BD Vape Blaster Gun Edition Kit

Because they're made for each other, BD Vape combines the Blaster mod with the Precisio Sub-Ohm Blaster clearomizer, offering a performing, design, and qualitative kit.

Compatible with the BDC coils, this electronic cigarette in a tube format is meant for enthusiasts of cloudy draw in direct inhaling (DL).

Supplied with a 21700 or 18650 battery with the adaptor included, its mechatronic mod is used via a single bypass mode. Operating similarly to a mechanical mod, its mosfet chipset still allows you to benefit from minimal electronic protection.

Please note that the Blaster Gun Edition kit requires knowledge of mechanical equipment.

BD Vape's Blaster Gun Edition kit

A Gun Edition look for a tube format

If you're reading this, you're probably a fan of tube-shaped devices. So here's something for you: a kit meticulously crafted by BD Vape for its Gun Edition, combining a mechatronic mod with a sub-ohm clearomizer.

This e-cigarette has an elongated look, measuring 155mm long and 30mm wide, and weighs 168g.

Its mod is made of stainless steel with holes of various sizes, for a sleek, high-quality design.

And as tube enthusiasts know, this format offers optimal ergonomics when handling!

Handling of BD Vape's Blaster Gun Edition kit

A kit without buttons or settings

In terms of use, the Blaster Gun Edition kit offers a single operating mode, Bypass mode.

Its single switch allows you to turn your mod on and off, as well as to vape.

Designed to recreate the feel of a mechanical mod, your kit still includes a mosfet chipset to ensure minimum electronic safety.

With no switch or settings, the power delivered is directly linked to the voltage of the battery inserted in the tube and the value of the coil used in the clearomizer.

The Fire button of BD Vape's Blaster Gun Edition kit

A capacity in a single battery

Designed to be powered by a 21700 battery, you can also use an 18650 battery thanks to the included adapter.

To insert your battery (not included), simply unscrew the cover beneath the kit and insert the battery in the correct direction (positive pole at the bottom).

Stay informed of the battery charge level thanks to the LED indicator light:

• Green light: voltage higher than 3.8V
• Blue light: voltage between 3.4 and 3.8V
• Red light: voltage lower than 3.4V

The single battery compartment of BD Vape's Blaster Gun Edition kit

The Precisio Sub-Ohm clearomizer

Taking up the same Gun Edition theme as the mod, the Precisio Sub-Ohm clearomizer is designed for an airy vape with direct inhaling.

Equipped with an 810 drip tip, it is specially designed by BD Vape to accommodate the manufacturer's BDC coils.

Its 4.5ml round tank can be changed for the 2ml straight Pyrex included in the box.

The Precisio Sub-Ohm clearomizer of BD Vape's Blaster Gun Edition kit

The BDC coils

BD Vape allows you to use your Blaster Gun Edition kit as soon as you receive it, with two coils included in the box:

• 1 0.15ohm BDC coil (pre-installed): for use between 60 and 75W for a very cloudy vape
• 1 0.20ohm BDC coil: to be used between 60 and 70W for a slightly less airy draw

Once your coil is worn out, simply change it for a new one.

To do this:

1. Remove the lower part of the Precisio Sub-Ohm clearomizer by unscrewing it
2. Gently pull on the old coil to remove it
3. Soak a new coil in e-liquid
4. Then insert it into its housing in place of the old one
5. Put the bottom part of the clearomizer back on
6. Fill the tank with e-liquid

Wait a few minutes before vaping to allow the new coil to soak up the e-liquid properly.

Adjustable air intakes

The Precision Sub-Ohm clearomizer has a top filling system, thought to prevent any risk of leakage.

To easily and quickly switch between a very airy draw and a slightly tighter vape, simply rotate the ring located just beneath the top cap.

The top airflow of the Precisio Sub-Ohm clearomizer on BD Vape's Blaster Gun Edition kit

A top filling

Whether you have opted for the original 4.5ml Pyrex bulb or the 2ml straight tank, you will benefit from a top-fill system in both cases.

So, when it's time to fill the clearomizer with e-liquid, all you have to do is:

1. Turn the top part a quarter turn to remove it
2. Insert the dropper into the filling hole
3. Pour in your e-liquid
4. Put the top cap back on by screwing it a quarter turn

As a reminder, wait 5 to 10 minutes before vaping if you are using a new coil.

The filling of the clearomizer of BD Vape's Blaster Gun Edition kit

Box contents

• 1 Blaster Gun Edition mod
• 1 4.5ml Precisio Sub-Ohm Gun Edition clearomizer
• 1 2ml straight Pyrex
• 1 bag of spare pieces
• 1 user guide

The Blaster Gun Edition kit is made by BD Vape. It is sold without batteries and requires extensive knowledge of mechanical devices.

Box contents of BD Vape's Blaster Gun Edition kit