Geek Vape Soul Podmod

Discover the Soul podmod by Geek Vape in a video: a mini format but with a great capacity of 1,500mAh!

Designed for beginners, this podmod from Geek Vape offers a choice of automatic power adjustment based on the coil value installed, or manual adjustment (from 5 to 30W). You can check this information at any time on the bright OLED screen on the front.

This pod is equipped with Soul disposable cartridges with a capacity of 4ml; and there's no need to think about changing the coil; all you have to do is disconnect the old cartridge, throw it in a dedicated waste bin, and change it for a new one.

Geek Vape's Soul podmod

The design of the Soul podmod

This rounded podmod ensures optimal handling thanks to its dimensions of 107.8 x 31.4 x 21.5 mm. Say goodbye to the PCTG cartridge visible at the top of your pod! Here, it is hidden by a cap, completing the look of this e-cigarette.

There are no multiple settings on this podmod, just a simple fire switch that allows you to turn your e-cig on and off, as well as vape, of course. In addition to this single switch, you will also enjoy a 0.69" OLED screen on the front.

Your electronic cigarette also has a USB-C port for charging the battery.

Handling Geek Vape's Soul podmod

A handy connection

To take the standards of the world of podmods, the Geek Vape brand gave an effective and reassuring magnetic connection to the Soul podmod.

To detach the cartridge from the podmod, you just have to take the cap off and slightly pull it.

The connection between the cartridge and the Soul podmod by Geek Vape

A podmod thought for beginners

The Geek Vape brand has designed its pod with simplicity in mind, offering an e-cig accessible to the greatest number. Depending on the coil installed in the cartridge, you can enjoy a power range from 5 to 30W, to discover a draw from tight (MTL) to slightly airy (RDL). Moreover, for users who want the simplest possible experience, power is automatically adjusted according to coil value.

However, if you wish to customize your vape experience, you can adjust the power in Watts.

For this:

1. Push the Fire button 3 times in 2 seconds to see the value blink
2. Set the power in increments of 1W by pushing the Fire button (Tip: keep pushing the Fire button to go faster)
3. Wait for 3 seconds to get out of the setting mode

The maximum power of 30W is supplied by a battery of 1,500mAh.

You don't necessarily have to push the Fire button to vape; this podmod has an automatic draw for extremely easy use.

The 0.69" OLED screen of Geek Vape's Soul podmod

1,500mAh rechargeable by USB-C

The Soul podmod of the Geek Vape brand is supplied with a battery of 1,500mAh, allowing you to enjoy your favorite e-liquid for a long time without worrying about recharging. Unfortunately, by the time you see only one battery life bar on this pod's OLED screen, it's time to top up the battery.

Once again, Geek Vape has kept things simple. All you have to do is plug in the supplied USB-C cable to refuel.

To extend the life of your battery, we strongly recommend connecting it to a modem router or computer port, for example.

The USB-C port of Geek Vape's Soul podmod

The Soul cartridge

The Soul podmod has a 4ml cartridge. To quickly check how much e-liquid is left, you can rely on the large window on the removable cap.

This disposable cartridge is equipped with a fixed coil; Geek Vape offers the podmod with two different coil values: 0.6ohm and 1.0ohm.

The cartridge of Geek Vape's Soul podmod

A sealed coil in the cartridge

Simplicity is the most apt adjective for this Soul podmod. There's no question of changing coils here. That's right, as the cartridges are equipped with a sealed coil, once the latter has worn out, i.e., reduced vapor production, a slight burnt taste, or loss of flavor, all you have to do is dispose of it in a dedicated waste bin.

The Geek Vape brand had the excellent idea of including a second cartridge in the podmod's box, equipped with a 1.0ohm coil, giving pride of place to a tight-draw vape (MTL) favoring flavors.

To find out how to replace your old coil, please follow the instructions below:

1. Remove the tank cap
2. Detach the cartridge from the podmod
3. Dispose of it in a dedicated waste bin
4. Clip on the new, pre-filled cartridge
5. Replace the cap
6. Wait about ten minutes for the coil to prime itself

An original airflow

Located on top of the cartridge, you can enjoy an easily adjustable airflow.

Indeed, you just have to turn the small wheel located on the side of the drip-tip, so you let more or less air come out. You'll go from a very tight to a slightly airy vape, and this, in no time.

The airflow of Geek Vape's Soul podmod

An easy cartridge to fill

As your vape sessions go by, you can see your e-liquid go down little by little. The Geek Vape brand has thought of beginners by offering a filling on the side of the cartridge.

You'll need to:

1. Take the top part off
2. Detach the silicon strip
3. Insert the tip of your bottle in the hole
4. Fill with e-liquid
5. Close the silicon strip
6. Replace the cap

If you just changed your cartridge and the coil, wait for a few minutes so that the latter is correctly primed.

Filling of the cartridge of Geek Vape's Soul podmod

Contents of the box

• 1 1,500mAh Soul podmod
• 1 0.6ohm Soul cartridge (pre-installed)
• 1 1.0ohm Soul cartridge
• 1 USB-C cable
• 1 user guide

Contents of the box of Geek Vape's Soul podmod

The Soul podmod is made by the Geek Vape.