Aspire Avata Podmod

Aspire innovates with its Avata podmod! Thought for the vapers looking for a simple-to-use solution, this compact podmod stands out with its e-liquid capacity of 15ml.

Equipped with a 1,100mAh built-in battery and an auto-draw system, this kit offers 3 levels of pre-set power and a system of dual tank cartridge to extend your vape session in RDL.

Aspire's Avata podmod

The Avata podmod's design

With rectangular dimensions of 94.8 x 44.5 x 23mm and a weight of 90g, the Avata podmod stays compact and easily transportable.

Its body is made of aluminum alloy, while its transparent cartridge with double tank allows you to check the e-liquid level at a glance.

Its front panel features a circular screen that displays the remaining battery life and the active mode.

Underneath the podmod, you'll find a USB-C port for fast charging.

Handling Aspire's Avata podmod

The magnetic connection system

The Aspire brand has chosen a magnetic connection that ensures a stable attachment between the cartridge and the pod while allowing it to be easily removed for refilling or replacement.

Thanks to this system, you can quickly switch from one tank to another and enjoy a secure hold every day.

The magnetic connection of Aspire's Avata podmod

How does the Avata podmod work?

Quick and easy to use, this kit offers automated and customizable vaping:

• Automatic draw when inhaling (auto-draw)
• A Fire button located on the side, which can be used to change modes

To turn your podmod on or off, simply press the Fire button 5 times.

In addition, you have 3 preset power settings accessible by quickly pressing the same button 3 times:

• Eco (green LED): an economical draw to extend battery life and coil lifespan
• Nor (blue LED): for a balance between flavor and vapor
• Max (pink LED): maximum power for a denser draw

The screen of Aspire's Avata podmod

A 1,100mAh built-in battery

The Avata podmod is designed to last all day without frequent recharging thanks to its 1,100mAh built-in battery.

The Aspire chipset ensures complete safety: protection against overcharging, overheating, short circuits, and low voltage.

The battery charge level of your podmod is indicated by the circular screen displaying the remaining battery life as a percentage.

Is your battery low? Simply use the USB-C port (located under the pod), insert the cable included in the box, and connect it to a wall outlet, computer, or power bank.

The USB-C port of Aspire's Avata podmod

The Avata cartridge: 15ml of capacity

The strong point of the Avata podmod is its 15ml dual-tank cartridge with a sealed coil.

It consists of two parts:

• 5ml at the bottom feeding directly into the coil
• 10ml at the top serves as a secondary tank

The Avata cartridge of Aspire's Avata podmod

When the lower compartment is empty, simply activate the valve on 'Open' under the cartridge to release the additional 10ml. A clever mechanism that limits leaks and avoids frequent refills.

The filling hole and the second tank's opening of Aspire's Avata podmod

A 0.6ohm sealed coil

The Avata kit comes with a cartridge featuring a sealed 0.6ohm coil.

Already installed: simply fill the tank with your e-liquid, wait a few minutes for it to prime, then reattach the cartridge to the podmod using the magnetic connection before you start vaping.

This 0.6ohm coil provides a semi-airy draw, offering a good compromise between flavor and battery life.

Aspire also specifies its power values according to the selected mode:

• Eco: 14W
• Nor: 16W
• Max: 18W

An adjustable lateral airflow

The Avata Kit also features adjustable side airflow. Using a small slider on the side, you can gradually adjust the airflow.

To make your choice, simply use this airflow button: the more it is open, the more airy the draw (RDL), and conversely, the more you close it, the more closed the draw (MTL).

The airflow of Aspire's Avata podmod

How to fill the cartridge?

Here are the instructions for filling the tank:

1. Remove the cartridge from the podmod
2. Rotate the red latch to 'Open' to open the hatch, allowing the entire cartridge to be filled
3. Under the cartridge, lift the orange silicone tab
4. Insert the tip of your e-liquid bottle into the opening
5. Press to dispense the e-liquid
6. Close the orange silicone tab
7. Rotate the red latch back to 'Close'

If you are filling your cartridge for the first time, you will need to wait a good ten minutes to allow the sealed coil to properly absorb the e-liquid.

The filling of the Avata cartridge of Aspire's Avata podmod

Box contents

• 1 1,100mAh Avata podmod
• 1 15ml Avata cartridge with 0.6ohm pre-installed coil
• 1 USB-C cable
• 1 user guide

The Avata podmod is made by Aspire.

Box contents of Aspire's Avata podmod