OXVA Nexlim Podmod

Perfect for beginners, the NeXlim podmod is revealed in this video!

The brand OXVA presents the NeXlim version of the podmod, with a compact format, but still with a great capacity, thanks to a 1,500mAh built-in battery.

Compatible with the 4ml NeXlim cartridges, this electronic cigarette can deliver up to 40W of power.

Equipped with a 0.85" TFT screen, directly access the different setting modes of your equipment.

OXVA's NeXlim podmod

A contemporary design

For its NeXlim podmod, the manufacturer chose a structure in zinc and aluminum alloy in the following dimensions: 122 x 28.5 x 17.5mm.

OXVA also included a 0.85" TFT screen, enabling you to browse through several functionalities.

Good handling and practicality are guaranteed with this podmod.

Handling of OXVA's NeXlim podmod

An adjustable functioning

Your NeXlim podmod offers two functioning modes:

• BOOST mode: corresponds to the highest possible power setting, respecting the operating ranges recommended by the manufacturer
• ECO mode: automatic adjustment of the lowest possible power for your coil

OXVA also lets you the possibility to vary the power of the podmod if needed, from 5W to 40W.

The FIRE button enables to:

• 1 click: Light the screen
• 2 clicks: Choose the mode
• 3 clicks: Power setting up to 40W
• 4 clicks: Change of theme
• 5 clicks: Turn the podmod on or off
• 7 clicks: Reset of puff counter

The screen of OXVA's NeXlim podmod

A great capacity

For the NeXlim podmod in a compact format, OXVA is equipped with a 1,500mAh built-in battery for good capacity.

The level of battery is indicated on the screen of your podmod: easily recharge it by connecting the USB-C cable included in the port dedicated. The latter is located under your e-cigarette.

The USB-C port of OXVA's NeXlim podmod

The Top Fill NeXlim cartridges

OXVA includes two 4ml NeXlim Top Fill cartridges compatible with your NeXlim in your box.

These cartridges have a coil technology called Double Mesh, enabling an optimal flavor rendering and a long lifespan.

In order to meet the needs of all types of vapers, the manufacturer offers two cartridges with sealed coils of different values:

• 1 4ml NeXlim Top Fill Cartridge with 0.6ohm sealed coil: recommended for a semi-airy vape in restrictive direct inhaling (RDL), to use between 20W and 40W
• 1 4ml NeXlim Top Fill Cartridge with 0.8ohm sealed coil: recommended for a tight draw in indirect inhaling (MTL), to use between 12W and 32W

Recommendations: Replace the whole cartridge when the built-in coil causes problems when you vape (burning taste, loss of taste). Signs of wear usually appear after 2 to 3 weeks of use.

The NeXlim Top Fill cartridge of OXVA's NeXlim podmod

An adjustable airflow

Thanks to a sliding trapdoor for adjusting the air intake, the manufacturer OXVA lets you choose the draw sensation.

To do this, simply slide the airflow switch located on one of the sides of the podmod: the more you open it, the airier the draw; the more you obstruct it, the tighter your vape.

The airflow button of OXVA's NeXlim podmod

A simplified filling

Here is some advice to simply fill your podmod:

1. Open the strip on the lateral part of the podmod
2. Slide the bottle tip into the opening, and pour the e-liquid
3. Once the handling is made, carefully close the strip
4. After recharging your new NeXlim cartridge with 4ml of e-liquid, wait for a few minutes before vaping to allow the coil to be correctly primed

The filling of OXVA's NeXlim podmod

Box contents

• 1 1,500mAh NeXlim podmod
• 1 4ml NeXlim Top Fill cartridge with 0.6ohm sealed coil
• 1 4ml NeXlim Top Fill cartridge with 0.8ohm sealed coil
• 1 USB-C cable
• 1 user guide

Box contents of OXVA's NeXlim podmod