Geekvape Aegis Legend 3 Kit

A third version even more impressive! Discover in this video the Aegis Legend 3 mod matched with the famous Zeus Fli clearomizer!

Are you looking for a performing but simple-to-use kit? The brand Geekvape presents an improved version of its famous Legend!

Taking the characteristics of the latter, a maximum power of 200W with a functioning of 18650 dual batteries (not included), it has a new chipset as handy as it is quick. Find a locking system or a 'Memory' mode to save your settings according to your clearomizers and atomizers.

No kit without a tank. The manufacturer hasn't done things by halves and accompanies its mod with the Zeus Fli clearomizer, featuring a hinged opening system and compatible with Z-series coils. This tank is primarily intended for sub-ohm enthusiasts and makes the most of a 5.5ml capacity, no less!

Geekvape's Aegis Legend 3 kit

A revolutionary locking system

Geekvape breaks the locking codes to give you an even safer vape experience thanks to its AS Chip 4.0 chipset. In fact, the manufacturer is banking on a totally new mode.

With its 'Touch Lock', the manufacturer simply invites you to hold your mod in your hand and watch it unlock as if by magic. When you put it down again, it locks instantly. Please note, however, that this system only works with bare hands.

Rest assured, if you need to wear gloves in winter, you'll enjoy the 'Button Lock' mode, which locks the adjustment switches to prevent accidental pressing.

Finally, the 'Unlock Mode' allows you to completely unlock the mod. All these options are accessible via the Legend III electronic mod menu.

The 'Touch Lock' mode of Geekvape's Aegis Legend 3 kit

A tried-and-tested design

The brand Geekvape comes back with an elegant mod. Its dimensions of 140.5 x 55.4 x 29mm allow you to easily slide it in a handbag or in the biggest pockets for example. The 24mm diameter perfectly holds the Zeus Fli clearomizer to create a harmonious set.

Its 247g weight (without batteries), its zinc alloy conception, and its leather effect coating ensure safe handling. This mod is IP68 certified guaranteeing resistance to shocks, dust, and water.

Its main side offers easy handling thanks to a large Fire button, two setting buttons, and a large 0.96" color screen which indicates all the information related to your vape.

Handling of Geekvape's Aegis Legend 3 mod

A complete functioning

This mod is meant for sub-ohm beginners or experts. Indeed, the manufacturer Geekvape bets on a multitude of modes offering a simplified vape experience:

• SMART mode: Automatically defines the power in watts according to the coil installed
• BOOSTING mode: Automatically adjust the maximum power in Watts according to the coil installed
• ECO mode: reduces the energy consumption
• POWER mode: classic mode allowing to set the power between 5 and 200W manually
• MEMORY mode: 5 setting memorization locations for simplified use with multiple tanks

For expert users and rebuildable enthusiasts, you'll find a TCR mode that allows temperature control.

Its chipset guarantees a constant output power even when your batteries start to fail. This electronic mod integrates a multitude of protections for a serene vape.

The 0.96" color screen of Geekvape's Aegis Legend 3 kit

A great capacity

By choosing a functioning thanks to two 18650 batteries (not included), Geekvape allows you to not worry about a recharge.

To easily remove the batteries, slide the switch on the underside of the mod to access the cover. You'll find all the polarity indications on the bottom of the hatch, as well as on the opening.

The 18650 dual battery compartment of Geekvape's Aegis Legend 3 kit

Although it's always best to charge your batteries in a dedicated charger (not included), you'll find a USB-C port protected by a silicone tab above the Fire switch, as well as an included cable, so you can charge your mod directly without having to remove the batteries.

The USB-C port of Geekvape's Aegis Legend 3 kit

The Zeus Fli clearomizer as an ally

Geekvape has the choice to accompany its mod with a famous Zeus Fli clearomizer. Made popular thanks to its sub-ohm vape, but also its hinged opening, this tank perfectly goes with this mod.

With a bulb tank with a 5.5ml capacity, its 810 drip tip and its compatibility with the Z Series coils, this clearomizer is meant for an airy vape in direct inhaling (DL).

The Zeus Fli clearomizer of Geekvape's Aegis Legend 3 kit

Compatibility with the Z Series coils

Inside the box of the Aegis Legend 3 kit, you'll find two coils:

• 0.15ohm Z Series XM (pre-installed) for a power range from 70 to 85W
• 0.4ohm Z Series XM for a power range going from 50 to 60W

You can get a spare pack of Z Series coils to have a spare solution if needed.

As soon as you feel a loss of flavors or a light burnt taste, it will be time to proceed to the filling of the coil. For this, don't hesitate to follow the guide below:

1. Unscrew the bottom part of Zeus Fli clearomizer
2. Pull on the used coil to take it off (N.B: you can use the small pliers included)
3. Soak a new coil with some drops of e-liquid
4. Put it in the same place as the old one
5. Screw the bottom part of the clearomizer
6. Fill it with e-liquid
7. Wait 5 to 10 minutes so the new coil is correctly primed in e-liquid

An adjustable top airflow

To easily adjust the air supply in your vape, the brand Geekvape bets on an airflow located on the top of the clearomizer, reducing the risks of leakages.

To set the airflow, simply turn the top ring to open more or less the air intake windows. As a reminder, the more they are open, the more the draw will be airy.

The airflow ring of Zeus Fli clearomizer on Geekvape's Aegis Legend 3 kit

5.5ml of capacity

The manufacturer hasn't done things by halves with its clearomizer. The bulb pyrex allows you to pour up to 5.5ml of your e-liquid.

However, sooner or later, you'll have to fill it with this tank. For this, don't hesitate to take your e-liquid bottle and follow the guide below:

1. Make the hinged top cap flip towards the back
2. Insert the bottle tip in the filling hole
3. Pour your e-liquid up to three-quarters of the tank
4. Clip the top cap of the Zeus Fli clearomizer

In case you install a new coil, make sure you wait 5 to 10 minutes before vaping.

The filling of Zeus Fli clearomizer from Geekvape's Aegis Legend 3 kit

Box contents

• 1 200W Aegis Legend 3 mod
• 1 5.5ml Zeus Fli clearomizer
• 1 0.15ohm Z Series XM coil (pre-installed)
• 1 0.4ohm Z Series XM coil
• 1 USB-C cable
• 1 spare pyrex
• 1 set of accessories
• 1 user guide

The Aegis Legend 2 kit is made by the brand Geekvape. It is sold without batteries.

Box contents of Geekvape's Aegis Legend 3 kit