Voopoo Drag E60 Podmod

Are you looking for a podmod with a great capacity that will follow you discreetly wherever you go? The Drag E60 podmod is perfect for you!

You thought DL (direct inhaling) or restricted direct inhaling (RDL) vape was reserved for experts? Voopoo offers its E60 podmod, designed both for beginners and experienced vapers who are searching for an easy-to-use daily device.

Its distinctive feature? Being a high-performance device while also being in a compact format. The Drag E60 podmod is fitted with a 2,550mAh built-in battery and a max power of 60 watts.

Therefore, it is especially suitable for beginners, thanks to its USB-C charging port and the quick and safe cartridge connector on the magnetic base.

The Drag E60 podmod by Voopoo

A compact podmod

The Drag E60 podmod feels very comfortable in the hand, thanks to its compact size (9.4 x 4.6 x 2.49 cm) and sleek design.

In terms of style, the Drag E60 combines a leather panel covering part of the device with zinc-aluminum alloy accents.

Your pod also features a luminous screen.

Handling the Drag E60 podmod by Voopoo

A 2,550mAh built-in battery

The Voopoo Drag E60 features a 2,550mAh battery with a maximum power output of 60W, all in a compact, portable design. This model allows you to vape in direct inhaling (DL) or restrictive direct inhaling (RDL) modes, depending on your preference.

The Drag E60 podmos’s built-in battery features a magnetic connection specifically designed to securely and easily attach PnP cartridges.

The magnetic connector of the Drag E60 podmod by Voopoo

Choose your vape mode

Equipped with the Gene TT 2.0 chipset for a power range of 5 to 60 watts, the Drag E60 adapts to your needs. Once you have it in hand, you can explore three operating modes, accessible by opening the menu on the screen after simultaneously pressing the '+' and '-' buttons.

All you have to do is choose your preferred mode from the three available:

• SMART mode: This mode automatically adjusts the power output based on the installed coil; ideal for beginner vapers.
• RBA (Rebuildable Atomizer) mode: This mode allows Drag E60 users to adjust the power output themselves.
• ECO mode: This mode optimizes the podmod’s energy consumption. According to the manufacturer, this smart technology extends the number of remaining puffs by 10%.

The screen of the Drag E60 podmod by Voopoo

Quick charge USB-C port

Thanks to its 2,550mAh built-in battery and 4.5ml tank, the Drag E60 podmod offers extended battery life. Please note that once the battery level drops to 40%, your e-cigarette will prompt you to activate ECO mode to extend battery life until the next charge.

The Drag E60 kit features a USB-C Quick Charge system, allowing you to charge your podmod quickly and easily via the USB port located on the same side as the screen, below the “+” and “-” buttons. The USB-C charging cable is included in the package.

The USB-C port of the Drag E60 podmod by Voopoo

Enjoy a 4.5ml capacity

Voopoo has equipped the Drag E60 kit with its PnP Pod II cartridges, which have a capacity of 4.5ml and measure 24.6mm in diameter and 35.1mm in height. Thanks to its magnetic connection system, changing the podmod is a breeze when the time comes—especially if you want to switch e-liquid flavors throughout the day.

Once used up, you can also easily replace the coil inside the podmod.

Note that the Drag E60 comes with two coils: a 0.20ohm PnP-TW20 and a 0.30ohm PnP-TW30.

The 4.5ml PnP Pod II cartridge of the Drag E60 by Voopoo

Compatibility with all the Voopoo PnP coils

The Drag E60 kit is delivered with two PnP-TW sub-ohm coils, but is also compatible with all the Voopoo PnP coils. The two coils included in the box are designed for sub-ohm vaping.

• One 0.20ohm PnP-TW20 coil to use between 40 and 55 watts, DL (direct inhaling) oriented
• One 0.30ohm PnP-TW30 coil to use between 28 and 36 watts, RDL (restricted direct inhaling) oriented

The coil inside the PnP Pod II can be quickly removed and inserted:

1. Remove the cartridge of your electronic cigarette
2. Pull the used coil to remove it
3. Place a new PnP or PnP-TW coil inside the cartridge and push to fix it
4. Fill the tank with your favorite e-liquid, then wait for 5-10 minutes to make sure the new coil is correctly primed and soaked

Easily adjustable airflow

The Drag E60 kit offers a simplified and effective draw adjustment thanks to the notches on each side of the podmod.

To adjust the airflow to your convenience, simply twist the podmod on its base to open or close both air intakes. You can choose between an airy draw and a slightly tighter vape.

The air intakes of the Drag E60 podmod by Voopoo

Top fill system

Filling your tank is child’s play with the Voopoo PnP II cartridge:

1. Twist the Drag E60 top cap to remove it
2. Insert the bottle top in one of the holes under the silicon cover, then fill the tank up to ¾ (never pour e-liquid in the middle hole)
3. Replace the top cap
4. Wait for 5 to 10 minutes if you’re using a new coil

The top fill system of the Drag E60 podmod by Voopoo

Contents of the box of the Drag E60 podmod

• One Drag E60 podmod
• One 4.5ml PnP Pod II cartridge
• One 0.2ohm PnP-TW20 coil
• One 0.3ohm PnP-TW30 coil
• One USB-C cable
• One user guide

The Drag E60 podmod is manufactured by Voopoo.

Contents of the box of the Drag E60 podmod by Voopoo