Voopoo Vinci Spark 220 Kit

With the Vinci Spark 220, Voopoo is meant for vapers looking for capacity, power, and aesthetics.

This kit associates the performing Vinci Spark 220 mod to the Uforce X, a clearomizer clearly meant for DL, being an airy draw in direct inhaling.

Synonymous with capacity, this electronic cigarette is powered by a dual 18650 battery (not included), and offers a capacity of 5.5ml via its bulb tank.

The TFT screen and the settings wheel allow you to access various operating modes.

Voopoo's Vinci Spark 220 kit

84 LEDs illuminating your kit!

The particularity of the Vinci Spark 220? An ergonomic structure associated with a design with an LED theme.

Also, as soon as the mod is switched on by pressing the Fire switch five times in succession, a sparkling bright animation appears on the main side of the mod.

The luminous animation of Voopoo's Vinci Spark 220 kit

Your kit has dimensions of 148x45x29mm for a weight of 176g.

The electronic mod made of aluminum alloy also offers:

• 1 1.47" TFT color screen
• 1 switch button included in the setting wheel
• 1 locking switch
• 1 USB-C port
• 1 magnetic panel covering the dual battery compartment

On the base of the mod, there's the Uforce X clearomizer by Voopoo, connected through its standard 510 pin.

Handling of Voopoo's Vinci Spark 220 kit

The functioning modes of the Vinci Spark 220 kit

According to your vape preferences, several use modes are offered.

Push three times on the Fire button to enter the kit's mode, then select the mode that suits you among:

• SMART mode: the Gene TT chipset automatically adjusts the power according to the value of the coil installed in your Uforce X clearomizer
• RBA mode: manually set the power delivered, from 5 to 220W
• TC/TCR mode: it allows you to set the temperature according to the type of wire used in your build. This mode is exclusively meant for use in rebuildable, in other words, if you replace the Uforce X clearomizer with an RBA atomizer

The menu of Vinci Park 220 also offers to customize your experience by allowing you to change the screen theme, deactivate the LED animation, or reset the puff counter.

The screen of Voopoo's Vinci Spark 220 kit

Voopoo also equips its kit with a locking switch, allowing you to transport your e-cigarette safely.

Slide the toggle button located on the side of the mod to avoid any involuntary action on the Fire button or to lock the power used.

The locking switch of Voopoo's Vinci Spark 220 kit

A capacity in a 18650 dual battery

On the opposite side of the screen, a removable panel with a magnetic closing allows easy access to the dual battery compartment.

To add your two 18650 batteries (sold separately), you only have to take the magnetic panel out.

Respect the polarity directions indicated on the back of the compartment.

The advantage of a dual battery kit? An optimal capacity for long vape sessions!

The dual battery compartment of Voopoo's Vinci Spark 220 kit

Are you out of battery? Get the USB-C cable included in the kit's box and connect it to the port, located on the side of the Vinci Spark 220 mod.

We recommend using as much as possible an external charger for your batteries, which preserves their life span.

The USB-C port of Voopoo's Vinci Spark 220 kit

The Uforce X clearomizer

Designed for all airy vape enthusiasts, Voopoo has chosen to equip its kit with a purely sub-ohm clearomizer: the Uforce X.

The latter offers an e-liquid capacity of 5.5ml with a bulb tank.

The Uforce X is specially designed to accommodate PnP X coils, renowned for their taste performance.

The Uforce X clearomizer of Voopoo's Vinci Spark 220 kit

The PnP X coils

Compatible with all the PnP X collection, the Vinci Spark 220 kit is delivered with two coils:

• 1 0.15ohm PnP X coil: for a very airy draw in direct inhaling (DL), to use between 60 and 80W
• 1 0.3ohm PnP X coil: for a slightly more tight vape in restrictive direct inhaling (RDL), to use between 32 and 40W

After two to three weeks, your coil starts to show some wear signs, such as a loss of flavors or a light burnt taste.

It will be time to replace it with a new one.

For this:

1. Unscrew the bottom part of the Uforce X clearomizer
2. Take the used coil out
3. Soak a new coil with some e-liquid drops
4. Insert it in its compartment in place of the old one
5. Screw the bottom part back
6. Fill the tank with e-liquid
7. Wait for some minutes before vaping so the coil is correctly primed

The top airflow of Uforce X

The clearomizer of the Vinci Spark 220 kit is equipped with an airflow ring located on the top part.

Go from an airy draw to a more restrictive vape by simply turning the airflow ring.

The more you free the hole, the more the vape is cloudy!

The airflow of the Uforce X clearomizer of Voopoo's Vinci Spark 220 kit

An easy and clean filling

Simple and quick, the filling of your tank is made by the top of the clearomizer.

To recharge your clearomizer with 5.5ml of e-liquid, you only have to:

1. Push the top cap of Uforce X up to the mark to free the filling hole
2. Insert the thin tip of your bottle
3. Softly pour your e-liquid
4. Close the top cap

Wait for 5 to 10 minutes before vaping if you use a new coil.

The filling of the Uforce X clearomizer of Voopoo's Vinci Spark 220 kit

Box contents

• 1 Vinci Spark 220 mod
• 1 Uforce X clearomizer
• 1 0.15ohm PnP X coil
• 1 0.3ohm PnP X coil
• 1 spare Pyrex
• 1 USB-C cable
• 1 user guide

The Vinci Spark 220 kit is made by Voopoo. It is sold without batteries.

Box contents of Voopoo's Vinci Spark 220 kit