Lost Vape Ursa Nano Pro 2 Podmod

The Ursa Nano Pro podmod comes back with improved performances in a 2.0 version. Discover it through this explanatory video!

The great manufacturer Lost Vape comes back with the next version of its electronic cigarette in a podmod format. Offering no less than 30w of power, you can enjoy a light airy draw in a restrictive indirect inhaling (RDL) to reduce even more clouds. You can trust a 1000mAh battery ensuring you long vape sessions without having to worry. This Ursa Nano Pro 2 podmod is offered with a Quest 2.0 chipset promising you a serene vape with protection against short circuits.

Making its podmod compatible with both older-generation Ursa and V2 cartridges, you'll make the most of a wide range of options enabling you to change your vape experience in the blink of an eye. As the connector is always magnetic, you'll be able to switch from one cartridge to the next without even realizing it. So you can make the most of your fruity, tasty, or mentholated e-liquids all day long, depending on your mood. Finally, the good news is that inside the box you'll find no less than two cartridges with sealed coils (0.6ohm and 0.8ohm) ensuring easy and handy discovery.

Lost Vape's Ursa Nano Pro 2 podmod

A look that will knock you over with a feather

Each time you take this podmod out of your pocket or bag, your first reaction will be: 'Wow'! Indeed, the brand Lost Vape chose a design subtlety mixing roundness and straight lines to satisfy even the most demanding vapers. Thanks to its 113x24x14.8mm dimensions, you'll take this electronic cigarette where you want it. In the box, you'll find a nice lanyard with a connection ring so you no longer have to look for it.

Its zinc alloy cover is enhanced by a nice 0.42" OLED screen will allow you to check information like the level of the battery or the power selected. Of course, you'll find a traditional Fire button with an LED signal indicating when the charge is over, an airflow lateral sliding button, and a USB-C port on top.

Handling of Lost Vape's Ursa Nano Pro 2 podmod

A magnetic connection

So you don't change your vape habits, the brand Lost Vape presents you with an effective magnetic connection allowing you to change cartridges in no time. This Ursa Nano Pro 2 podmod is compatible with all the Ursa cartridges offering you the possibility to create a nice stock or keep your old cartridges if you're already a user of Ursa equipment.

Inside the box, you'll find two Ursa V2 cartridges with sealed coils. The first offers you a coil value of 0.6ohm and the second, a value of 0.8ohm. Your start in the vape world will be quick and simple.

The connection between the cartridge and Lost Vape's Ursa Nano Pro 2 podmod

How does the Ursa Nano 2 podmod work?

Meant for both beginner and more experienced users, Lost Vape has opted for simplicity to win everyone over. Its power, ranging from 5 to 30W, can be adjusted by 3 quick presses of the single switch. All you have to do then is press briefly to increment the power by 0.5W. Tip: a long press speeds up the process. Once you've chosen the right wattage, you can lock your setting with 4 quick presses, and you'll see a small padlock appear on the screen, allowing you to vape without worrying about changing the wattage.

You can choose between pressing the Fire switch or inhaling directly, to make the most of all the tastes in your favorite e-liquid. Here is the ideal ally for a simple and effective vape experience.

The 0.42" OLED screen of Lost Vape's Ursa Nano Pro 2 podmod

An enhanced battery of 1000mAh

Where there's more power, there's more battery. Well, good news, that's exactly what the engineers at Lost Vape have done. In fact, while increasing power to 30W, they haven't neglected capacity, increasing it to 1000mAh.

The battery level will be checked directly on the display, thanks to a small battery. When only one or two bars remain, it's time to charge your electronic cigarette. To do this, you'll find a USB-C cable in the box, which connects to the underside of your podmod, and then to an external power source. As a reminder, we recommend using a computer port or Internet mod to recover a few percent (%).

An original charge indicator! There's no need to look at the screen, just the Fire switch and its little LED circle. When it's flashing, the battery is being charged; when it's steady, the battery is full - a simple system, don't you think?

The USB-C recharging port of Lost Vape's Ursa Nano Pro 2 podmod

A revisited version of Ursa cartridges

The Lost Vape manufacturer enjoys the V2 of its Ursa Nano Pro podmod to make it compatible with the improved generation of its famous cartridges. Offering increased longevity and improved taste rendering, according to the brand, these cartridges will become your daily must-have. In fact, their 2.5ml capacity will provide you with long, tasty vape sessions.

Their design around a sealed coil means you can simply dispose of it in a dedicated waste bin before changing it, should you experience a slight burnt taste or loss of flavor, for example.

The Ursa V2 cartridge of Lost Vape's Ursa Nano Pro 2 podmod

A multitude of vape experiences available

Delivered with two Ursa V2 cartridges, this nice compact podmod will offer you two experiences of distinct vape that allow you to find the one that suits you. To choose it, don't hesitate to follow the guide below:

You'll also enjoy the compatibility with all the Ursa cartridges (empty and with sealed coils) to discover even more vape experiences.

A discrete airflow

Setting the air intake in your cartridge will become a real child's play. You'll only have a small lateral sliding button. As a reminder, the more holes are out, the more the air intake will be important offering you superior vapor production.

The airflow of Lost Vape's Ursa Nano Pro 2 podmod

How to fill the Ursa V2 cartridge?

As the long vape sessions go by, the moment to refill the 2.5ml tank will come. For this, the brand Lost Vape bet on a simple system that only requires a bottle of e-liquid and, then:

1. Detach the podmod cartridge
2. Take the silicon strip off
3. Insert the thin tip of your bottle
4. Pour up to three-quarters
5. Replace the strip
6. Clip the podmod cartridge

N.B: In case you use a new one, wait between 3 and 5 minutes so the coil is correctly primed.

The filling of the cartridge of Lost Vape's Ursa Nano Pro 2 podmod

Contents of the box

• 1 1000mAh Ursa Nano Pro 2 podmod
• 1 0.6ohm Ursa V2 cartridge (pre-installed)
• 1 0.8ohm Ursa V2 cartridge
• 1 USB-C cable
• 1 lanyard and a connection ring
• 1 user guide

The Ursa Nano Pro 2 podmod is made by Lost Vape.

The contents of the box of Lost Vape's Ursa Nano Pro 2 podmod