Vaporesso Armour Max Kit
A 220W drop-proof DL kit powered by two 21700 batteries!
-
Maximum power220w
-
Volume8ml
-
Battery type18650 x2 or 21700 x2
-
Brand
Discover a powerful kit that will follow you everywhere! Vaporesso offers you the Armour Max kit, a sturdy electronic cigarette powered by two 21700 batteries (not included) that can deliver up to 220W!
This great kit also includes the legendary iTank 2 clearomizer, ideal for airy vaping with a direct inhale (DL). Enjoy a wonderful e-cigarette fitted with protection against drops and dust.
Vaporesso's Armour Max kit
An armor made of steel and TPU
Discover the Armour Max, a powerful and sturdy kit from Vaporesso. Made from stainless steel and TPU (thermoplastic), it is extremely durable and protected against drops and scratches.
This massive mod is topped with the iTank 2 clearomizer, making this electronic cigarette very impressive and contemporary looking.
It is ergonomic and pleasant to handle thanks to its 56.5x157x34mm size and 286g weight (without the batteries).
From top to bottom, the main side of your Armour Max is adorned with:
- A Fire button (also serves as a lock button)
- A 0.96" TFT screen
- 'Up' and 'Down' buttons
- A USB-C charge port
Handling Vaporesso's Armour Max kit
Up to 220W and 4 vaping modes
Press the Fire button 5 times in a row to switch on/off your kit.
Press this same button 3 times in a row to open the menu and select a vaping mode. The great 0.96" TFT screen allows you to switch between the 4 different modes provided by the Axon chipset:
- F(t) mode: this default mode allows you to adjust the power from 5 to 220W
- PULSE mode: enjoy a pulse tension output, ideal for optimal flavor rendering
- ECO mode: extend the durability of your battery
- TC mod (Ni, Ti, SS): allows you to adjust the temperature to the coil wire type you're using; use it if you've switched your iTank 2 clearomizer for an atomizer
Your Armour Max kit is also fitted with two clever lock systems:
- Easy Lock: lock the Fire button by sliding it from bottom to top
- Lock your e-cigarette by pressing the 'Up' and 'Down' buttons simultaneously
The 0.96" TFT screen of Vaporesso's Armour Max kit
A massive capacity: two 21700 batteries
Vaporesso decided to power this monstrous kit with two 21700 batteries (not included). Press the lock button opposite the main side of the kit to access the battery compartment below the kit.
Refer to the '+' and '-' marks to insert your batteries the right way (positive and negative terminals).
Note that your kit is delivered with two adaptors to replace your 21700 batteries with 18650 batteries.
The dual-battery compartment of Vaporesso's Armour Max kit
If you ever forget to charge your batteries, you'll be happy to know that Vaporesso fitted its kit with a USB-C port! Use the USB-C cable included in the box to charge your kit.
However, we recommend you favor using an external charger (not included) to preserve the durability of your batteries.
The USB-C charge port of Vaporesso's Armour Max kit
The iTank 2: a clearomizer made for cloud chasing
Vaporesso's Armour Max kit is clearly made for cloud chasers! Indeed, your massive mod is fitted with the iTank 2 clearomizer, an 8ml bulb tank, and an 810 drip tip. This combination is perfect for enjoying an airy vaping experience with a direct inhale (DL). The box of your kit also contains a 5ml straight Pyrex.
To make this kit fully drop-proof, the manufacturer created a TPU armor that protects both your electronic mod and the Pyrex of your clearomizer!
The iTank 2 clearomizer from Vaporesso's Armour Max kit
Vaporesso's GTi coils
Enjoy massive, flavorful clouds of vapor thanks to the iTank 2 clearomizer and its GTi coils designed for an airy draw with a direct inhale (DL).
Your kit is delivered with 2 GTi coils:
- One 0.4ohm MESH GTi coil: to be used between 50 and 60W
- One 0.2ohm MESH GTi coil: to be used between 60 and 75W
Proceed as follows to replace your coil (every 2-3 weeks generally):
- Remove the clearomizer from the mod
- Unscrew the lower part of the clearomizer (near the airflow ring)
- Remove the worn-out coil
- Take a new coil, soak it with a few drops of e-liquid, and insert it into the dedicated slot
- Screw back the lower part of the clearomizer
- Fill your tank
- Wait for 5-10 minutes to make sure the new coil is primed
An effective dual-airflow system
The iTank 2 clearomizer is fitted with an airflow ring that you can twist to adjust the draw.
Switch between a loose or a slightly tighter draw in no time at all thanks to the bottom-airflow system with two air intakes!
The airflow ring of the iTank 2 clearomizer from Vaporesso's Armour Max kit
An 8ml bulb Pyrex with a top-fill system
Even though your clearomizer has a large 8ml e-liquid capacity, you'll need to refill it at some point.
Proceed as follows:
- Push the button on the top cap to remove it and access the filling hole
- Insert the tip of your e-liquid bottle into the dedicated hole
- Fill up the tank
- Close the top cap
- Wait for 5-10 minutes to make sure your new coil is primed
The top-fill system of the iTank 2 clearomizer from Vaporesso's Armour Max kit
Contents of the box
- One Armour Max 220W mod
- One iTank 2 clearomizer with a pre-installed protection
- One 0.4ohm MESH GTi coil
- One 0.2ohm MESH GTi coil
- Two 18650 battery adaptors
- One 5ml straight Pyrex
- One USB-C cable
- One set of spare parts
The Armour Max kit is manufactured by Vaporesso. It is delivered without batteries.
Contents of the box of Vaporesso's Armour Max kit
Maximum power | 220w |
---|---|
Volume | 8ml |
Battery type | 18650 x2 or 21700 x2 |
Height | 157mm |
Material | Stainless steel and TPU |
Width | 56.5mm |
Depth | 34mm |
Mod type | Box |
Batteries included | No |
Weight | 286g |
Mod type | Electronic |
USB charging | Yes |
Chipset | Axon Chip |
Chipset version | Vaporesso |
Compatible coils | GTi coils |
Temperature control | Yes (Ni200 - Titanium - SS316) |
Tank | Pyrex |
Fill type | From above |
Drip-tip | 810 |
Connector pin | 510 |
Configuration | Variable Wattage / Variable Voltage |
Your comment cannot be sent
feedback Report a comment
Abuse report sent
Your report cannot be sent