LiMAX Kit Innokin

Beginners and vapers seeking simplicity, discover the LiMAX 60W kit by Innokin.

Expert in creating devices designed for beginners, Innokin used all its skills to simplify the use of this electronic cigarette. First, by fitting its mod with a built-in battery (60W, 3,000mAh, Wattage simple mode). Second, by combining it with THE ultimate easy-to-use clearomizer (Zenith II 26mm, 5.5ml).

The result is a perfect kit, to take with you everywhere, for a vape always suits your needs and wants, whether you like a tight or airy draw.

The perfect kit for beginners: simple, elegant, effective

The LiMAX kit is composed of a mod with a built-in battery and a polyvalent clearomizer. The whole is harmonious and, above all, very easy to use. It will delight every vaper, especially beginners!

From its size to its design, by way of its handling and ease of use, every feature is here. Enough to tempt vapers looking for simplicity while still wishing to keep a rather restrictive or tight vape, be it in restricted direct (RDL) or indirect (MTL).

The LiMAX kit by Innokin

The LiMAX mod and its built-in battery

Firstly, the LiMAX kit by Innokin is a high-quality, simple, and reliable mod.

The LiMAX mod is made of a zinc alloy, 79.2mm long, 26.5mm wide, and 39.7mm deep. On top of being ergonomic, handling it is pleasant and easy.

Its electronic chipset enables a safe vape and a power of up to 60 watts. But first and foremost, it offers a single vape mode, in variable wattage. Its built-in battery will provide you with 3,000mAh and a USB-C fast charge system.

A single vape mode is especially suitable for beginners!

If there’s one thing Innokin can be applauded for, it’s the wonderful simplification of its electronic mod. The LiMAX offers a single vape mode, called Wattage, thanks to which you can adjust the watts.

Using both adjustment buttons under the screen, you’ll be able to vary the power between 6 and 60W.

The essential information is displayed on this same screen (battery level, wattage, voltage, ohmage). On top of that, Innokin fitted its mod with quite a few electronic safeties!

The screen of the LiMAX mod by Innokin

A long-lasting built-in battery with a fast charge system

The LiMAX mod offers a perfect system for beginners: a built-in battery. With a 3,000mAh capacity, it is enduring enough to last at least a full day!

To charge it (when the indicator on your screen flickers), plug the provided USB-C cable in the USB-C port below the buttons. Then, link the whole to an external power source and wait for it to be fully charged!

The USB-C port of the LiMAX mod by Innokin

The Zenith 2 clearomizer

To create a harmonious combination with its beautiful electronic mod, the manufacturer opted for one of its best clearomizers: the Zenith 2.

This clearomizer, optimized both in terms of design and operation, is perfect for the LiMAX mod: 26mm wide, it seems specially designed for the electronic mod, its 5.5ml tank offers a great e-liquid capacity, and the Z-Coils and air intakes enable both tight and airier draw. Indirect inhaling (MTL) or restricted direct (RDL), the choice is yours!

The Zenith 2 clearomizer of the LiMAX kit by Innokin

A nice range of sensations thanks to the Z-Coils

The Zenith II is compatible with a large coil range for customizable vape: the Z-Coils, offer great flavors, be it with tight, or airier sensations, your choice!

Two are included in the box:

1. One 0.8ohm Z-Coil, pre-installed in your clearomizer. Indirect inhaling (MTL) oriented, to use between 15 and 18 watts. Ideal for e-liquids with high levels of nicotine, nicotine salts, or CBD! However, please favor e-liquids with a high propylene glycol ratio (at least 50% of PG).
2. One 0.3ohm Z-Coil, included in your box. Restricted direct inhaling (RDL) oriented, to use between 30 and 40 watts. Perfect to produce more vapor. Favor e-liquids with a high vegetable glycerin level (at least 50% of VG).

When and how to change your coil?

When: approximately every 2 to 3 weeks, depending on the e-liquids you’re using. When you feel an unpleasant burnt taste, or if your device doesn’t produce any vapor anymore.

How: unscrew the clearomizer from the base of the LiMAX mod. Turn it over and unscrew the lower part (with the 510 connector pin). Pull on the used coil and throw it away. Soak a new coil with a few drops of e-liquid to prime it, then place it in the provided slot. Close the clearomizer.

Dual advantage air intakes: tight or airy draw!

The lower part of the Zenith 2 clearomizer is fitted with a clever airflow system. An easily manipulable airflow ring allows it to switch from a 5-hole combination to a layout with a single large hole.

While the first combination offers a tight draw, MTL-oriented, the second one provides an airier draw, RDL-oriented.

The air intakes of the Zenith 2 clearomizer, LiMAX kit by Innokin

A top fill system offering a great 5.5ml capacity

The great advantage of this clearomizer is its capacity, provided by the 5.5ml straight Pyrex it is fitted with. On top of that, if you ever break or chip it, the LiMAX kit includes a second, identical Pyrex!

Twisting the top cap will give you access to a large hole, helping you with the ‘lock’ engraved symbols. Then, insert the bottle tip in the hole, fill the tank, and close the top cap.

Advice: close the air intakes before filling the tank to prevent any leaks, and turn the clearomizer over before opening them again (to avoid creating air bubbles). Never fill the tank to the brim, never pour anything in the middle hole and, most of all, wait for around 10 minutes before vaping to make sure the coil is properly primed.

The top fill system of the Zenith 2 clearomizer, LiMAX kit by Innokin

Contents of the box of the LiMAX kit

• One built-in battery LiMAX mod
• One Zenith 2 clearomizer
• One 0.8ohm Z-Coil (pre-installed)
• One 0.3ohm Z-Coil
• One spare 5.5ml Pyrex
• One spare 510 drip tip
• One set of spare joints
• One USB-C cable
• One user guide

The LiMAX kit is manufactured by Innokin.

Contents of the box of the LiMAX kit by Innokin