OXVA XLIM Go 2 Podmod

An easy-to-use podmod, with a 1,500mAh battery. A&L presents the XLIM Go 2 podmod in this video.

Made for beginners, here is the XLIM Go 2 by OXVA, a light podmod with a simple and performing functioning.

Whether you are new to vaping or simply looking for a portable device, this kit is designed for a tight draw with indirect inhalation (MTL).

Its 1,500mAh built-in battery, with a maximum power of 30W, comes with a disposable 3ml cartridge with a sealed coil.

The XLIM Go 2 comes pre-configured, so no adjustments are necessary. However, you can still use its airflow adjustment system to customize your draw.

OXVA's XLIM Go 2 podmod

The design of XLIM Go 2 podmod

The XLIM Go 2 stands out with its long dimensions of 117.4x26.4x15mm. This kit offers good handling and can quickly slide into all your pockets or bags.

It has a disposable tank with a 3ml e-liquid capacity and a 0.8ohm sealed coil with the UNITECH 2.0 technology for vape sessions in indirect inhaling (MTL).

Handling of OXVA's XLIM Go 2 podmod

A system of magnetic connection

Regarding the connection between the podmod and the cartridge, OXVA offers a magnetic connection, ensuring a reliable and safe anchor.

This tip gives you the possibility to easily alternate the e-liquid flavors by changing the cartridges.

The magnetic connection system between the OXVA's XLIM Top Fill cartridge and XLIM Go 2 podmod

How does the XLIM Go 2 podmod?

Fill, clip, and vape! OXVA makes vaping intuitive thanks to this already set electronic cigarette, with automatic and safe functioning.

The podmod takes care of everything: according to the sealed coil installed, the kit only determines the power value, from 14 to 16 watts.

You only have to draw into the mouthpiece (auto-draw system) of the cartridge to trigger the coil heating, which delivers the puff, for a tight draw in MTL.

A 1,500mAh built-in battery

With the XLIM Go 2 podmod, not only do you benefit from a long capacity with its 1,500mAh built-in battery, but you can also recharge the latter thanks to a USB-C cable (not included).

You'll see the OXVA logo on the main side of the podmod, which is an LED indicator regarding the level of battery left.

To better understand this colored LED system, which indicates:

• Red LED: the battery capacity is low, it is between 0 and 20%
• Blue LED: the capacity left is 20% to 60%
• Green LED: the level of battery left is between 60 and 100%

Is the indicator red? Your XLIM Go 2 podmod needs to be recharged. To do this, you only have to get a USB-C cable, connect it to the dedicated port located on the side of your e-cigarette, then connect it to a USB computer, wall adaptor, or an external battery.

The USB-C port of OXVA's XLIM Go 2 podmod

A XLIM Top Fill 3ml cartridge

To enjoy your podmod upon its receipt, OXVA offers an XLIM Top Fill disposable cartridge, benefiting from the UNITECH 2.0 technology for a longer lifespan and optimal flavor rendering.

The manufacturer OXVA provides a coil with a 0.8ohm value, suited for a vape in tight draw (MTL).

Please note that the XLIM Go 2 podmod also handles the XLIM Top Fill cartridges with the sealed coils with 0.4, 0.6, and 1.2 ohms, so that you can vary your vaping style from a more airy draw (RDL) to a tighter one (MTL).

OXVA's XLIM Top Fill cartridge

A sealed coil inside the tank

The cartridge has a non-removable coil; you cannot replace the latter.

This tip avoids any coil handling for a simple and intuitive use of your e-cigarette. After two to three weeks of use, if the coil shows some signs of wear, like a loss of flavors.

You only have to replace the whole cartridge with a new one, without having to take the coil out.

An adjustable airflow

On one of the sides of your XLIM Go 2 is a discreet and handy button. The latter, sliding from top to bottom, enables widening or narrowing the air intake window, to quickly alternate between a more or less tight draw.

The more the hole is open, the more the air intake is important, and so your airy draw. The more the hole is closed, the lower the air intake and the tighter the draw. 

The airflow of OXVA's XLIM Go 2 podmod

How to fill the cartridge?

Is your cartridge new or empty? To fill it, you only have to:

1. Take the cartridge off the magnetic base by pulling on it
2. Lift the silicone strip located on the side of the tank
3. Tilt the cartridge and then insert the bottle tip into the filling hole
4. Pour your e-liquid
5. Carefully close the strip
6. Replace the cartridge in its magnetic compartment

N.B.: Don't forget to wait for 5 to 10 minutes before vaping if you use a new cartridge, so the coil is correctly primed with e-liquid.

Filling of the cartridge of OXVA's XLIM Go 2 podmod

Box contents

• 1 1,500mAh XLIM Go 2 podmod
• 1 XLIM Top Fill 3ml cartridge with 0.8ohm sealed coil (pre-installed)
• 1 user guide

The XLIM Go 2 podmod is made by the brand OXVA. It is sold without a USB-C cable.

Box contents of OXVA's XLIM Go 2 podmod