Vaporesso Luxe QS Podmod

Vaporesso’s Luxe QS podmod knows how to make you happy.

Its colorful and sparkling aesthetic, along with its handy size and lightness, will win you over right away.

It’s comprised of a 1000mAh built-in battery, a USB-C port, automatic settings, and 2ml disposable cartridges!

It’s a great kit for beginners, especially if they are looking for a very tasty and tight MTL draw!

Vaporesso’s Luxe QS pod mod

A small and practical pod mod with a shiny look

The Luxe QS podmod is only 91.6mm high, 26mm wide, and 16.5mm thick. It’s therefore incredibly light.

This electronic cigarette has two different decorative panels:

• Its front panel is adorned with stripy colors and a shiny finish
• Its rear panel is made of raw metal, with a wavy effect and the manufacturer's logo.

Handling Vaporesso’s Luxe QS pod mod

A pod mod for the beginner vaper

Vaporesso’s Luxe QS pod mod is just the right device for beginner vapers or for those looking for an extra kit for their indirect inhale sessions (MTL)!

In addition to its ergonomic size, the Luxe QS podmod is powered by a built-in 1000mAh battery, which is easily and quickly charged via the device’s USB-C port.

But most importantly, the vape is fully automatic!

And if that wasn’t enough, it has a magnetized connector and uses disposable cartridges, which are already fitted with a coil.

The magnetized connector of Vaporesso’s Luxe QS pod mod

Inhale and that’s it!

If you’re used to pressing the power switch to vape, forget this habit! Vaporesso’s Luxe QS podmod automatically switches on when you inhale on its mouthpiece.

And that's not all! The Luxe QS podmod also automatically adjusts the power depending on which cartridge is installed.

You won’t have to worry about anything when using Vaporesso’s Luxe QS podmod!

A USB-C port for charging its battery!

Although it has a certain autonomy thanks to its built-in 1000mAh battery, this e-cigarette will inevitably need to be charged from time to time.

To do so, connect the cable included in the kit to the USB-C port underneath the e-cigarette.

The USB-C port of Vaporesso’s Luxe QS pod mod

The two disposable cartridges of the Luxe QS pod mod

Vaporesso’s pod mod uses a disposable cartridge system, where the coils are sealed and cannot be replaced.

There are two 2ml Luxe QS cartridges included in the kit:

• One 2ml Luxe QS cartridge with a 0.6 ohm coil (pre-installed)
• One 2ml Luxe QS cartridge with a 1 ohm coil

Moreover, this electronic cigarette is compatible with the Luxe Q disposable cartridges!

The disposable cartridge of Vaporesso’s Luxe QS pod mod

Instead of changing the coil, change the cartridge!

The disposable cartridges have a coil already in them. This means that you don't have to replace the coil once it has worn out. Every two to three weeks on average, you’ll just have to replace the entire cartridge!

Change the airflow in a flash!

Vaporesso has come up with a great way of adjusting the e-cig’s airflow, simply rotate the cartridge in one way or the other!

This will allow you to choose between a fairly tight draw (restrictive MTL) and an airier one (loose MTL).

The air intakes of Vaporesso’s Luxe QS pod mod

Remove the drip tip and fill the 2ml tank!

Each compatible cartridge has the same characteristics:

1. It’s made from solid PCTG material
2. It can hold 2ml of e-liquid
3. It’s easily filled from above

To fill the disposable cartridge, unclip the mouthpiece and insert the tip of your bottle of e-liquid into the red silicone hole.

Never pour any e-liquid into the middle hole. Never fill to the brim. Always wait 5 to 10 minutes after filling the tank.

Filling Vaporesso’s Luxe QS pod mod

Contents

• The 1000mAh Luxe QS battery
• One pre-installed Luxe QS cartridge with a 0.6Ω coil
• One Luxe QS cartridge with a 1Ω coil
• A USB-C cable
• A user guide

The Luxe QS podmod is manufactured by Vaporesso.

The contents of Vaporesso’s Luxe QS pod mod kit