Vaporesso Vibe SE Podmod

The Vaporesso brand is back with its Vibe SE Podmod, a device that is as easy to use as it is intuitive.

With a 1,100mAh built-in battery, two modes give you a power range of 14W-24W.

Compatible with the Vibe Pod cartridge, your e-cigarette lets you easily switch from an MTL draw to an RDL vape, depending on your daily use.

Combine simplicity and practicality with the Vibe SE podmod!

Vaporesso's Vibe SE podmod

The design of the Vibe SE podmod

Made by the brand with 115.9X26.6X17.6mm dimensions, the polycarbonate structure of this e-cigarette, of only 69g, gives it an optimized handling.

On the front side of your device, find an LED indicator that informs you in real time of its battery level thanks to different colors.

Handling of Vaporesso's Vibe SE podmod

The magnetic connection

Need to change flavors? Simply and quickly alternate the cartridge thanks to the magnetic base system.

The magnetic base of Vaporesso's Vibe SE podmod

A functioning thought for beginners

With its Vibe SE, Vaporesso is aimed at both beginners and experienced vapers looking for intuitive, portable equipment.

One of the advantages of this podmod is its automatic power adjustment: Vaporesso still lets you choose the type of vape you want, with two available operating modes:

• ECO mode: designed to preserve maximum battery life, this mode is particularly suitable for indirect inhaling (MTL) draws, i.e., at 0.8ohm with a power output of 14W
• POWER mode: adjusted for a slightly airier vape (RDL), this mode allows you to vape at 0.6ohm up to 24W of power

To select one of the two modes, push the switch up to the corresponding mode.

Please note that your device has safety features (overheating, low voltage, and overload detection) for a worry-free vape.

The button of Vaporesso's Vibe SE podmod

The built-in battery of the Vibe SE podmod

The manufacturer gives its built-in battery with a capacity of 1,100mAh.

Need to recharge the Vibe SE podmod? Use a USB-C cable (not included) and connect it to the port located on the side.

The USB-C port of Vaporesso's Vibe SE podmod

The Vibe Pod cartridge

By creating its podmod, Vaporesso makes it compatible with the Vibe cartridge by the same manufacturer.

On top of adding a sealed coil, your cartridge holds up to 4.5ml of e-liquid.

Vaporesso's Vibe cartridge

A sealed coil

Designed especially for first-time vapers, the brand has built the coil directly into the tank.

This 'dual mesh' coil actually has two coil values, allowing you to adjust the draw when inhaling.

The Vibe 4.5ml cartridge has a sealed coil of 0.6ohm-0.8ohm.

No adjustment is necessary for the air intake; its airflow system allows you to get the optimal draw with every puff.

Once worn out, simply dispose of the tank in an appropriate container before changing it for a new one.

The filling of the Vibe Pod cartridge

Here are the recommendations for filling your tank:

1. Take the cartridge out of the magnetic base
2. Open the silicon strip
3. Insert the thin tip of your bottle into the hole
4. Fill the Vibe Pod cartridge
5. Close the strip
6. Replace the cartridge in its original place

Wait for some minutes before using your Vibe SE podmod so the coil is correctly primed, especially as it is a new tank. However, please note that its ingenious dual mesh system allows for faster e-liquid priming than usual.

The filling of Vaporesso's Vibe SE podmod

Box contents

• 1 Vibe SE podmod by Vaporesso
• 1 4.5ml Vibe Pod cartridge with 0.6ohm-0.8ohm sealed coil (pre-installed)
• 1 user guide

The Vibe SE podmod is made by Vaporesso. It is sold without a USB-C cable.