Geekvape Digi Pro Podmod

Geek Vape presents its Digi Pro R podmod, an electronic cigarette going from a semi-airy draw to a restrictive vape.

With not only a 2,000mAh capacity, your podmod also has a maximum power of 40W and a 5ml tank.

Your Digi Pro R is specially designed to accommodate JR cartridges, which are themselves designed to accommodate J Series coils.

With a 0.96” TFT touchscreen, you can easily access the different operating modes, including manual power adjustment.

All in all, you get effective and functional equipment for all vapers.

Geekvape's Digi Pro R podmod

A multifunction touchscreen

The main feature of the Digi Pro R podmod is undoubtedly its 0.96” TFT color touchscreen: in addition to its stylish design with LED strips that light up when inhaling, it is also very functional.

Created by Geek Vape in a zinc alloy structure, your e-cig is characterized by good resistance to wear and corrosion.

Designed in dimensions of 39.39 x 32 x 23.80 mm and weighing 97g, its ergonomic format also slips easily into your pocket.

Handling of Geek Vape's Digi Pro R podmod

A magnetic connection

In addition to its intuitive operation, your Digi Pro R podmod features a handy magnetic connector system.

This allows you to quickly and easily turn the tank around and switch between different e-liquid flavors.

The magnetic base of Geek Vape's Digi Pro R podmod

How does your Digi Pro R work?

The Geek Vape brand offers several functioning modes, designed to answer the diverse needs of a vaper.

To turn on or off your podmod, push the FIRE button five times.

Click 3 times on the same button and access the following modes:

• BOOST mode: automatic adjustment of the maximum power handled by the coil
• SMART mode: automatic setting of the power, with the possibility to manually adjust the range offered by the coil
• ECO mode: automatic adjustment of the minimum power handled by the coil

Always in 3 clicks, set your equipment through the menu with the options below:

• PUFF: reset of puff counter
• SCREEN: light adjustment
• LIGHT: choose the LED theme
• ABOUT: total reset of saved settings

Once your settings are adjusted through the touchscreen, lock your e-cigarette thanks to the 'A-Lock' button located below, avoiding any involuntary manipulations.

The touchscreen of Geek Vape's Digi Pro R podmod

A capacity of 2,000mAh

The electronic cigarette thought by Geek Vape has a built-in battery of 2,000mAh.

It can be charged using the USB-C cable included in the box, via the dedicated charging port located next to the switch, below the podmod.

The brand guarantees a full charge for your pod in just 30 minutes.

The USB-C port and the sliding locking button of Geek Vape's Digi Pro R podmod

The JR cartridge

Your podmod is delivered with two JR cartridges, each with a 5ml tank.

The JR cartridge is specially made to hold the J Series coils of the manufacturer, with two coils delivered with the podmod.

The JR cartridge of Geek Vape's Digi Pro R podmod

The J Series coils

In its box, Geek Vape includes two J Series coils:

• 1 0.4ohm J Series coil: recommended for a vape in restrictive direct inhaling (RDL), between 23W and 28W
• 1 0.6ohm J Series coil: recommended for a draw in indirect inhaling (MTL), between 16W and 21W

Please note that the Digi Pro R podmod is also compatible with the entire collection of JR cartridges.

After two to three weeks of use, the coil will start to show some signs of wear, such as a loss of flavors or a light burnt taste.

You only have to replace it with a new one.

Top Airflow

Geekvape gives its Digi Pro R an airflow button, meant for the adjustment of air intakes.

This button, located on the side of the podmod, enables you to easily and quickly alternate between an airy draw and a more restrictive vape.

Airflow button on the JR cartridge of Geek Vape's Digi Pro R podmod

The top filling of your cartridge

The brand Geek Vape bets on a handy top filling of your 5ml tank.

Here are some indications to proceed to the recharge of e-liquid in your cartridge:

1. Open the silicon strip placed on the lateral part of the tank
2. Insert the thin tip of your bottle
3. Pour your e-liquid
4. Carefully close the strip
5. Wait for some minutes before vaping if you use a new cartridge, this is to ensure that the e-liquid properly saturates the coil.

The filling of the JR cartridge of Geek Vape's Digi Pro R podmod

Box contents

• 1 40W Digi Pro R podmod
• 1 5ml JR cartridge
• 1 0.4ohm J Series coil
• 1 0.6ohm J Series coil
• 1 USB-C cable
• 1 user guide

The Digi Pro R podmod is made by Geek Vape.

Box contents of Geek Vape's Digi Pro R podmod