Geekvape Digi Q Podmod

In this video, A&L presents a compact, light, and original podmod made by Geekvape: the Digi Q!

The manufacturer Geekvape presents the Digi Q podmod: a compact electronic cigarette with a square format in which you'll find a 1,000mAh built-in battery and an adjustable power up to 25W.

It offers temperature control, power in watts, automatic or manual activation, and a 2ml tank, fillable through the top.

The Digi Q is also meant for vape beginners and experts wishing for a customizable experience, between a tight draw (MTL) and more airy inhaling (RDL).

Geekvape's Digi Q podmod

A compact and square design

Made in aluminum alloy, the Digi Q has a square and light design (71x49x16.8mm for 121g). Its reduced format can be easily slipped into one of your pockets or bags.

This podmod includes a 0.32" OLED screen associated with a system of RVB LED, enabling the user to follow the battery capacity, the power in watts, and temperature.

On the sides of your podmod, you'll find the Fire button on one side and the 3-level adjustable airflow control on the other.

Handling of Geekvape's Digi Q podmod

A system of magnetic connection

Whether you’re replacing a used coil cartridge or simply want to switch easily between different flavors, Geekvape has opted for a magnetic connection system.

All you have to do is gently pull on it to detach the cartridge from the battery.

The magnetic connection of Geekvape's Digi Q podmod

An easily customizable podmod

Your Digi Q podmod is designed for both beginners and experienced vapers. First, getting started is very simple: quickly press the Fire button five times to turn the podmod on or off.

Once it’s on, you have two activation modes for vaping: an automatic draw triggered by inhaling through the mouthpiece (autodraw system) and a manual mode via the main Fire button.

How do you adjust your podmod’s power? Here, you once again have a choice between different modes:

• Temperature control: quickly press the Fire button three times to access the settings mode. When the temperature flashes on the screen, each press increases the value by 1°C
• Power control: Press the Fire button three times quickly. Once in the settings, each press increases the power by 0.5W, up to a maximum of 25W

The screen of Geekvape's Digi Q podmod

A battery rechargeable via USB-C

The Digi Q podmod features a 1,000mAh built-in battery. 

The battery charges via a USB-C cable (not included). To charge it, simply connect the cable to the podmod’s USB-C port, then plug it into an external power source (computer, wall outlet, or power bank).

Not sure how much battery life you have left? Don’t worry.

An RGB indicator light shows you the battery level in real time using a color code:

• Green: remaining battery life between 61% and 100%
• Blue: remaining battery life between 31% and 60%
• Yellow: remaining battery life between 11% and 30%
• Red: remaining battery life between 0% and 10%

The USB-C port of Geekvape's Digi Q podmod

2 Q Series cartridges

Your Digi Q podmod is compatible only with Q Series cartridges from Geekvape. In fact, you’ll receive two cartridges with your kit (0.6 and 1.2 ohms).

Each cartridge features a 2ml tank and a sealed built-in coil. It’s very convenient—you simply replace the entire cartridge when the coil shows signs of wear.

Their top-fill system makes them very easy to use.

The Q Series cartridge of Geekvape's Digi Q podmod

A built-in coil

Along with your pod, Geekvape includes two cartridges with sealed coils of different values:

• 1 sealed coil cartridge (1.2 ohm): designed for a tight draw with indirect inhaling (MTL) vaping; 8–12W or 115–163°C
• 1 pre-installed cartridge with a sealed coil (0.6 ohm): designed for a semi-airy draw (RDL); 18 to 25W or 235 to 307°C

An adjustable airflow

Your Digi Q podmod features a small slider that lets you adjust the airflow.

This system allows you to switch between a more open draw (RDL) and a tighter draw (MTL).

Simply slide the button on the side of your podmod to adjust the airflow to suit your vaping preferences.

The airflow of Geekvape's Digi Q podmod

How to fill the cartridge of your Digi Q podmod?

Your podmod's tank can hold up to 2ml of e-liquid.

It's easy—just follow these simple steps to refill it:

1. Remove the cartridge from its magnetic holder
2. Remove the black cap from the cartridge
3. Insert the tip of your bottle into the small filling hole
4. Pour in your e-liquid
5. Replace the cap

Wait about ten minutes if using a new cartridge, to allow the coil to prime properly.

Filling the cartridge of Geekvape's Digi Q podmod

Box contents

• 1 1,000mAh Geekvape Digi Q podmod
• 1 cartridge with 0.6ohm sealed coil (pre-installed)
• 1 cartridge with 1.2ohm sealed coil

Box contents of Geekvape's Digi Q podmod