Aspire Flexus Q Podmod

Easy to handle and use, it's also durable thanks to its 700mAh built-in battery and very quick to recharge with its 3A USB-C port.

And wait until you see its small 2ml cartridge, with AF coils (two included), perfect for a tight draw!

The Flexus Q podmod by Aspire

The design of Flexus Q podmod

The Flexus Q podmod adopts the useful format (112.8mm high, 22.8mm wide, and 14.2mm deep with a small weight of 57 grams) to be easily transported.

Made with zinc alloy and PCTG, it's at once pleasant in the hand and resistant to daily use!

Handling Aspire's Flexus Q podmod

A podmod with a 700mAh built-in battery

The Flexus Q works like any podmod, it reveals a built-in battery body (here 700mAh autonomy) and safe electronic chipset, but also a magnetic base to its extremity, to fix its 2ml dedicated cartridge.

If you're just starting out, this is an electronic cigarette made for you! The settings are limited for simplicity, all the protections are there, and the recharge in USB-C is ultra-fast!

The magnetic base of Aspire's Flexus Q podmod

How does the Flexus Q podmod work?

To make vaping and life even easier, the Flexus Q podmod is as simple as can be. It does away with the traditional screen or small adjustment buttons. Instead, Aspire offers three preset wattages that can be adjusted via the power button, not to mention multiple safeguards to ensure your safety.

The LED indicator just below the fire button will let you know what intensity level you are in:

• Green: High mode (high power)
• Blue: Mid mode (average power)
• Red: Low mode (low power)

Of course, these modes are adjusted according to the sealed coil. With such an electronic operation, you can be sure not to exceed the power thresholds recommended by the manufacturer!

To start vaping, you have two options (manual or automatic): press the power switch while inhaling through the mouthpiece, or simply inhale through the mouthpiece!

The power switch and LED indicator of Aspire's Flexus Q podmod

Quickly charge your podmod, 10 minutes is enough 

With its Flexus Q podmod, Aspire innovates - and that's an understatement! In addition to its enduring 700mAh battery, this electronic cigarette is able to reach a charge capacity of 80% in just 10 minutes! This, thanks to its USB-C port ultra powerful, in 3A.

How to charge your Flexus Q podmod? Connect the cable supplied in your box to the back of the pod mod, then connect it to an external power source.

The USB-C port of Aspire's Flexus Q podmod

A 2ml PCTG cartridge

If the built-in battery of your Flexus Q takes care of the power supply, safety, and operation, it's the cartridge that clips onto its magnetic base that will hold the coil and the e-liquid of your choice.

This cartridge in PCTG is very solid. It suggests a 2ml sufficient capacity. In the end, you will find a mouthpiece (included in the set) in the shape of a beak, for a better retranscription of the flavors and tight sensations. Especially for MTL and beginners!

The 2ml cartridge of Aspire's Flexus Q podmod

Equip your cartridge with an AF coil!

To work, the cartridge of your Flexus Q podmod by Aspire will require the use of Aspire's AF coils.

Here, two are already provided:

• AF coil 1 ohm, to use from 12 to 15 watts
• AF coil 0.6 ohm, to use from 15 to 18 watts

Integrate an AF coil by simply unclipping the cartridge from the magnetic base of the Flexus Q podmod. Then, turn the cartridge over and place a new coil inside the tank in the slot provided. Don't forget to soak the coil before placing it; this will make it easier to prime and avoid dry hits.

N.B.: Generally, a coil should be changed about every two to three weeks, depending on your use.

The airflow of Flexus Q podmod

The Flexus Q podmod by Aspire has a well thought-out air intake system. The latter can be adjusted as you wish, just push the sliding button on the side of the device with your finger!

Thanks to it, you will easily move from tight sensations in indirect inhale (MTL) to more airy sensations in restrictive direct inhale (RDL).

The airflow control knob of Aspire's Flexus Q podmod

How to fill the cartridge?

In the Flexus Q cartridge, you can pour until 2ml e-liquid. How? Simply by going through the side of the cartridge!

Unclip it from the magnetic base of the podmod, lift the silicone tab on its side, then insert the tip of your bottle while tilting the cartridge slightly to avoid any leakage. Once the filling is complete, replace the tab, the cartridge on the base of the built-in battery, and resume your vaping session!

The filling of Aspire's Flexus Q podmod

Box contents of the Flexus Q podmod

• A Flexus Q built-in battery
• A Flexus Q cartridge - 2ml
• An AF coil 1Ω
• An AF coil 0.6Ω
• A USB-C spare cable
• A user guide

The Flexus Q podmod is made by Aspire.

Box contents of Aspire's Flexus Q podmod