Nevoks Feelin X Pod Mod

Unboxing and testing Nevoks’ Feelin X Pod mod

Be free to vape the way you want with the Feelin X podmod and make the most of its amazing capabilities!

Thanks to this superb and handy 40W electronic cigarette, equipped with a built-in 1600mAh battery, you can make everything possible. Choose between an airy DTL vape, a more restrictive RDL inhale, or a very tight MTL. Everything is fully automatic and pre-configured for a hassle-free vaping experience.

The Feelin X podmod is built for one thing, to keep vaping simple. This is why it is suitable for every type of vape!

A modern and well-designed pod mod for everyone

Nevoks’ Feelin X podmod is the latest version of the wonderful Feelin pod.

It’s made from polycarbonate (PC) and ABS. Its body is smooth and comfortable, making it robust and pleasant to use every day. It measures 109mm high, 30.6mm wide, and 20mm deep, so it doesn't take up much room in your bag or pocket. It also weighs just 61.5 grams!

Its modern style will appeal to everyone, in addition to its ease of use, great flavor rendition, and vapor production. Changing the coil is also very straightforward.

Nevoks’ Feelin X pod mod

A straightforward podmod system!

In the vape world, podmods are often easy to use. They are lighter, smaller, and easier to use than standard e-cigarettes. This is the case of the wonderful Feelin X podmod, made by Nevoks!

This kit is made of two important parts, a mod and a pod (also called a cartridge). The two are connected by a magnetic base, with no screws or complicated attachments!

The magnetic connector of Nevoks’ Feelin X pod mod

Always easy to use and has several user modes!

The main objective of the Feelin X podmod is to suit your specific vaping needs, whether you are a beginner or a more experienced vaper.

That's why this electronic cigarette has a chipset that can do a bit of everything, the NX Chip. The latter is capable of providing power of up to 40 watts in complete safety while offering several user modes and options.

• The ‘K’ or ‘Keep Safety’ mode outputs the right power for the specific coil you’re using. You can’t go wrong!
• The RBA mode allows you to select the power that’s sent to the coil, using the adjustment switches, from 5 to 40W.

The screen above these switches displays all the data you could need to know, such as battery level, wattage, coil resistance, etc.

The screen of Nevoks’ Feelin X pod mod

And, the best for last, you can vape manually or automatically, either by using the ‘fire’ switch on the podmod’s front or by inhaling on the cartridge’s TPE mouthpiece!

A nice capacity of 1600mAh and a fast USB-C charge!

Nevoks has opted for a built-in battery for its podmod. That way, the device remains lightweight and easy to carry. That doesn’t mean the battery has a small capacity, though. It’s a 1600mAh battery, which should last a long time!

The Feelin X podmod can only be charged via USB-C, using the port on its main panel. This 5V/2A port is ideal for quickly charging the device, wherever you are! All you need is a USB-C cable (like the one included in the kit) and an external power source.

The USB-C port of Nevoks’ Feelin X pod mod

A generous and simple cartridge, the Feelin X

Nevoks has designed a very special tank for its Feelin X podmod, the Feelin X cartridge. The latter fits onto the battery using a magnetized connector. It is nearly unbreakable, thanks to the PCTG material it’s made from. It can hold 5ml of e-liquid and has a built-in drip tip. There’s a small tab that closes the tank.

Know that Nevoks offers a set of spare cartridges for its Feelin X.

The Feelin X cartridge of Nevoks’ Feelin X pod mod

SPL coils are suited to all types of vaping!

An electronic cigarette needs coils to function. Nevoks decided to equip the pod mod with its famous SPL coils, which were already used in its Feelin pod mod.

Several are available: 1 ohm, 0.6 ohm or 0.3 ohm. And two are already included with your Feelin X kit!

• 0.6Ω SPL coil, to be used from 18 to 25 watts for a restrictive direct inhale (RDL) vape
• 0.3Ω SPL coil, to be used between 30 and 40W for a much more airy, direct inhale (DTL) vape

You will easily install and change your SPL coil (every 2-3 weeks or so, depending on your usage) :

1. Remove the Feelin X cartridge from the magnetic base of the Feelin X pod mod
2. Flip the cartridge over
3. Remove the worn-out coil from the center of the tank by pulling it out
4. Unpack a (new) coil and soak its cotton parts with a few drops of liquid e
5. Place the coil in the center of the tank in place of the old one
6. Proceed to filling

An ingenious system of air intakes, with a sliding switch 

To make the vape even more pleasant and easy on its Feelin X pod mod, Nevoks has thought of a special simple air intake. Built-in on the side of the podmod, a sliding switch will allow you to precisely adjust your airflow, in order to go from purely airy sensations to much tighter ones!

Simply push this switch with your finger: sliding it up will gradually reduce your draw, and sliding it down will increase it. That's all there is to it!

The air intakes of Nevoks' Feelin X pod mod

A solid and generous 5ml PCTG tank to fill easily!

The real asset of the Feelin X cartridge is undoubtedly its tank. In addition to ensuring excellent robustness with its PCTG material, this tank offers a nice capacity of 5ml. Enough to spend a long vaping session without worrying about the e-liquid capacity!

When your coil SPL will not be properly immersed, you must proceed to refill. Otherwise, you risk a nasty dry hit!

1. Remove the cartridge from the magnetized connector of the Feelin X pod mod
2. Lift the silicone tab on the bottom side of the Feelin X
3. Tilt the cartridge slightly to avoid any leakage or spillage of e-liquid
4. Insert the tip of your bottle into the hole provided (under the silicone tab)
5. Fill up

Once the e-liquid charge is complete, wait about ten minutes. Once your coil is properly soaked, you will not encounter any unpleasant surprises when using it!

Filling Nevoks’ Feelin X cartridge

Contents

• The Feelin X pod mod and its 1600mAh built-in battery
• One Feelin X cartridge of 5ml
• One 0.3Ω SPL coil
• One 0.6Ω SPL coil
• A USB-C cable
• A user guide

The Feelin X podmod is manufactured by Nevoks.

The contents of Nevoks’ Feelin X pod mod kit