Vaporesso GTX One Pro Kit

With its GTX One Pro, Vaporesso offers a compact electronic cigarette particularly designed for a vape in indirect inhaling (MTL), or in restrictive direct inhaling (RDL).

Made of the GTX One Pro mod and the Xtank T clearomizer, this kit features a 3,000mAh built-in battery rechargeable by USB-C.

Its 3ml tank has a top filling system so you can easily recharge it.

Vaporesso specially designs the XTank T to accommodate GTX coils, renowned for their faithful reproduction of flavors.

Vaporesso's GTX One Pro kit

A sober design for an efficient kit

Measuring 137.2 x 30 x 23.2 mm and weighing 140 g, the GTX One Pro is a compact e-cigarette with the standard look of most kits on the market.

The XTank T clearomizer simply screws onto the standard 510 connector of the GTX One Pro mod.

The latter features a sleek handle-shaped design with a non-slip PU leather or silicone coating, depending on the model selected.

The main side of the mod presents from top to bottom:

• The Power mode
• The 0.87" screen
• The ON/OFF switch
• The two setting buttons
• The USB-C port

Handling of Vaporesso's GTX One Pro kit

How does the GTX One Pro work?

Vaporesso enables you to customize your vape experience through several functioning modes.

To access the menu, push three times on the Power button, then use the screen and the settings buttons to select:

• PULSE mode: delivers a steady voltage as soon as you inhale for optimized flavors
• ECO mode: allows you to manually adjust the power up to 40W, with a longer vaping time than in Pulse mode
• SMART ON/OFF mode: activate this mode if you want the chipset to automatically adjust the power according to the type of coil used in the clearomizer
• LOCK mode: lock or unlock the selected power to prevent accidental adjustment
• PUFF mode: puff counter

Please note that the kit has an ON/OFF switch allowing you to easily lock and unlock the mod's switches.

The screen of Vaporesso's GTX One Pro kit

A 3,000mAh capacity

For its GTX One Pro, Vaporesso has opted for a built-in 3000mAh battery, giving it a good capacity.

The mod's screen gives you real-time access to the kit's charge level, via a percentage indicator.

When the time comes, use the included USB-C cable and plug it into the port located below the adjustment switches.

The USB-C port of Vaporesso's GTX One Pro kit

The XTank T clearomizer

Designed for a rather tight draw that optimizes flavors, the XTank T is compatible with Vaporesso GTX coils.

This clearomizer features a straight Pyrex tank with a 3ml capacity.

With its 510 drip tip, it is intended for a rather tight vape with indirect inhaling (MTL) or even restrictive direct inhaling (RDL).

The XTank T clearomizer of Vaporesso's GTX One Pro kit

Two GTX coils included

The GTX One Pro kit comes with two coils, 0.6ohm and 1.2ohm.

Select the one that suits you best depending on the type of draw you want:

• GTX 0.6ohm Mesh coil (pre-installed): use between 20 and 26 watts for a slightly airy vape in MTL (indirect inhaling) or RDL (restrictive direct inhale)
• 1.2ohm Mesh coil: use between 8 and 12 watts for a tight draw in indirect MTL inhaling

When it's time to change the old coil in your clearomizer, after two to three weeks of use, simply:

1. Remove the lower part of the XTank T by unscrewing it
2. Remove the old coil
3. Soak a new coil with a few drops of e-liquid
4. Insert it into its housing in place of the old one
5. Screw the bottom part of the clearomizer back on
6. Fill the tank with e-liquid

Important: wait a few minutes before vaping to allow the new coil to prime properly.

A top airflow setting

The XTank T features a top airflow system, which means that air is drawn in through the top of the clearomizer.

Simply turn the ring on the top cap to open or close the airflow holes. This allows you to easily switch between a very tight draw and a less restrictive vape, depending on your needs!

The airflow of the XTank T clearomizer of Vaporesso's GTX One Pro kit

How to fill your tank?

Follow the steps below to charge your 3ml tank with e-liquid:

1. Unscrew the top part (top cap) of the clearomizer
2. Insert the dropper into one of the two filling holes
3. Pour the e-liquid (be careful not to spill any into the central hole)
4. Screw the top cap back on

Is your coil new? Wait 5 to 10 minutes before vaping to allow it to prime properly with e-liquid.

Box contents

• 1 3,000mAh GTX One Pro mod
• 1 3ml XTank T clearomizer
• 1 GTX 0.6ohm mesh coil (pre-installed)
• 1 1.2ohm Mesh coil
• 1 spare tank
• 1 spare drip tip
• 1 set of spare pieces
• 1 USB-C cable
• 1 user guide

The GTX One Pro kit is made by Vaporesso.

Box contents of Vaporesso's GTX One Pro kit