Geekvape Aegis Solo 3 3,000mAh Kit

The brand Geekvape offers a kit made around the Aegis Solo 3 mod with a 3,000mAh built-in battery and a Z Sub Ohm clearomizer with a 5.5ml capacity.

It delivers power going from 5 to 100W and has an innovative locking system that activates or deactivates by simply taking the mod in hand.

Made around a 4.0 chipset, it offers several functioning modes from the simplest to the most complex by way of an ECO mode. As it is IP68 certified, you can transport it in extreme sensations.

Geekvape's 3,000mAh Aegis Solo 3 kit

A tactile locking/unlocking

Innovative, the Touch Lock system allows you to unlock or lock your mod by simply taking it in hand. This mode can be deactivated for a more classic functioning.

The Touch Lock system of Geekvape's Aegis Solo 3 kit

Made from zinc alloy and stainless steel, this kit offers dimensions of 137.4 x 40.9 x 27.6mm and a weight of xxg. It is IP68 certified (shock-resistant, dustproof, and waterproof) for great transport and use.

You'll find on the front side:

• The Fire button
• The 0.96" color screen
• The setting buttons

Handling of Geekvape's 3,000mAh Aegis Solo 3 kit

How does the 3,000mAh Aegis Solo 3 kit work?

The 3,000mAh Aegis Solo 3 mod is associated with the Z Sub Ohm clearomizer which makes a kit meant for the airy draw in direct inhaling (DL).

Meant for medium users, or more experts, you can choose between several functioning modes according to your vape preferences and habits:

• POWER mode: manual adjustment of the power from 5 to 100W
• SMART mode: automatic setting of the power according to the coil installed into the clearomizer
• BOOSTING mode: selection of the highest power handled by the coil used
• ECO mode: selection of the lowest power handled by the coil
• TCR mode: temperature setting according to the type of the coil wired used (if you use an RBA atomizer instead of the Z Sub Ohm clearomizer)
• MEMORY mode: setting savings (up to 5) according to the type of coil installed

The screen of Geekvape's Aegis Solo 3 kit

A 3,000mAh built-in battery

Here, no need for a battery. Indeed, the mod has a built-in battery with a 3,000mAh capacity allowing you to vape for a long time.

Refer to the display to quickly see how much battery power is left. Once the battery level is low, connect the included USB-C cable to your electronic cigarette and an external power source.

The USB-C port of Geekvape's 3,000mAh Aegis Solo 3 kit

The Z Sub Ohm clearomizer

On top of the Aegis 3 mod, there's the Z Sub Ohm in the 2021 version.

With a diameter of 24mm, this clearomizer has a 5.5ml bulb tank. It also has a top airflow.

It requires the use of Z Series coil, you'll find two in the box before you start vaping.

The Z Sub Ohm clearomizer of Geekvape's 3,000mAh Aegis Solo 3 kit

The Z Series coils

With this kit, you'll find no less than 2 coils made from MESH for good reactivity.

You'll find in the box:

• 1 0.2ohm Z Series coil: to use between 70 and 80W
• 1 0.4ohm Z Series coil: to use between 50 and 60W

Please note that the Z Sub Ohm clearomizer is also compatible with all the collection of Z Series coils.

To insert the coil in your clearomizer, follow the guide below:

1. Unscrew the bottom part of Z Sub Ohm
2. Soak a new coil with some drops of e-liquid
3. Insert the coil into the compartment by slightly pulling on it
4. Screw the base of the clearomizer back
5. Fill the tank with e-liquid
6. Wait for some minutes before vaping it so the new coil is correctly primed with e-liquid

To take a used coil off the clearomizer, use the key included in the box.

The top airflow of the Z Sub Ohm

The clearomizer of this kit has top airflow, avoiding leaks.

To set the airflow, you only have to turn the ring to free more or less the holes.

The more the holes are close, the more the draw will be restrictive, being tight.

The top airflow of Z Sub Ohm clearomizer of Geekvape's Aegis Solo 3 kit

How to fill your tank with e-liquid?

To fill your tank, you'll find a top filling system.

As soon as you have to fill your 5.5ml tank, take your e-liquid bottle and then:

1. Unscrew the top cap of the clearomizer
2. Insert the tip of your bottle into one of the two filling holes
3. Pour your e-liquid, careful, never pour something into the central chimney hole
4. Carefully screw the top cap
5. Wait 5 to 10 minutes before vaping if you use a new coil

Filling of Z Sub Ohm clearomizer of Geekvape's Aegis Solo 3 kit

Box contents

• 1 3,000mAh Aegis 3 mod
• 1 Z Sub Ohm clearomizer
• 1 0.2ohm Z Series coil
• 1 0.4ohm Z Series coil
• 1 USB-C cable
• 1 spare Pyrex
• 1 set of spare pieces
• 1 user guide

The 3,000mAh Aegis Solo 3 kit is made by Geekvape.

Box contents of Geekvape's 3,000mAH Aegis Solo 3 kit