Voopoo Vmate Pro Podmod

With impressive lightness, the Vmate Pro will make the happiness of vapers looking for performing and easy equipment.

With a 3ml cartridge and a sealed coil, this podmod has a nice capacity thanks to its built-in battery of 900mAh. Its OLED screen will give you access to all necessary information for your vape, and the GENE.AI chipset will allow you to adjust the power delivered up to 25W.

Voopoo delivers us its VMate Pro with two VMate V2 cartridges and a sealed coil (0.7ohm and 1.2ohm) focusing the podmod on a rather tight draw in indirect inhaling (MTL) or in restrictive direct inhaling (RDL).

Voopoo's VMate Pro podmod

Fineness and lightness

Benefiting from a conception with chic and refined lines, Voopoo's VMate Pro offers optimal use comfort thanks to a perfect ergonomy and a light weight of 43.5g. Its dimensions of 97x28.5x15.5mm and its compact design makes it a podmod that can easily be slid into a pocket

One of these two sides of the podmod hides a nice 0.69" OLED screen and a setting button allowing access to your electronic cigarette's menu. You'll also find on the main side a sliding button with air intake settings.

Handling of Voopoo's VMate Pro podmod

A magnetic base for an optimal connection

Safely installed in its compartment, the VMate cartridge will be perfectly held thanks to its magnetic connection but will also allow you to take it off easily so you can change it with another one. This tip will allow you to alternate the flavors of e-liquid, and this, all day long.

Voopoo delivers its VMate Pro with two sealed coil cartridges (0.7ohm and 1.2ohm), each one has a 3ml tank. Don't hesitate to get a pack of VMate V2 cartridges to ensure you a nice stock of spare tanks!

The magnetic connection of VMate Pro podmod's cartridge by Voopoo

Automatic activation, adjustable power

With its VMate Pro, Voopoo is meant for vape beginners as well as experts. With a performing GENE.AI chipset, this podmod offers a big use comfort thanks to an entirely automatic functioning.

Start by turning the podmod on by pushing the setting button 5 times, located below the 0.69" OLED screen. Simply draw in the mouthpiece of the cartridge to enjoy a puff both tasty and cloudy.

Voopoo leaves it up to you to adjust the wattage according to the type of sealed coil you're using. To do this, simply click on the switch just above the OLED display, then hold it down until the power display flashes. Press again to set the desired value, from 5 to 25W.

The OLED screen of Voopoo's VMate Pro podmod

A 900mAh built-in battery, rechargeable by USB

And to offer you a nice vape capacity, Voopoo gave a 900mAh built-in battery to its VMate Pro. You'll be informed by its level of charge through the 0.69" OLED screen, located on one side of the podmod.

At the right time to fill your electronic cigarette with energy, you'll connect the USB-C cable included in the box of the dedicated port, located under the podmod.

The USB-C port of Voopoo's VMate Pro podmod

The VMate V2 cartridge

With a sturdy tank in PCTG, the VMate V2 cartridge offers a comfortable 3ml capacity e-liquid. Voopoo delivers its VMate Pro with two sealed coil cartridges, with one pre-installed.

Disposable, the VMate V2 cartridge can be recharged in e-liquid and has to be changed once the sealed coil is used. According to the coil value selected, you'll enjoy a tight draw from an indirect inhaling (MTL) to a restrictive direct inhaling (RDL).

The VMate V2 cartridge of Voopoo's VMate Pro podmod

A sealed coil

Still trying to simplify vaping, Voopoo made the choice to give a sealed coil to your cartridge. This means you don't have to do a thing, because once the cartridge is worn out, it simply has to be discarded and changed for a new one! You'll easily spot the first signs of coil wear when you feel a loss of taste, or even a slight burnt taste (after around two to three weeks of use).

According to the type of sealed coil used, you'll enjoy a different draw type:

• VMate V2 cartridge with a sealed coil of 1.2ohm: ideal for a tight vape in MTL (indirect inhaling), recommended power of 12W
• VMate V2 cartridge with a sealed coil of 0.7ohm: perfect for a more airy draw in RDL (restrictive direct inhaling), recommended power of 18W

A button dedicated to airflow setting

Whether you bet on the built-in coil of 1.2ohm or 0.7ohm, you'll have the possibility to adjust the air intake flow under the cartridge.

For this, simply slide the airflow button located on one of the two sides of your VMate Pro. This tip will allow you to quickly alternate between a tight draw and a more airy vape.

The airflow setting button of Voopoo's VMate Pro podmod

3ml to fill in e-liquid

Did you just receive your VMate Pro and you can't wait to use it with your favorite e-liquid? Follow our suggestions below to easily fill your tank of 3ml:

1. Take the cartridge off the magnetic base
2. Lift the silicon strip located on the side of the tank
3. Insert the tip of your bottle
4. Pour the e-liquid up to three-quarters
5. Carefully close the strip
6. Replace the cartridge on its magnetic base

Warning, remember to wait 5 to 10 minutes for the first filling of a new cartridge so the coil is correctly primed in e-liquid.

The filling of Voopoo's VMate Pro podmod

Contents of the box

• 1 25W VMate Pro podmod
• 1 3ml VMate V2 cartridge with a 1.2ohm sealed coil
• 1 3ml VMate Pro V2 cartridge with a 0.7 sealed coil (pre-installed)
• 1 USB-C recharging cable
• 1 user guide

The VMate Pro podmod is made by Voopoo.

Contents of the box of Voopoo's VMate Pro podmod