Lost Vape Ursa Nano Podmod

Unboxing and presentation of Lost Vape's Ursa Nano podmod

Really compact, it is specially made to be invisible in your pocket. With a built-in battery of 800mAh and 18w of power, it is the perfect electronic cigarette for people who start vaping and looking for similar sensations to the traditional cigarette. Even more, the rechargeable cartridges require very little manipulation!

Moreover, the coils in 1.0ohm and 0.8ohm are specially made to support the nicotine salt e-liquids! Good thing because this type of nicotine is recommended for people who want to quit smoking.

The design of Ursa Nano podmod

With a height of 100.5mm for a width of 24.1mm, and a thickness of only 14mm, you can take it everywhere discreetly!

Thanks to the zinc alloy, the Ursa Nano pod is extremely sturdy and very lightweight.

Lost Vape's Ursa Nano podmod, "Evil Spirit" version

How does the Ursa Nano podmod work?

To give an experience without headaches to beginner vapers, Lost Vape uses a chipset really simple to use. Simple, but that can adapt to your needs: indeed, the Ursa Nano pod has no fire button. To vape, just draw, and the volume of vapor will automatically to the strength of the draw!

Likewise, you'll have no adjustments to make: whatever the type of cartridge that you choose, it automatically detects the coil and adapts the strength in function.

On top of that, Lost Vape gave it quite a few electronic securities that will enable you to vape without having to vape really carefully. With this little podmod, no risk of short circuits, excessive unloading or even overeating!

A 800mAh built-in battery

With a built-in battery of 800mAh, you're vaping all day without having to worry about charging it.

When the time comes, you just need to connect it to power thanks to a USB-C cable supplied in the kit. With fast recharge technology, it will take no time!

Even though it doesn't need a screen display, it will be possible to know the level of battery at any time thanks to an LED indicator on the bottom of the box:

1. When the LED is red, it means you have run out of battery
2. When it is blue, it is half-charged
3. And when it is green, it is totally charged

The recharging of Lost Vape's Ursa Nano podmod

The cartridge of Ursa Nano podmod

What makes the Pod Ursa Nano so convenient, it is also a system of cartridges with built-in coils. Once your coil is over, no need to struggle with manipulations: throw out your old cartridge, and replace it with a new one!

To that end, nothing is simpler: you'll just need to clip and unclip the cartridge.

The disposable cartridge of 0.8ohm of Lost Vape's Ursa Nano podmod

The sealed coils of the cartridge

To give you an excellent vape experience, Lost Vape has thought of the coils of the Pod Ursa Nano cartridges.

You have the choice between two types of coils:

1. 1.0ohm (not included in the kit) for a vape in direct inhalation
2. And 0.8ohm (1 cartridge included in the kit) for a light vape, but still delicious.

The biggest benefit of these coils is specially made to vape e-liquids with nicotine salts. It will suit people wanting to vape CBD!

Does your coil need to be changed? Nothing more simple! Just unclip the cartridge by pulling the drip-tip (the part that you take to your mouth), then place another cartridge in the same place. Before that, remember to fill the new cartridge and wait 10 minutes for the coil to be primed.

N.B: one cartridge is included in the kit, you'll need to buy more separately for the spare cartridge!

Adjustable airflow for different MTL experiences

Despite the simplicity, the Ursa Nano podmod has an adjustable airflow that will make the draw slightly tighter. To that end, go up and down with the small dial on the side of the podmod.

The adjustable dial of airflow of Lost Vape's Ursa Nano podmod

How to fill the cartridge of Ursa Nano podmod?

With the Pod Ursa Nano cartridges, you can have up to 2ml of liquid for electronic cigarettes.

For this, unclip the cartridge and open the strip situated in front of the capsule (written "open"). Insert the cap in the hole and fill it till the capsule is full, which is easy to fill with the see-through device.

Close the strip and unclip the cartridge from the battery.

The filling of the cartridge of Lost Vape's Ursa Nano podmod

Contents of the box

1. 1 Ursa Nano podmod
2. 1 cable of USB-C type
3. 1 Ursa Nano cartridge of 0.8ohm
4. 1 warranty card
5. An instruction manual

The Ursa Nano podmod is made by Lost Vape.

Box contents of the Ursa Nano podmod by Lost Vape