Voopoo Vinci Spark 100 Kit

A versatile vape, as performing in DL as in MTL? Discover the Vinci Spark 100 mod matched with Uforce-X Nano clearomizer!

The brand Voopoo has an all-included kit with a mod and a clearomizer for a versatile vape in DL as well as in MTL.

The mod offers a powerful vape up to 100W and works with an 18650 battery (not included). Its lateral side has a system of 144 LEDs customizable between three themes. It has an ON/OFF switch for worry-free transport.

The Uforce-X Nano clearomizer makes this kit offer an airy just like a tighter vape, thanks to its compatibility with the PnP X coils. It has a top filling system and a top airflow limitation the risk of leaks.

Voopoo's Vinci Spark 100 kit

A design composed of 144 LEDs

The Vinci Spark 100 kit stands out by its right side with 144 LEDs as soon as the mod is on.

The luminous animation of Voopoo's Vinci Spark 100 kit

Its conception in aluminum alloy makes it lighter with a weight of only 156.5g and with the clearomizer installed. The total dimensions of the kit are 143 x 33 x 28mm, giving it a safe handling.

Its front side is composed of:

• 1 round Fire button with LED light
• 1 0.96" TFT color screen
• 2 setting buttons
• 1 locking switch
• 1 USB-C port

Thanks to its 510 standard connection, the mod can easily be associated with another clearomizer or atomizer on the market.

Handling of Voopoo's Vinci Spark 100 kit

How does the kit work?

Meant for intermediate users, the brand Voopoo made this kit to be easy. Here, you'll benefit from three functioning modes:

• RBA mode: manually adjust the power, from 5 to 100W
• SMART mode: let the chipset automatically define the power according to the coil type used in your clearomizer.
• ECO mode: the mod goes on battery saving mode to preserve the lifespan of your battery

The screen of Voopoo's Vinci Spark 100 kit

Don't hesitate to activate the locking switch to avoid any accidental pushes on the mod's buttons!

The switch of Voopoo's Vinci Spark 100 kit

A 18650 single-battery supply

The manufacturer Voopoo has equipped its kit with an 18650 battery compartment to enable you to enjoy long vape sessions.

To access it, simply remove the magnetized panel using the small recess on the underside of the mod, and make sure you observe the correct polarity for a safe vape.

The 18650 single battery compartment of Voopoo's Vinci Spark 100 kit

In case of emergency, there's also a USB-C port on the front panel, and a cable is included.

However, we recommend that you always charge your batteries on a dedicated charger.

The USB-C port of Voopoo's Vinci Spark kit

The Uforce-X Nano clearomizer

This kit is also composed of a 4.5ml capacity and is directly filled by the top so you don't have to take the mod off.

Its compatibility with all the PnP X collection (0.3 and 0.6ohm included) gives it great versatility to try several inhaling types.

The Uforce-X Nano clearomizer has a 510 drip-tip and a standard 510 pin for compatibility with most mods on the market.

Its top airflow limits the risk of leaks for a worry-free vape and transport!

Voopoo's Uforce-X Nano clearomizer

The PnP X coils

To benefit from a large coil collection, the manufacturer Voopoo associates its clearomizer with the PnP X coils.

You'll find two coils in the box, allowing you to find the one that suits your vape habits and preferences:

• 0.3ohm PnP X (pre-installed): to use between 32 and 40W
• 0.6ohm PnP X: to use between 18 and 23W

As soon as you feel a light burnt taste or a loss of flavors, it is time to change the coil, for this:

1. Unscrew the bottom part of the clearomizer
2. Soak a new coil of some e-liquid drops
3. Insert it in its compartment by slightly pushing it
4. Screw the bottom part back
5. Fill the tank with e-liquid
6. Wait for some minutes before vaping it so the coil is correctly primed with e-liquid

The top airflow of Uforce-X Nano

So you don't have to worry about e-liquid leaks, this clearomizer features top-airflow adjustment. You can adjust your vape sensation using the large ring and the indications inside (from 0 to 3).

As a reminder, the more the hole is open, the greater the air intake and the more airy your vape.

The airflow of Voopoo's Uforce-X clearomizer

How to fill the tank?

For an easy and quick filling, the brand Voopoo gave its tank a top filling system.

In order to fill your tank, take your e-liquid bottle, then:

1. Unscrew the top part of the clearomizer
2. Insert the bottle tip in one of the two filling holes
3. Pour your e-liquid: never pour something into the central chimney hole
4. Screw the top cap back

Wait for 5 to 10 minutes if you use a new coil so it is correctly primed with e-liquid.

The filling of Voopoo's Uforce-X Nano clearomizer

Box contents

• 1 Vinci Spark 100 mod
• 1 4.5ml Uforce-X Nano clearomizer
• 1 spare Pyrex
• 1 0.6ohm PnP X coil
• 1 0.3ohm PnP X coil (pre-installed)
• 1 USB-C cable
• 1 bag of spare washers
• 1 user guide

The Vinci Spark 100 kit is made by Voopoo. It is sold without batteries.

Box contents of Voopoo's Vinci Spark 100 kit