Dotmod DotPod Nano Podmod
A 2ml beginner podmod and 800mAh built-in battery!
-
Maximum power18w
-
Volume2ml
-
Battery typeBuilt-in battery
-
Brand
Discover Dotmod’s DotPod Nano, an electronic cigarette that can be carried around and used anywhere!
Make the most of its miniature size, vintage aesthetic of zinc alloy and leather materials, long-lasting built-in battery, and, most of all, its easy use!
The DotPod Nano doesn't need a screen, button, or vaping modes to satisfy you. It automatically adjusts itself to the 2ml cartridge you’re using, whether it’s the 1ohm or 0.8ohm version!
The design of DotPod Nano
The DotPod Nano is a small and compact pod with a zinc alloy and leather look.
You won't even feel it in your pocket, as it only measures 67.9mm wide and 15mm deep! It’ll fit in your jeans or your bag with ease!
Handling Dotmod’s DotPod Nano
Moreover, the podmod comes with a lanyard that can be attached to the dedicated slot on top of the device!
The lanyard slot on Dotmod’s DotPod Nano
How does the DotPod Nano work?
Podmods have proven very popular among beginners. Indeed, in addition to being compact, easy to handle, and carry, they are extremely easy to use.
Therefore, the DotPod Nano pod is made for vapers who are discovering the world of vaping!
It is powered by an 800mAh built-in battery that will keep you going for a while, and its fully automatic operation will simplify the vaping procedure. It uses disposable cartridges, each with a magnetized connector that slots into the dedicated slot on top of the podmod!
The magnetized connector of Dotmod’s DotPod Nano
A fully automatic device
Dotmod’s DotPod Nano is designed to make your life easier. It is fully automatic and secure, which means that it determines the power to send to the cartridge on its own, depending on which one you’ve installed. You don’t have to adjust anything!
You don't even need a firing button! The DotPod Nano automatically triggers the vaping process when you inhale. In other words, just suck on the cartridge’s mouthpiece to start your vaping session.
An LED indicator that tells you when to charge
The DotPod Nano will keep you vaping for a good while, thanks to its 800mAh built-in battery. But, like any battery, it will eventually run out of energy. So, Dotmod has placed an LED indicator and a USB-C port beneath the podmod.
- If the LED is green, the battery level is at its highest, between 61 and 100%. You can peacefully continue vaping!
- If the LED is blue, the battery level is between 21 and 60%
- If the LED is red, the battery level is at its lowest, between 1 and 20%. Charge your electronic cigarette!
Dotmod includes a USB-C cable in the kit for charging the DotPod Nano. Simply connect it to the USB-C port and any external power source.
The USB-C port of Dotmod’s DotPod Nano
Two 2ml cartridges with 0.8 or 1 ohm coils
The two cartridges compatible with the DotPod Nano are disposable. They already have a sealed coil inside their tank. This coil cannot be changed.
These cartridges are easy to place and fill. They can hold up to 2ml of e-liquid. They’re compatible with any type of e-liquid and are built for a tight indirect inhale (MTL), which is great if you’re just starting out!
The 2ml disposable cartridges of Dotmod’s DotPod Nano
The DotPod Nano coils
If Dotmod’s DotPod Nano only accepts the DotPod Nano 2ml disposable cartridges, it's to keep things easy. Inside these tanks, you will find a ready-made coil, which cannot be removed or replaced.
Two types of cartridges are included, offering two types of vaping:
- The DotPod Nano 2ml cartridge with a 1Ω coil (pre-installed). The podmod will automatically set the power to 14 watts. You’ll get a throatfeel, and the cartridge is suitable for any type of e-liquid, even those with high nicotine levels, nicotine salts, or CBD.
- The DotPod Nano 2ml cartridge with a 0.8Ω coil. The podmod will automatically set the power to 16 watts. The throatfeel will be a little less tight, but still with an indirect inhale (MTL).
Every 2 to 3 weeks or so, when the coil is worn out (unpleasant taste, less vapor than usual), throw away the entire cartridge and put another one on in its place.
The airflow of DotPod Nano
With Dotmod’s DotPod Nano, simplicity is key. The air intakes are already set, so you can enjoy an airflow without having to configure anything!
Designed for a tight indirect inhale vape (MTL), the airflow produces a small but enjoyable amount of vapor that feels just like a traditional cigarette.
The air intake of Dotmod’s DotPod Nano
How to fill the cartridge?
The cartridges can all hold 2ml of e-liquid. They are made from PCTG, which is a robust material.
To fill these tanks, simply do the following:
- Pull the cartridge out
- Lift the red tab on the side of the cartridge
- Tilt the cartridge slightly backwards to avoid any e-liquid overflow
- Insert the tip of your bottle of e-liquid into the hole and fill (but never to the brim)
- Close the tab and put the cartridge back in its place
- Wait 5 to 10 minutes before vaping
The side-fill system of Dotmod’s DotPod Nano
Contents
- The DotPod Nano built-in battery of 800mAh
- One pre-installed 2ml DotPod Nano cartridge with a 1Ω coil
- One 2ml DotPod Nano cartridge with a 0.8Ω coil
- A lanyard
- A USB-C cable
- A user guide
The DotPod Nano podmod is manufactured by Dotmod.
The contents of Dotmod’s DotPod Nano kit
Maximum power | 18w |
---|---|
Volume | 2ml |
Battery type | Built-in battery |
Height | 67.9mm |
Material | Zinc alloy and faux leather |
Width | 49.5mm |
Depth | 15mm |
Mod type | Podmod |
Battery capacity | 800mAh |
Mod type | Electronic |
USB charging | Yes |
Chipset | Other |
Chipset version | DotMod |
Tank | PCTG |
Fill type | From the side |
Drip-tip | Proprietary |
Connector pin | Proprietary |
Configuration | None |
Expertise level | Beginner |
Inhaling type | Indirect |
Battery | Built-in |