Innokin GOZEE GO Z+ Kit

With the GOZEE kit, Innokin made no compromise: light, compact, and sturdy, this kit also has a 60W maximum power.

Innokin has made no compromises with its GOZEE kit. It’s lightweight, compact, and solid, and capable of reaching a maximum power of 60w.

It’s equipped with a built-in battery of 2,100mAh, enabling a great capacity.

Thanks to its simple functioning, it suits beginners as well as experts.

The design of the GOZEE GO Z+ kit

Innokin made this electronic cigarette easy to use, but it has not neglected the kit’s aesthetic.

The colored plastic is injection-molded beneath the transparent layer, making it look like a crystal-wrapped device, revealing a modern design.

Moreover, the GOZEE mod is very compact, measuring only 119x35x27mm, for a weight of 73g.

Made from PC and ABS plastic, the mod is durable and also accommodate any atomizer or clearomizer with a diameter of 24mm.

Innokin’s GOZEE GO Z+ kit

Easy-to-use

Innokin has come up with a particularly simple chipset for this mod. There are no complicated settings; you just have to increase or lower the power (in watts) that is displayed on the small screen, using the '+' and '-' buttons on the bottom of the mod.

This screen shows you all the basic information you might need to know, such as power, battery charge, or puff count.

Of course, this chipset is equipped with various electronic protections so that you can safely vape. With the GOZEE mod, there is no risk of short-circuiting, dry hits, or power surges!

The display screen of Innokin’s GOZEE mod

A 2,100mAh built-in battery

The GOZEE kit has a built-in battery with 2,100mAh capacity.

It’s easy to charge as well. Just plug it into the mains using the cable provided. The 2A USB-C port is located beneath the buttons.

The USB-C port of Innokin’s GOZEE mod

The GO Z+ clearomizer

Made from PCTG, the GO Z+ clearomizer has a diameter of 24 mm and a capacity of 3.5 ml.

Innokin’s GO Z+ clearomizer

Compatible with the Z-Series coils

For the GO Z+ clearomizer coils, Innokin has chosen reliability: the coils from the Z-coil series, which have already proven themselves with many other clearomizers!

Solid, they are long-lasting and designed to deliver the optimal flavors of your e-liquids. This kit includes a 0.8ohm Z-coil (pre-installed) designed for indirect inhaling (MTL) and use between 14W and 17W, as well as a 0.30ohm Z-coil designed for restrictive direct inhaling (RDL) and use between 30W and 40W.

To change your used coil with a new coil, you only have to:

• Unscrew the base of the clearomizer
• Pull on the old coil
• Insert the new coil previously soaked with e-liquid

Screw back the clearomizer, refill the tank, and wait for some minutes.

The 0.8ohm Z-Series coil for Innokin’s GO Z+ clearomizer

A precise airflow for realistic flavors

When it comes to the airflow of the GO Z+, Innokin has focused on 'efficiency and simplicity'. Located at the bottom of the clearomizer, it is both easy and precise to adjust.

Simply rotate the transparent airflow ring to the left or right to switch from a tight draw with indirect inhalation to a more airy draw with restrictive direct inhalation.

The air intakes of Innokin’s GO Z+ clearomizer

How to fill the 3.5ml of the GO Z+ clearomizer?

The GO Z+ clearomizer has a 3.5ml tank. It is filled from the top using a sliding top cap system, designed to limit the risk of leakage.

To fill your GO Z+, simply:

1. Push the top cap to slide it to the side
2. Insert the tip of your e-liquid bottle into the compartment
3. Fill the tank, close it, and vape

Please note: if you are using a new coil, we recommend waiting about ten minutes after filling to allow the cotton to soak up the e-liquid.

Filling Innokin’s GO Z+ clearomizer

Box contents

• The GOZEE electronic mod
• The GO Z+ clearomizer
• One 0.8ohm Z-coil
• One 0.3ohm Z-coil
• A spare 510 drip tip
• A USB-C cable
• A user guide

The GOZEE GO Z+ kit is manufactured by Innokin.

Box contents of Innokin's GOZEE 21000mAh GO Z+ kit