Innokin Klypse Podmod

Discover everything you need to know about Innokin's Klypse pod thanks to our A&L expert in this video!

Innokin’s Klypse podmod is perfect for beginners. It is fully automatic and has no buttons or screen. It is compact and easy to carry. And most importantly, it's easy to use!

With its built-in 700mAh battery, USB-C port and disposable cartridges, the Klypse podmod from Innokin offers a tight vape with an indirect inhale (MTL) and even a hygienic cap to protect your e-liquid from any light or dust.

You will love vaping with it!

Innokin’s Klypse podmod

A small and practical pod that’s also beautiful

Innokin’s Klypse podmod is 94 x 29 x 15.2 mm and made from high quality aluminium. Its small size will suit everyone, it takes up minimum space and is very handy and pleasant to use!

Its minimalist and uncluttered design will appeal to many people. It is even available in flashy colours.

How to use Innokin’s Klypse podmod

Connect two pieces and your podmod is set!

The Klypse is what we call a pod mod. It is comprised of a mod, which is a built-in battery of 700mAh, with an automatic operation and a fast USB-C charge, and of a pod, which is a disposable cartridge with a built-in coil.

It is by connecting these two parts thanks to their magnetic bases that you obtain the full electronic cigarette.

Note that the Klypse pod comes with a hygienic cap that protects your e-liquid from sunlight and keeps the mouthpiece clean!

The magnetic connection of Innokin’s Klypse podmod

Fully automatic, you just need to inhale!

Innokin designed an electronic cigarette that’s easy to use, to satisfy newcomers and novice vapers. Therefore, the Klypse podmod is fully automatic!

You don’t have to adjust or configure anything. There’s no button or screen, the podmod is activated when you inhale on the mouthpiece. It then adjusts its power to suit the cartridge you’re using.

To vape with Innokin's Klypse podmod, simply inhale through its mouthpiece

An USB-C port and LED indicator!

Since the Klypse pod has a 700mAh built-in battery, it comes with the traditional USB-C port with a 5V/1A connection. You will find it on the side of your electronic cigarette. And, of course, the Klypse pod comes with a charging cable!

There is one essential point: the remaining battery level. Because you need to have this information to know when to charge your device!

A battery level indicator has been added to the side of the device, next to the manufacturer’s name. When the battery is at more than 10%, the white light remains. But when the battery drops below 10%, the white light flashes 10 times.

The USB-C port of Innokin’s Klypse podmod

An easy-going cartridge

When you lift the cap of Innokin’s Klypse pod, you'll discover its tank, a beautiful 2ml PCTG cartridge with a sealed coil and a lateral access for filling.

The Klypse podmod uses a specially designed disposable cartridge with a pre-installed 0.8 ohm coil that’s perfect for beginners and easy to use.

The disposable cartridge of Innokin’s Klypse podmod

A pre-installed coil

No need to look for the right coils to put in your Klypse cartridge, as the latter comes with a coil already installed in the tank. That's why it’s disposable. Once the coil is worn out (usually after 2 to 3 weeks of use), you throw away the whole cartridge and replace it with a new one!

A preset draw

Innokin’s Klypse podmod offers you a straightforward vaping experience, as the power and the draw are already set for you!

If you look at either side of the podmod, you’ll notice two small holes. These are the air intakes. They don’t need to be adjusted. They have already been finely tuned, machined and placed to deliver the perfect airflow.

The result is a tight draw that’s very close to the one you get with a traditional cigarette.

A 2ml tank that’s filled from the side

The Klypse’s cartridge can hold 2ml of e-liquid and must be filled from the side.

To do so:

1. Remove Klypse’s cap
2. Pull the cartridge out of its slot
3. Lift the silicon tab on the side of the cartridge
4. Tilt the cartridge slightly backwards and insert the tip of your bottle of e-liquid into the hole
5. Fill the tank with e-liquid, but not to the brim!
6. Close the silicone tab and put the cartridge back onto the Klypse’s magnetised connector
7. Wait 5 to 10 minutes and then vape!

Filling Innokin’s Klypse podmod

Contents

• The built-in Klypse battery of 700mAh
• One 2ml Klypse cartridge with a 0.8Ω coil
• One hygienic cap (pre-installed)
• A USB-C cable
• A user guide (in French)

The Klypse podmod is manufactured by Innokin. Its packaging is fully recyclable.

The contents of the box of Innokin’s Klypse podmod