Lost Vape Ursa Nano Pro Podmod

Our expert makes you discover the subtleties of Lost Vape's Ursa Nano pod in this unboxing video!

Lost Vape presents an electronic cigarette that’s made for everyone, the Ursa Nano Pro podmod.

Discover a small and practical kit that’ll easily fit in your pocket and follow you everywhere!

You’ll be able to enjoy a tight indirect inhale (MTL), ideal for e-liquids with high nicotine levels, nicotine salts or CBD, or you can opt for an airier restrictive direct inhale (RDL).

Most importantly, you can use disposable cartridges (with sealed coils inside them) or reusable cartridges (compatible with the UB Mini Coils).

Lost Vape’s Ursa Nano Pro podmod

The podmod that has everything you need!

The Ursa Nano Pro podmod combines small size and convenience, along with versatility and intuitive use.

It measures 94.4mm high, 24mm wide and 14mm deep (not to mention its light weight of almost 50 grams). It’s also entirely made from aluminium alloy, hence the stylish look and the comfortable, high-quality feel!

Handling Lost Vape’s Ursa Nano Pro podmod

A straightforward podmod 

Are you a beginner vaper? Do you need an extra kit? Do you like both tight and airy vapes?

The Ursa Nano Pro podmod meets all these criteria, and more!

It features an effective built-in 900mAh battery, USB-C port, and can produce 25W of power. The Ursa Nano Pro performs equally well in MTL and RDL.

Thanks to its magnetic connector, it’ll accommodate both the Ursa Nano disposable cartridges and the Ursa Nano Pro reusable cartridges (compatible with the UB Mini Coils).

The magnetic connector of Lost Vape’s Ursa Nano Pro podmod

A simple operation

The Ursa Nano Pro podmod has been designed to be as easy to use as possible. But this does not prevent it from having a 0.42 inch OLED screen and a nice firing button, for vaping or setting your power from 9 to 25 watts!

By the way, you won't necessarily need to press this switch to vape. You can simply inhale on the mouthpiece and the device will turn on automatically.

In regards to safety, you won’t have anything to worry about, as the podmod is equipped with the manufacturer's Quest chipset. It’ll protect you from any electronic mishaps and guarantee you a peaceful vaping session!

The screen of Lost Vape’s Ursa Nano Pro podmod

A built-in 900mAh battery and USB-C port

The reason the Ursa Nano Pro podmod keeps working for so long is its built-in 900mAh battery.

As soon as it runs out of power, simply use the USB-C port beneath the podmod to charge it.

Plug the cable included in the kit into the podmod and connect it to any external power source, such as your laptop.

The USB-C port of Lost Vape’s Ursa Nano Pro podmod

Two cartridge options

The Ursa Nano Pro podmod is revolutionary in that it’s compatible with a disposable cartridge (fitted with a sealed coil) and a reusable cartridge (compatible with the UB Mini Coils).

This is all that differentiates these cartridges. Otherwise, they’re made from the same PCTG material, have the same 2.5ml tank and are filled from the side.

The Ursa Nano Pro’s cartridge, made by Lost Vape. Disposable or reusable, it’s up to you!

The Ursa Nano disposable cartridge with 0.6 ohm coil

You do not want to bother yourself with the tedious task of replacing your coil? Then the Ursa Nano disposable cartridge and its sealed coil is made for you!

The 0.6 ohm coil that’s pre-installed in this cartridge allows for a fairly tight vape. Once the coil is worn out, simply throw away the whole cartridge and put a new one in its place.

And this is not the only disposable cartridge compatible with your podmod! All the Ursa Nano cartridges can be fitted onto this beautiful device.

The Ursa Nano Pro reusable cartridge, compatible with the UB Mini Coils

Do you prefer reusable cartridges? Well, the 2.5ml Ursa Nano Pro is made for you!

This cartridge is identical to the previous one and will accommodate any UB Mini Coil. Once the coil has reached the end of its life, usually every two to three weeks, you don't have to throw away the whole cartridge, just replace your old coil!

The UB Mini Coils for your reusable cartridge

The 2.5ml Ursa Nano Pro cartridge needs a UB Mini Coil to function. Lost Vape already includes one in the kit.

This UB Mini S1 Coil (included) has a resistance value of 0.8Ω and should be used between 12 and 17 watts.

To install and replace your UB Mini Coil, you must:

1. Remove the Ursa Nano Pro cartridge from the podmod's magnetised connector
2. Turn it over
3. Use the notches on either side to remove the old coil
4. Grab a new coil and soak it with a few drops of e-liquid
5. Insert it in the dedicated slot
6. Put the Ursa Nano Pro cartridge back onto the podmod's magnetised connector

A fairly tight or an airier draw

Lost Vape’s Ursa Nano Pro podmod is capable of providing a fairly tight ‘loose MTL’ vape with an indirect inhale, or an airier restrictive direct inhale (RDL).

To switch from one draw to the other, you have to adjust the airflow, by sliding the little knob on the side of the podmod. 

The air intakes of Lost Vape’s Ursa Nano Pro podmod

Filled from the side

No matter which cartridge you decide to install on your Ursa Nano Pro podmod, they both have the same 2.5ml tank. The latter is filled from the side, as follows:

1. Remove the cartridge from the podmod's magnetised connector
2. Lift the silicone tab
3. Tilt the cartridge slightly and insert the tip of your bottle of eliquid into the hole
4. Fill with e-liquid (but never to the brim)
5. Close the silicone tab and put the cartridge back onto the podmod’s magnetised connector
6. Wait 5 to 10 minutes before vaping (so that the coil can soak up enough liquid)

The side-fill system of the Ursa Nano Pro cartridges

Contents 

• The Ursa Nano Pro battery
• A pre-installed disposable cartridge with a 0.6Ω coil
• A Ursa Nano Pro reusable cartridge
• One UB Mini S1 0.8Ω coil
• A USB-C cable
• A neck strap
• A user guide

The Ursa Nano Pro podmod is manufactured by Lost Vape.

The contents of Lost Vape’s Ursa Nano Pro podmod kit