Dotmod DotStick Kit

DotMod offers a DotStick kit, which stands out thanks to its tubular shape, its gilding, and flexibility of use!

This small 22mm tube will delight any type of vapers, from beginners to more experienced ones, but also both DL enjoyers and MTL fans!

The clearomizer of the DotStick kit presents a 2ml capacity in e-liquid.

The chipset DotMod conceived includes various functioning modes that will automatically manage the power needed depending on the coil you’re using!

The DotStick works with a 18350 battery (not included), but you can opt for a 18650 format (not included) thanks to the adaptor included.

A sophisticated, quality tube

This small e-cigarette adopts a refined design thanks to its tube shape. This shape confers it some class, but most of all, a very intuitive grip.

Concerned about your security, the American manufacturer doesn’t forget to fit the DotStick with multiple protections in order to avoid any unpleasant short-circuit or dry-hit experience.

The DotStick kit by DotMod

Facilitated use thanks to the 3 powers of vape

With the DotStick, DotMod specially focused on simplicity and practicality by deleting the usual OLED screen and both '+' and '-' button settings.

Moreover, your DotStick will be able to automatically adapt the vape power depending on the coil you’re using. You will still have the possibility to choose your vape mode among the four available options. It is worth mentioning that the automatic adjustment depending on the coil is only available with the Red LED, Blue LED, and Green LED modes.

By clicking three times on the Fire button, you can use the four following modes:

• The Soft or RED LED mode will provide you with 20 watts of power for 0.3 to 0.5 ohm coils and 10 watts for 0.7 to 1 ohm coils.
• The Medium or Blue LED mode, which will slightly increase the vape power, reaching 24 watts for 0.3 to 0.5 ohm coils, 12 watts for 0.7 ohm coils, and 11 watts for 1 ohm coils
• The Strong or Green LED mode, the most powerful mode, that will adapt the power to 27 watts for 0.3 to 0.5 coils, 14 watts for 0.7 ohm coils, and 12 watts for 1 ohm coils
• The Bypass or White LED mode, reserved for experienced vapers since it works as a mechanical mode, meaning the output voltage will be the one of your battery.

The USB port of the DotStick kit by DotMod

The DotStick with adjustable height!

DotMod doesn’t need to integrate a double battery trapdoor to certify a perfect autonomy. You only need a 18350 battery (not included) to make this kit work.

And for vapers who would like a slightly longer device, no worries! DotMod will provide you with an adapter, so you can combine it with a 18650 battery (not included).

To proceed to the change of your 18350 or 18650 battery, you just need to remove the lid under the DotStick, then insert a new one.

DotMod included a USB cable with the kit in order to allow you to charge your podmod. Nonetheless, we advise you to favor the use of a dedicated external charger (not included). This way, you can increase your battery life!

The single-battery compartment of the DotStick kit by DotMod

A high-performance clearomizer, functioning like a Pod cartridge!

DotMod selected a sober clearomizer with stunning details!

Made from PCTG plastic, the DotStick clearomizer can contain 2ml of your blends. With its drip tip 510 and its ring of adjustable air intakes, you can make your own settings to obtain the vape that most fits you!

Because DotMod loves to make you happy, it adds a spare drip tip 510 inside your DotStick kit. With its more elongated curves, it will make you discover a new way to vape!

And DotMod guarantees you a clearomizer compatible with multiple coils. Thus, you will have no trouble finding what you need to supply your clearomizer with!
Very easy to use, this clearomizer has the benefits of a pod cartridge and an astute filling from below!

The DotStick clearomizer of the DotStick kit by DotMod

High-quality coils by DotMod

Inside your kit, you will find two Mesh 316L coils. The first one is 0.4 ohm, and will allow you to vape at 20, 24, or 27 watts depending on the power mode you choose. The second one (1 ohm) is designed for lower power vaping, 10, 11, or 12 watts depending on the selected power mode.

Also, note that coils under 0.25 ohm and over 2.5 ohm can’t work on your DotStick.

To set up your coil, you simply need to push it to the center of the tank. Do not forget to prime it, especially if it’s the first installation, by pouring a few drops of e-liquid on the cotton. Choose your favorite e-liquid, fill the tank, then wait a few moments in order to be sure that your coil is correctly soaked.

With this type of device, we advise you to favor e-liquids with a 50PG/50VG ratio.

The coils of the DotStick clearomizer by DotMod

Adjustable air intakes for a custom vape

Vapers used to DTL and those more accustomed to MTL will be absolutely delighted with the efficiency of this clearomizer!

On top of the various power modes available and the wide choice of compatible coils, you can also adjust the air intakes of your DotStick clearomizer by simply twisting the wheel. Depending on your setting, you will obtain a vape more or less airy.

The air intakes of the DotStick clearomizer by DotMod

A 2ml tank

To perfect its DotStick kit, DotMod chose to incorporate a 2ml clearomizer. Whether you vape with a tight or more airy draw, you will have great e-liquid durability.

Just like a magnetic pod cartridge, you simply need to remove the tank from the air intake base to fill it.

You can fill the tank from below by turning the clearomizer over. We advise you to wait a few minutes before starting to vape, in order for your coil to be fully soaked with e-liquid.

Contents of the DotStick kit

• One DotStick mod
• One 2ml DotStick tank
• One 0.4 ohm DotStick Mesh 316L coil (pre-installed)
• One 1 ohm DotStick Mesh 316L coil
• One spare drip tip 510
• One micro-USB cable
• One set of spare joints
• One user guide

The DotStick kit is manufactured in the United States by DotMod.

Contents of the DotStick kit by DotMod