Geek Vape Aegis Boost 2 B60 Podmod

Aegis Boost B60, a pod resisting bumps and water

If you're a beginner or an expert, this electronic cigarette with a built-in 2000mAh battery and a power of 60W will offer you a compact and light format, a simplified and secure use, but that is still versatile!

Its benefit? The Aegis Boost 2 B60 podmod has filled all the requirements of sturdiness and waterproofness. That is why it has the best certification that you can find: IP68!

The design of the Aegis Boost 2 B60 podmod

The Aegis Boost 2 B60 podmod is really complete. It is why the construction was so well-made: its body is sturdy but stays light, and its materials are of great quality. Its format wants to stay compact and its design particularly elegant, in the spirit of the traditional Aegis Boost of the manufacturer.

With 111mm of height, 30mm of width, and 39mm of depth, the Aegis Boost 2 podmod only weighs 156 grams. Really comfortable in the hand, and it also resists daily challenges. It is certified IP68!

The Aegis Boost 2 B60 podmod by Geek Vape

How does the Aegis Boost 2 B60 podmod work?

The Aegis Boost 2 B60 podmod does not have preferences. With all its innovations, it can be used by vape beginners and more experts.

It also chooses an operation of pod mod! Its built-in battery of 2000mAh has a magnetic base and a magnetic cartridge with 5ml of capacity.

The setup is simple, and all the systems are convenient.

How does the Aegis Boost 2 B60 podmod work?

With aAS Chip 3.0 chipset by Geek vape, the Aegis Boost 2 B60 podmod fuel up of performances and innovations. It enables up to 60 watts of power, diverse modes of vape, all the necessary electronic protections, a colored screen, reactive adjustment buttons, and even a locking system:

• Smart mode: secure your vape and automatically stay within the range of power recommended by the manufacturer for your coil
• Boosting mode: automatically adjusts the power at the highest point (within the range of power recommended by the manufacturer for your coil)

With a colored TFT screen of 0.96 inch with curved borders, and two small adjustment buttons. Stay informed on the level of the battery, the used mode, the chosen power, or the value of your coil, and with number of puffs while adjusting each one of the settings!

The screen of Aegis Boost 2 B60 podmod by Geek Vape

Like all its siblings, the Aegis Boost 2 B60 gets an innovative locking system of Geek Vape: an A-Lock button on the side, enabling you to close your equipment in a single move.

The closing button of the Aegis Boost 2 B60 podmod by Geek Vape

A 2,000mAh built-in battery

The Aegis Boost 2 B60 podmod by Geek Vape is powered thanks to a 2,000mAh built-in battery. The latter is capable of lasting all day, without problems.

When it needs energy, it can easily be recharged with its USB-C type, on the main side, just under the screen, and two adjustment buttons, and efficiently protected by a silicone strip.

N.B.: Besides, in the delivery box, you'll find a USB-C recharging cable.

The USB-C recharging port of the Aegis Boost 2 B60 podmod by Geek Vape

A 5ml cartridge

Magnetically connected to the base of the built-in Aegis Boost 2 B60 battery, discover the performing Aegis Boost 2 B60 cartridge by Geek Vape. A sturdy tank, specially made for this electronic cigarette, with a capacity of 5ml, an ingenious system of sliding airflow, and an intuitive filling, at the top.

This cartridge only works with the B Series coils of the manufacturer.

The cartridge of Aegis Boost 2 B60 podmod by Geek Vape

The B Series coils

Specially made to have B Series coil of the manufacturer, the cartridge of the Aegis Boost 2 B60 podmod will promise diverse sensations, from a pure session in MTL, to a cloudier session in DL.

Compatible with this collection of the coil, the Aegis Boost 2 podmod already has two :

• B Series coil 0.2Ω (already installed inside the cartridge). You'll use it from 50 to 58 watts.
• B Series coil 0.6Ω (in the box). You have to adjust it between 15 and 25 watts.

Your B Series coil can be changed. We recommend proceeding with its replacements every 2 to 3 weeks. To do that:

1. Unclip the cartridge from the magnetic base of the podmod
2. Put it upside down
3. Use the key to take off the used coil
4. Unwrap a new one and soak it in some drops of e-liquid to prime it
5. Insert it in the center of the cartridge, in the place of the old one

The B Series coils of the Aegis Boost 2 B60 podmod

The airflow of Aegis Boost 2 B620 podmod

On the back part of the cartridge, there's a system of airflow. It has a simple sliding mechanism, to adjust from right to left by helping yourself with the small button.

Open it widely and you'll get an aerial airflow. Slightly close or almost completely, and will go on a more restrictive, even tight, draw.

How to fill the cartridge?

The cartridge of the Aegis Boost 2 B60 podmod by Geek Vape will propose a capacity of 5ml.

When you need to fill, you'll find it particularly easy and intuitive thanks to its top-fill recharging system. You just need to:

1. Lift the silicon cap on the top of your cartridge
2. Insert the cap of your e-liquid into your bottle
3. Recharge, without filling it to the top
4. Replace the silicon cap
5. Wait for some minutes (for a good prime of the coil)

The filling system of the Aegis Boost 2 B60 podmod by Geek Vape

Content of the box

• A built-in battery Aegis Boost 2 B60 -2000mAh
• An Aegis Boost 2 cartridge - 5ml
• A B Series coil 0.2ohm (pre-installed)
• A B Series coil 0.6ohm
• A tool for coil
• A USB-C recharging cable
• A user manual

The Aegis Boost 2 B60 podmod is made by Geek Vape.

The content of the box of the Aegis Boost 2 B60 podmod by Geek Vape