Smoktech Nord GT Podmod

Opt for a airy and tasty vape with Smoktech’s Nord GT Podmod! Discover it in detail in this unboxing video!

With its Nord GT podmod, Smoktech is banking on an airy vape thanks to 80W of power in a mini format with a timeless look.

To keep you going for hours on end, you'll enjoy a built-in battery with a capacity of no less than 2,500mAh. You'll also find a transparent cartridge with a capacity of 5ml.

This tank is supported by RPM3 coils, ensuring optimal flavor rendering and a long service life.

Smoktech's Nord GT podmod

The design of Nord GT

The Nord GT podmod stands out with its rounded lines and dimensions of 105.6 x 25 x 33.5 mm.

The front and back feature a leather or carbon effect, providing an effective grip for even the clumsiest vapers.

You'll also make the most of the large Fire switch on the front, allowing you to control your pod from start to finish. Thanks to the 0.69" OLED screen, you can check various information such as the battery level and power. The latter can be adjusted according to the coil value installed using the small switch beneath the screen.

On the back, you will find a sliding switch that allows you to adjust the airflow hole located above the screen. Finally, to complete the design of this pod, you can make the most of a USB-C port.

Handling Smoktech's Nord GT podmod

A simple connector

Are you looking for a simple and effective connector? Smoktech has designed a handy connector for vapers who want to easily attach their cartridge to their podmod. Thanks to a magnetic connector, you simply pull gently on the cartridge to detach it from the rest of the device.

This makes it easy to refill using the silicone membrane, or to change the coil when you notice a slight burnt taste or loss of flavor.

The magnetic connector of Smoktech's Nord GT podmod

How does the Nord GT podmod work?

The brand Smoktech offers you an easy-to-use podmod. Adjust the power from 5 to 80W depending on the installed coil and enjoy a direct (DL) or restricted direct (RDL) inhale.

To adjust the power, follow these few steps:

1. Switch on the podmod by pressing the Fire button 5 times in a row
2. Press the button below the screen 3 times in a row until the power blinks
3. Press the button a single time to increase the power watt per watt (hold it to increase the power faster)
4. Wait for 5 seconds and wait until the power doesn't blink anymore

To provide you with up to 80W of power, your podmod is fitted with a 2,500mAh built-in battery that allows you to vape for hours on end without needing to charge it!

The screen of Smoktech's Nord GT podmod

A 2,500mAh battery with a handy USB-C port

Even though this podmod offers a massive capacity, you will need to charge it at one point. To do so, the brand Smoktech opted for a USB-C port right below the podmod. Use the USB-C cable provided to connect the podmod to an external power source.

Once the screen is on, you'll be able to check the battery level in real-time.

To preserve the lifespan of your battery, we recommend you charge it via a laptop.

The USB-C port of Smoktech's Nord GT podmod

A 5ml cartridge

The Nord GT cartridge has a capacity of no less than 5ml!

The magnetic connector allows you to quickly change flavors or travel with peace of mind, whatever the conditions.

Finally, its compatibility with RPM3 coils with a value between 0.15 and 2.5 ohms allows you to change your vape experience according to your needs.

The cartridge from Smoktech's Nord GT podmod

The RPM3 coils

Two RPM3 coils are included in the box of your podmod:

Whenever you start feeling a slight burnt taste or a loss of flavor, it means it's time to replace your coil.

To do so, proceed as follows:

1. Remove the cartridge from the podmod
2. Pull the worn-out coil to remove it
3. Take a new coil and soak it with a few drops of e-liquid
4. Insert the new coil into the dedicated slot
5. Clip the cartridge back onto the podmod
6. Wait for about 10 minutes before vaping to make sure the coil is primed
7. Vape!

The airflow of Nord GT podmod

Smoktech allows you to change your vape experience throughout the day thanks to adjustable airflow.

To switch from high vapor production to slightly more pronounced flavors, simply slide the switch on the back. You will then see the airflow hole above the screen close or open.

The airflow system of Smoktech's Nord GT podmod

How to refill your cartridge?

Refilling your cartridge will be child's play thanks to Smoktech's clever side-fill system!

Indeed, simply proceed as follows:

1. Remove the cartridge from the podmod
2. Lift the silicone cover
3. Insert the tip of your e-liquid bottle into the dedicated hole
4. Fill the tank
5. Close the silicone cover
6. Clip the cartridge back onto the cartridge
7. Vape!

Wait for a few minutes before vaping if you use a new coil to make sure it is primed.

The side-fill system of the cartridge from Smoktech's Nord GT podmod

Contents of the box

• One Nord GT 2,500mAh podmod
• One Nord GT 5ml cartridge
• One 0.15ohm RPM3 coil (pre-installed)
• One 0.23ohm
• One USB-C cable
• One user guide

The Nord GT podmod is manufactured by Smoktech.

Contents of the box of Smoktech's Nord GT podmod