Vandy Vape BSKR Elite Kit

Get the most delicious vape thanks to this practical tube kit. All you need to know about the BSKR Elite in a video!

Vandy Vape is about to conquer the hearts of tube pod fans with its BSKR Elite kit!

Powered by a single 18650 battery (not included), it is fitted with a 3ml clearomizer that can accommodate all Vandy Vape's VCC Coils, offering indirect (MTL) or restricted direct (RDL) inhaling.

This kit is the perfect ally of beginners, in particular thanks to its interchangeable 510 drip tip and 3 filters included in the box.

Vandy Vape's BSKR Elite kit

The tube, a timeless size

To serve fans of tube kits, Vandy Vape used its indisputable skill to create the BSKR Elite.

Its sleek design makes it an elegant and sober-looking e-cig with ergonomic size: 140mm long and 22mm wide, the whole weighing 230g (without battery).

A 510 adaptor is provided in the kit, allowing you to use the included clearomizer, or any other clearomizer with a max diameter of 22mm.

Handling Vandy Vape's BSKR Elite kit

Connector with 510 adaptor

Your BSKR Elite kit includes a 3ml clearomizer fitted with a bayonet locking system.

You can remove the clearomizer from the tube by pushing it slightly, then twisting it by a quarter turn to unscrew it.

If you want to switch between vape flavors, use the included 510 adaptor. This way, you can use your BSKR Elite with the clearomizer of your choice (22mm max diameter).

The connector of Vandy Vape's BSKR Elite kit

Simple and intuitive operation

If you're a beginner, this e-cigarette is made for you!

Once you insert the 18650 battery (not included) in the BSKR Elite kit, simply switch it on by pressing the power button 5 times. Do the same to switch it off.

This kit is also very easy to use!

No adjustment needed, Vandy Vape ensured everything is already perfectly preset! Press and hold the power button and vape!

The power button of your kit is fitted with an LED system to allow you to check the battery level:

• Green LED: >70% battery level
• Orange LED: 30-70% battery level
• Red LED: <30% battery level

The LED light on the power button of Vandy Vape's BSKR Elite kit

Single 18650 battery operation

Your BSKR Elite kit operates thanks to a single 18650 battery (not included), offering a 3.6V output voltage and providing it with a great capacity. Unscrew the bottom part of the tube to access the battery slot.

Is the LED light red? Move your 18650 battery and charge it using an external charger.

N.B: You can take multiple spare batteries with you to make sure to never run out of battery!

The single-18650 battery slot of Vandy Vape's BSKR Elite kit

USB-C port for emergency charge

Imagine that you forgot your spare batteries, and the battery level of your tube eventually reaches 0. Even that is not a problem thanks to Vandy Vape!

Indeed, your BSKR Elite kit is also fitted with a USB-C port that you can use to charge it, using the cable included in the box!

However, we recommend you to favor using an external charger to preserve the durability of your batteries.

The USB-C port of Vandy Vape's BSKR kit

3ml tank

Vandy Vape's BSKR Elite kit includes a tube mod and a clearomizer fitted with a 0.9ohm coil.

Just insert an 18650 battery and vape!

Your clearomizer, the BSKR Elite, offers multiple advantages:

• Large 3ml capacity with top fill system
• Bayonet locking system, easy to fix on your tube and 100% safe
• Compatibility with all Vandy Vape's VVC Coils

The clearomizer from Vandy Vape's BSKR Elite kit

The tank of your clearomizer is fitted with a 510 drip tip, but not only: Vandy Vape thought of all beginners who are starting a smoking withdrawal.

This way, a pack of 3 SVF-Soft filters, offering sensations similar to traditional cigarettes.

The SVF-Soft drip tip from Vandy Vape's BSKR Elite kit

Compatibility with Vandy Vape's VVC Coils

Two VVC Coils are included in your BSKR kit:

• One 1.2ohm coil, offering tight MTL vape (indirect inhaling)
• One 0.9ohm coil (pre-installed), offering airier draw, still in MTL, or RDL (restricted direct inhaling)

One your coil is used, you need to replace it as follows:

1. Empty your tank and unscrew the clearomizer from the tube
2. Turn the clearomizer over to access
3. Pull the used coil and dispose of it
4. Soak the new coil with a few drops of it liquid then insert it, pushing it slightly
5. Reconnect the clearomizer to the tube
6. Fill your tank through the top, then wait for 5-10 minutes to make sure the coil is primed
7. You're ready to vape!

Airflow ring

You can adjust the airflow of your BSKR Elite kit using its effective airflow ring.

Twist the ring under the clearomizer and open or obstruct the 4 air intakes depending on your desired draw: tight or airier.

The airflow ring of Vandy Vape's BSKR Elite kit

Top fill system

Thanks to a clever top-fill system, you can quickly fill your 3ml tank with e-liquid.

No need to remove your clearomizer to fill the tank! Simply proceed as follows:

1. Unscrew the top cap (the part with the drip tip)
2. Insert the tip of your e-liquid bottle in one of the holes
3. Pour e-liquid in the tank (never to the brim and never in the middle hole!)
4. Replace the top cap
5. Wait for 5-10 minutes if you're using a new coil

The top-fill system of Vandy Vape's BSKR Elite kit

Contents of the box

• One BSKR Elite kit
• One 0.9ohm VVC coil (pre-installed)
• One 1.2ohm VVC coil
• One 510 adaptor
• Three SVF-Soft vape filters
• One USB-C cable
• One set of spare parts
• One user guide

The BSKR Elite kit is manufactured by Vandy Vape.

Contents of the box of Vandy Vape's BSKR Elite kit