Dotmod Dotstick 1,650mAh Kit

The American manufacturer Dotmod is once again offering its Dotstick, this time with a built-in battery! The same tubular podmod format is now equipped with a 1,650mAh battery and a 2ml PCTG cartridge, and is as easy to use as ever!

It's simple: all you need to know is the power switch and its LED indicator. The latter will change color depending on the vaping mode selected (Soft, Medium, Strong), but also on the remaining battery level!

For the rest, the operation remains standard, with a precisely adjustable airflow wheel, easy filling from the bottom, and compatibility with all types of Dotstick coils (two already included).

The Dotstick reinvented

For all vapers who prefer built-in battery operation, American modder Dotmod has revamped the look of its Dotstick to offer you an AIO (all-in-one) version.

You'll enjoy the same Dot design by Dotmod, but also a handy, easy-to-carry tube shape.

Finally, if you want to change your cartridge for another clearomizer, the built-in battery in your Dotstick has a 510 connector. This means you can use any other tank with a maximum diameter of 22mm!

Dotmod's DotStick 1,650mAh kit

An LED switch button for simplified functioning

Easier and more handy, your Dotstick AIO does away with the screen and adjustment switches in favor of a simple power switch.

This switch allows you to turn on the heating, of course, but also to change the power mode.

There are three modes:

• Soft mode (red LED) for 12 to 20 watts
• Medium mode (blue LED) for a slightly higher wattage of 14 to 24W
• Strong mode (green LED) for maximum power of 16 to 27 watts

To switch from one mode to another, simply click the switch three times. To turn your e-cigarette on and off, click five times.

The power button with LED indicator of Dotmod's DotStick kit

A 1,650mAh built-in battery and a USB-C port to recharge it

Very easy to use, your Dotstick kit will benefit from long-lasting capacity, without having to change batteries, thanks to its 1,650mAh built-in battery.

And, in addition to allowing you to vape and change your vaping mode, the LED indicator on your switch will also change color depending on the remaining battery level:

• Green LED: battery level between 61 and 100%
• Blue LED: battery level between 21 and 60%
• Red LED: battery level 1 to 20%

So, when your LED indicator turns red, you'll need to quickly charge your Dotstick kit. To do this, you'll find a USB-C port under your tubular electronic cigarette and a dedicated charging cable in your box.

The recharging USB-C port of Dotmod's DotStick kit

An unbreakable cartridge, in PCTG, of 2ml

Screwed onto the 510 connector of your built-in Dotstick battery, you will find a 2ml PCTG cartridge with a gold-plated air intake wheel.

Your cartridge comes with a narrow, beak-shaped 510 drip tip for indirect inhaling (MTL) vaping.

However, you also have the option of adding a second drip tip, included in your box. More open, it is ideal for restrictive direct inhale (RDL) or direct inhale (DTL) vaping.

The 2ml cartridge of Dotmod's DotStick kit

The DotStick coils, at the service of MTL like DL vape!

Like its predecessors, the Dotstick 1650mAh will be compatible with all Dotstick coils from the manufacturer Dotmod.

More specifically, your Dotstick AIO kit will already come with:

• A 0.4Ω Dotstick coil, for a maximum power of 20W in Soft mode, 24W in Medium mode and 27W in Strong mode
• A 0.7Ω Dotstick coil, for a power output between 14 and 20W, adjustable depending on the vaping mode selected

Above all, these coils are equipped with another advantage: an anti-dry hit system that cuts off the kit in the event of poor coil feeding (not enough liquid in the tank).

To install your Dotstick coil (in your empty cartridge):

• Unscrew the cartridge from the built-in battery
• Unscrew the tank part of the air intake wheel
• Flip your cartridge over
• Remove the old coil, or, if necessary, simply insert the new coil, after soaking it with a few drops of e-liquid
• Put everything back together and proceed with filling

A traditional airflow ring for easy and precise adjustment

Located just beneath the PCTG tank of your cartridge, you will see a gold-colored air intake ring.

By simply turning it from right to left, you can adjust your airflow from a tight draw, similar to indirect inhaling (MTL), to a more restrictive draw (RDL) or completely open (DL).

The air intake wheel of Dotmod's DotStick kit

A 2ml capacity, with easy filling from the bottom

The Dotstick cartridge in your Dotstick 1650mAh kit has a 2ml PCTG tank.

To charge your 2ml Dotstick cartridge, proceed as follows:

1. Unscrew the cartridge from the built-in battery
2. Unscrew the tank part from the air intake wheel
3. Flip your cartridge over
4. Insert the tip of your bottle into the hole provided
5. Fill your PCTG tank
6. Put everything back together and wait a good 10 minutes before using your Dotstick AIO kit

The filling system of Dotmod's DotStick kit

Box contents of DotStick 1,650mAh kit

• A 1,650mAh built-in battery
• 1 2ml DotStick cartridge
• 1 0.4ohm coil
• 1 0.7ohm coil
• 1 spare 510 drip tip
• A set of spare seals
• A recharging USB-C cable
• A user guide

The 1,650mAh DotStick kit is made in the United States by Dotmod.

Box contents of Dotmod's DotStick 1,650mAh kit