SXmini PureMax Podmod

Are you looking for a podmod to get started, but one that's powerful enough to satisfy you? Here's the PureMax from SXmini.

This e-cigarette delivers up to 25W of power thanks to its Yihi chipset and has a built-in 1050mAh battery. Moreover, the USB-C port under the podmod makes it quick and easy to charge.

Thanks to its 4ml PX disposable cartridges, you can make the most of your e-liquid capacity. These cartridges have sealed coils, so once they are empty or worn out, you can dispose of them directly in a dedicated waste container. In addition, you will find the PX25 cartridge in the box with this podmod, offering you a restrictive semi-airy direct draw (RDL).

SXmini's PureMax podmod

A design in all simplicity

The SXmini brand offers an oval podmod allowing perfect handling, even for the clumsiest vapers. Its dimensions of 94 x 26 x 19mm will please big and small hands. Its lightweight of 55g will be the perfect ally for all bags or pockets.

Its zinc alloy cover will enhance the unique button on this electronic cigarette. This button will turn on and off the e-cigarette so you can vape and set the power.

To complete the front side, you'll find a sliding airflow trapdoor with 4 LEDs indicating the charge or power delivered.

Handling of SXmini's PureMax podmod

A magnetic connection

Are you looking for a simple solution for the change of the cartridge? The PureMax podmod is connected, thanks to an efficient and handy magnetic system, with the cartridges of the PX collection, directly inside the podmod. Say goodbye to the cartridge falls or disconnections!

This ingenious system will allow you to change flavors in an instant, to enjoy all your e-liquid collection.

Magnetic connection between SXmini's PureMax podmod and PX cartridge

How does the PureMax podmod function?

SXmini spoils the vape beginners with a podmod easy to use.

Forget the electronic cigarettes with several settings, here you'll only find the bare minimum for an agreeable vape experience.

Thanks to 4 LEDs on the side, you can easily change power by lengthily pushing the fire button:

With the SX303J chipset by Yihi, the PureMax podmod has automatic control of the temperature, through the Pure mode, allowing you to avoid all dry hits when the cartridge is empty, handy, isn't it?

Its 1050mAh battery will allow you to enjoy long vape sessions, without worrying about recharging. Even if it happened, don't panic, with a USB-C port under the podmod and thanks to an included cable, getting some battery will only take an instant.

Fire button on SXmini's PureMax podmod

A built-in battery of 1,050mAh

This podmod has a built-in battery with a capacity of 1,050mAh.

To check on the remaining level of battery, SXmini has included a handy system of LED on the PureMax podmod:

• 4 LED: 100 to 75% of autonomy
• 3 LED: 74 to 50% of autonomy
• 2 LED: 49 to 25% of autonomy
• 1 LED: 24 to 1% of autonomy

If you only see one LED on, don't worry. Take the USB cable included and connect it under the podmod where there is a discreet USB-C port, fill it, and enjoy long vape sessions!

Charging port of SXmini's PureMax podmod

The PX cartridge

With 4ml of capacity, the PX cartridge included with this kit offers the possibility to enjoy your favorite e-liquid for a long time.

Once the tank is empty, you can refill it thanks to a simple refilling system with a silicone membrane.

However, one day the coil of the cartridge will give a light burnt taste or a loss of flavors. The coil is sealed; you only need to take the disposable cartridge out, thanks to the clever magnetic connection system, and then throw it out in the correct waste bin.

Then simply change the entire cartridge for a new one!

The cartridge of SXmini's PureMax podmod

An airflow easy to adjust

You'll find on this podmod a simple and handy airflow system. Here, you don't have to set up anything, only a sliding trapdoor allowing you a precise and reliable airflow adjustment.

The more the trapdoor is low, the more the airflow is important, offering a higher production of vapor.

Airflow of SXmini's PureMax podmod

The filling of the PX cartridge

No eccentricity with the PX cartridge. You'll find a simple system of a silicon membrane to lift so you can slide the thin tip of your favorite e-liquid.

To help the beginners, here are the steps to respect the filling of a PX cartridge:

1. Take the cartridge out of the podmod
2. Slightly lift the silicon cap in the tank
3. Insert the thin tip of your e-liquid and fill to three-quarters
4. Close the silicon cap
5. Connect the cartridge with the podmod

When you install a new cartridge, it is recommended to wait at least 10 minutes to let the coil prime.

Filling of PX cartridge on SXmini's PureMax podmod

Contents of the box

• 1 PureMax podmod
• 1 0.6ohm PX cartridge
• 1 510 drip-tip
• 1 USB-C cable
• 1 user guide

The PureMax podmod is made by the SXmini brand.

Contents of the box of SXmini's PureMax podmod