Voopoo Doric Galaxy S1 Podmod

Welcome to the vape world with Voopoo's Doric Galaxy S1!

This electronic cigarette has everything you need to start vaping easily: an 800mAh built-in battery, a 2ml cartridge with a 0.7ohm sealed coil, and an automatic draw system.

Voopoo's Doric Galaxy S1 podmod

A delicate design

Not bigger than a pen, the Doric Galaxy S1 only weighs 31g with a height of 125.8mm and a diameter of 16mm.

Its tubular shape made in aluminum alloy makes it a compact podmod with optimal handling.

Handling of Voopoo's Doric Galaxy S1 podmod

Only two elements to assemble

The Doric Galaxy S1 only presents two parts magnetically assembled: a mod with an 800mAh built-in battery and a cartridge with a sealed coil.

This system of magnetic connection allows you to easily replace your used cartridge and alternate the e-liquid flavors during the day!

The magnetic connection between the cartridge and Voopoo's Doric Galaxy S1 podmod

An entirely automatic functioning

You don't know how to use your Doric Galaxy S1? It is very easy!

You simply need to draw from the mouthpiece of the cartridge to deliver a puff thanks to an automatic activation system.

Your electronic cigarette has an LED light allowing you to have access to the level of battery capacity:

• White light: Battery between 20 and 100%
• Red light: battery between 0 and 20%
• Blinking red light: the battery has to be recharged!

Is it time to recharge your podmod? Get a USB-C cable (not included) and connect it to the port located below your e-cigarette.

The USB-C port of Voopoo's Doric Galaxy S1 podmod

The Doric Galaxy S1 cartridge

Your kit has a 2ml tank with a 0.7ohm sealed coil. This value will allow you to get a rather tight draw in indirect inhaling (MTL), close to the sensations of the traditional cigarette.

Disposable, the Doric Galaxy S1 cartridge has to be replaced by a new one when the built-in coil is used, after two to three weeks of use.

The cartridge of Voopoo's Doric Galaxy S1 podmod

Note that your podmod is also compatible with the Doric Galaxy cartridges, which include a 1.2ohm built-in coil. This value gives a vape slightly more tight compared to the original cartridge.

These cartridges (sold separately) can be matched with a Galaxy Filtre Drip Tip for sensations closer to traditional cigarettes.

How to fill my tank?

Did you choose the e-liquid flavor to go with your Doric Galaxy S1 podmod?

Get your bottle with a thin tip, then:

1. Take the cartridge off the magnetic base
2. Lift the silicon strip located on the side of the tank
3. Insert the tip of your bottle into the filling hole
4. Pour your e-liquid
5. Carefully close the strip
6. Reconnect the cartridge to the podmod

Wait for some minutes before vaping if you use a new cartridge so the coil is correctly primed with e-liquid.

The filling of the cartridge for Voopoo's Doric Galaxy S1 podmod

Box contents

• 1 800mAh Doric Galaxy S1 podmod
• 1 2ml cartridge with a 0.7ohm sealed coil (pre-installed)
• 1 user guide

The Doric Galaxy S1 podmod is made by Voopoo. It is sold without a USB-C cable.

Box contents of Voopoo's Doric Galaxy S1 podmod