Geek Vape Aegis Boost Pro 2 B100 Podmod

Discover an innovative second version of the Aegis Boost Pro pod in our unboxing video!

Enjoy this more modern version of the legendary Aegis Boost Pro B100. Each component and system has been optimized, while the design remains assertive and the mechanisms are as simple and clever as ever. With its IP68 rating, the Aegis Boost Pro 2 pod is resistant to all the troubles of your daily life.

Discover a pod able to deliver up to 100 watts of power, supplied by a single 18650 battery (not included) and offering the famous charge and lock systems of the manufacturer Geek Vape. Let yourself be tempted by its 4.5ml PCTG cartridge fitted with a top airflow system, a top fill system, and is compatible with the P Series coils.

With Geek Vape's Aegis Boost Pro 2 B100 pod, enjoy both an incredible flavor rendering and a massive production of vapor!

Geek Vape's Aegis Boost Pro 2 B100

The classic Geek Vape design

When you look at the Aegis Boost Pro 2 B100 pod, a quick glance is enough to guess who the manufacturer is! Indeed, this pod is adorned with the famous characteristics of Geek Vape: elegance, quality, and sturdiness!

With its IP68 rating, this pod is both water resistant and protected against dust, even the finest particles. Its body made from an alloy of zinc and stainless steel (with a nice touch of leather) and its PCTG cartridge also offer it great resistance to impacts and pleasant handling.

This second version of the famous e-cigarette is even more ergonomic than the first one: 121.2mm long, 31.6mm wide and 43.7mm deep. It is also pretty light, barely 142 grams!

Handling Geek Vape's Aegis Boost Pro 2 B100 pod

The magnetic connector of the Aegis Boost Pro 2 pod

This kit-pod mod hybrid was inspired by the Aegis mods for the design. Yet, it is fitted with a magnetic base, perfect for simply and quickly connecting the compatible cartridge!

Both the pod and the cartridge are equipped with magnets, enabling to naturally clip the latter on the first.

The magnetic connector of Geek Vape's Aegis Boost Pro 2 B100 pod

An electronic operation of up to 100 watts

Managed by one of the most effective chipsets ever (the AS Chip 3.0), not only is the Aegis Boost Pro 2 B100 pod able to deliver up to 100W of power with all the essential electronic protections, but it also offers a large array of modes and functions:

• SMART: a clever mode that automatically adjusts the power to the value of the installed coil
• POWER: a standard Variable Wattage mode to manually adjust the power in watts, from 5 to 100W
• BOOSTING: a 'boost' mode, ideal for power vaping!
• TC (Ni/Ti/SS): the temperature control mode compatible with Nickel, Titanium and Stainless Steel wires
• TCR: a more advanced version of the TC mode; manually enter the heating coefficient
• VPC: the Curve mode that allows you to precisely adjust the puff sensations according to curves to set up

To access the mode menu, use the power button, the '+' and '-' buttons, and the beautiful 0.96" display on the front of the kit.

The 0.96" display of Geek Vape's Aegis Boost Pro 2 B100 (SMART mode displayed)

Like all modern Aegis kits, the Boost Pro 2 B100 pod displays the famous A-Lock button from Geek Vape.

Located on the side of the pod mod, this clever button can easily be pushed or pulled to lock or unlock your vape.

The A-Lock button of Geek Vape's Aegis Boost Pro 2 B100 pod

The single-18650 battery slot

If you're a regular user of Geek Vape's products, you already know what to expect!

Powered by a single 18650 battery (not included), the Aegis Boost Pro 2 B100 is equipped with the regular installation system. Under the pod, you'll find the famous stainless steel cap with a retractable handle. Use the latter to unscrew the cap, then slide your battery into the pod, positive terminal first, and screw the cap back.

The single-18650 battery slot of Geek Vape's Aegis Boost Pro 2 B100 pod

A USB-C charge system

Geek Vape knows that all vapers need a second charge system in case of mishap! That's why the Aegis Boost Pro 2 pod is fitted with a USB-C connector and is delivered with a USB-C cable.

The port is located on the front face of the kit right below the display and the '+' and '-' buttons.

A generous, sturdy cartridge

The base of your pod is designed to accommodate any Aegis Boost Pro 2 cartridge. Consisting in a single block, this cartridge offers numerous assets, including a sturdy 4.5ml tank, a sliding tab to adjust the draw, and a top fill system (filling through the top).

Note that the drip tip is fixed to the cartridge and cannot be replaced.

Designed to provide you with a massive volume of vapor, this cartridge is compatible with the whole P Series coil range. Appreciated for their great effectiveness, these sub-ohm coils offer you vaping sessions in restricted direct (RDL) or direct inhaling (DL).

Geek Vape's 4.5ml Aegis Boost Pro 2 B100 cartridge

The P Series coils

The cartridge included in the box of your pod is compatible with a specific coil range: the P Series coils.

Two coils are provided with the Aegis Boost Pro 2 B100 pod

• One 0.15ohm P Series Mesh coil made from KA1, to be used between 70 and 85 watts
• One 0.4ohm P Series Mesh coil made from KA1, to be used between 50 and 60 watts

You'll need to replace your coil once it's used (generally every two to three weeks):

1. Remove the cartridge from the magnetic base of the pod
2. Turn it upside down
3. Pull the used coil and throw it in a suitable container
4. Take a new coil and prime it by soaking it with a few drops of e-liquid
5. Use the provided indicators to insert it into the provided slot
6. Clip back the cartridge on the magnetic base of the pod

The top airflow

Rather than offering you pre-set air intakes, Geek Vape decided to leave the choice up to you: it fitted the Aegis Boost Pro 2 with a clever sliding tab that you can find on the back of the cartridge.

This top airflow system prevents e-liquid leaks and allows you to easily and precisely adjust the draw to enjoy the exact sensations you want!

The sliding tab of Geek Vape's Aegis Boost Pro 2 B100 pod

A 4.5ml tank with a top-fill system

Thanks to its 4.5ml tank made from PCTG, the cartridge of the Aegis Boost Pro 2 pod offers you a great capacity of e-liquid.

To help you fill the tank cleanly and quickly, the cartridge is fitted with a top-fill system protected by a clever rubber cap next to the drip tip.

Proceed as follows:

1. Lift the rubber cap
2. Insert the tip of your e-liquid bottle into the provided hole
3. Fill the tank (never to the brim)
4. Close the rubber cap
5. Wait for 5-10 minutes to make sure your coil is primed

The top-fill system of Geek Vape's Aegis Boost Pro 2 B100 pod

Contents of the box of the Aegis Boost Pro 2 B100 pod

• One Aegis Boost Pro 2 B100 pod
• One 4.5ml Aegis Boost Pro 2 cartridge
• One 0.15Ω P Series coil (pre-installed)
• One 0.4Ω P Series coil
• One coil tool
• One USB-C cable
• One user guide

The Aegis Boost Pro 2 B100 pod is manufactured by Geek Vape.

Contents of the box of the Aegis Boost Pro 2 B100 pod