Geek Vape Z Series Coils (x5)

The Zeus Sub-Ohm clearomizer has earned its place in the Zeus family from Geek Vape, alongside the Obelisk Tank and the 2021 version of the Zeus Tank, featured in the Aegis Legend 2 kit.

And if the flavor rendering is optimal, it's thanks to the Mesh coils, designed specifically for the Zeus, Zeus 2021, Obelisk, and Z Sub Ohm SE from Geek Vape.

A pack of 5 mesh coils!

To make the most of an avalanche of realistic flavors and XXL vapor production, the manufacturer offers you a choice of five coil packs:

• 5 Mesh Z0.15 coils, made of Kanthal A1. With a value of 0.15 ohms, they can be set between 80 and 90 watts
• 5 Mesh Z0.2 coils, made of Kanthal A1. With a value of 0.20 ohms, they should be used between 70 and 80 watts
• 5 Mesh Z0.25 coils, also made of Kanthal A1, Dual Coil. Available in 0.25 ohms, these coils should be used at a power range between 45 and 57 watts
• 5 Mesh Z0.4 coils, made of Kanthal A1. With a value of 0.40 ohms, they should be set to a power range between 50 and 60 watts
• 5 XM Mesh Z0.4 coils, made of Kanthal A1. With a value of 0.4 ohms, to be used between 50 and 60 watts
• 5 XM Mesh Z0.15 coils, made of Kanthal A1. With a value of 0.15 ohms, they should be set between 70 and 85 watts
• 5 Z0.15 XM Boost Version with a value of 0.15ohm, to use between 70 and 85 watts
• 5 Z0.2 XM Boost Version with a value of 0.2ohm, to use between 70 and 80 watts
• 5 Z0.4 XM Boost Version with a value of 0.4ohm, to use between 50 and 65 watts

Please note, if you have a P Subhom clearomizer, do not choose the Mesh Z0.25 ohm coils, as they are not compatible with your clearomizer.

The right balance between flavor and power

All made from high-quality Kanthal A1, these sub-ohm mesh coils ensure a good volume of vapor and optimal flavor rendering.

Thanks to their mesh construction, these coils provide a larger heating surface. But above all, they are very robust, ensuring an excellent lifespan.

Coil set-up

Follow these instructions to set up the new coil in your Zeus Sub-Ohm clearomizer:

• Remove the Pyrex tank from your clearomizer
• Unscrew the old coil
• Screw the new coil in its place
• Screw the Pyrex tank back in place
• Fill up the tank and wait for a few minutes

We recommend you properly prime your coils before using them by pouring a few drops of e-liquid on the cotton wicks and letting them sit for a few minutes inside a full tank.

These packs of 5 Mesh Z Coils for Zeus Sub-Ohm, Zeus Sub Ohm 2021, and Obelisk Task are made by Geek Vape.