tip it over
2. Flip it upside down
3. Pull out the worn-out coil to remove it
4. Soak the new coil in a few drops of e-liquid
5. Insert it in the same place as the old one
6. Reconnect the cartridge to its magnetic base
7. Wait a few minutes for the new coil to properly prime with e-liquid

Tip: consider buying a set of PZP Coil now, to make sure you always benefit from your podmod's optimum performance.

Adjustable airflow

Innokin equips its podmod with a clever airflow adjustment switch, located on the opposite side of the main side, just below the cartridge.

Simply slide this switch to adjust the air intake under the coil, to slightly modify the draw sensations. The more you open the air intake, the more airy your vape will be.

The airflow button of Innokin's Kroma Nova podmod

A 3ml tank with a top filling

Specially created for the Kroma Nova podmod, the Kroma Nova cartridge presents a 3ml e-liquid capacity. This nice capacity will allow you to enjoy long hours of intense and tasty vape.

Once the tank is empty, you can easily and quickly recharge it in e-liquid thanks to a top-filling system. For this:

1. Slide the cap of the cartridge by pushing on the mark's side
2. Insert the tip of your bottle into the filling hole
3. Softly pour your e-liquid into the tank
4. Close the cap of the cartridge

Reminder: wait for 5 to 10 minutes before vaping it if you use a new coil so it is correctly primed in e-liquid.

The filling of the cartridge of Innokin's Kroma Nova podmod

Contents of the box

• 1 Kroma Nova podmod
• 1 3ml Kroma Nova cartridge (pre-build)
• 1 1.0ohm PZP Coil (pre-installed)
• 1 0.4ohm PZP Coil
• 1 spare 510 drip-tip (RDL)
• 1 recharging USB-C cable
• 1 user guide

The Kroma Nova podmod is made by Innokin.

Box contents of Innokin's Kroma Nova podmod