Innokin Sceptre 1,400mAh Podmod

Innokin presents a high-performance podmod in a rectangular format!

Discover the Sceptre pod, with a maximum power of 20 watts, a built-in 1400mAh battery and a 3ml cartridge. It comes with two 0.65ohm coils and is designed for a tight draw with indirect inhaling (MTL).

Easy to use, it is particularly suitable for beginners, but its practicality and efficiency will also impress more experienced vapers.

The design of the Sceptre podmod

Small and ergonomic, Innokin has worked hard on the design of this electronic cigarette to make it handy.

Perfect for beginners, the coil heats up automatically when you inhale. For added comfort, there is also a switch on the front of your Sceptre podmod.

Equipped with an ingenious chipset, your Pod Sceptre by Innokin will give you a customized vaping experience with two distinct modes. You will find Normal Mode and Boost Mode, which will vary the power output depending on the coil selected.

The 1,400mAh Sceptre Podmod by Innokin

A 1,400mAh built-in battery

With its built-in battery of 1,400mAh, the Sceptre Podmod ensures a long use, and this, without losing power! To charge your new purchase, Innokin provides a USB-C cable.

For more comfort, Innokin has its podmod with a "passthrough" function that will enable you to vape even when recharging!

To control your level of battery, nothing is simple, thanks to its LED system created by Innokin. The latter will enlighten the level of e-liquid. But their function, the third LED, will indicate your battery level!

• If the LED is green, it indicates that the battery level is between 50 and 100%
• If the LED is blue, your battery level is between 10 and 50%
• If the LED is red, you should recharge it; your battery level will be between 0 and 10%

The USB-C port of the 1,400mAh Sceptre Podmod by Innokin

The Sceptre Pod cartridge of 3ml of capacity

Convenient, ingenious, and easy to use, the Sceptre cartridge easily inserts into the body of your podmod, thanks to its magnetic system.

Delivered with your Spectre Podmod, you'll find two coils of 0.5ohm and 1.2ohm, both conceived to bring you different vape sensations.

Your Spectre Podmod cartridge is really manageable and easy to clean. Its filling is also simple, you just need to lift the strip in silicon, on the side of the cartridge, to have access to the tank. 

The cartridge of Innokin's 1,400mAh Sceptre Podmod

Two coil types

Two coils are supplied with your 1,400mAh Sceptre Podmod.

This value allows you to vape between 10 and 12.5 watts, for a restrictive vape with indirect inhaling (MTL).

To replace your used coil, you need to unscrew the base of your podmod, then install your new coil.

The coils of Innokin's 1,400mAh Sceptre Podmod

An adjustable airflow

Don't look for airflow on the podmod, it is actually in the cartridge, just under the coil.

Thanks to a pivoting ring, you can go from an indirect inhalation in MTL to a restrictive vape in DL.

According to the chosen coil and the vape sensations wanted, you can adjust your airflow for a custom-made vape!

The air intakes of Innokin's 1,400mAh Sceptre Podmod

3ml of capacity and a secured filling on the side!

Thanks to a Sceptre cartridge of 3ml of capacity, you'll taste flavors of your favorite e-liquids, without worrying about the level of e-liquid left!

The filling of the 1,400mAh Sceptre Podmod will be particularly simple and fast. You can simply remove the cartridge of your small electronic cigarette, take the silicon strip off that is on the side, and insert the cap of your e-liquid!

Once it is filled, simply close the silicon trapdoor, replace the cartridge in the Sceptre Podmod, and vape!

The filling of Innokin's Sceptre cartridge

Box contents

• A 1,400mAh Sceptre Podmod
• A Sceptre Pod cartridge of 3ml
• Two MTL 0.65ohm Sceptre coils (one pre-installed)
• A USB-C cable
• A user manual
• A warranty card

The 1,400mAh Sceptre Podmod is made by Innokin.

Box contents of Innokin's 1,400mAh Sceptre Podmod