Lost Vape Centaurus B60 AIO Kit

Lost Vape presents its Centaurus B60 AIO (All-in-One) kit in a Boro format.

Equipped with a maximum power of 60W and a 1,600mAh capacity, this e-cigarette guarantees long vaping sessions.

Available in a Boro format, your device is compatible with the UB AIO cartridge and all UB Ultra coils.

Combining performance and design, the manufacturer offers you a device that is both reliable and handy for everyday use.

Lost Vape's Centaurus B60 AIO kit

A studied design

Lost Vape has designed its Centaurus B60 Kit with a zinc alloy and stainless steel structure.

Its magnetic panels conceal the tank, control switches, and USB-C port.

Measuring 85 x 43 x 25.5 mm, this 165g device also features a 0.42” OLED screen.

The mouthpiece features a pre-installed drip tip in the standard 510 format.

If you wish to change it, make sure you attach the included seals correctly around the drip tip.

Handling of Lost Vape's Centaurus B60 AIO kit

The functioning of Centaurus B60

With its Centaurus B60, Lost Vape is meant for vape experts as well as vape beginners, thanks to its intuitive functioning!

First, press 5 times to turn your device on or off.

Then, press 3 times to access your e-cig menu:

• NORMAL MODE: The QUEST 2.0 chipset automatically adjusts the power output according to the coil value installed in the UB AIO cartridge; please note that you can still increase or decrease the watts, within the maximum power recommended for your coil. Power range between 5W and 60W.
• RBA MODE: Only select this mode when using a Boro RBA tank (not included).

But that's not all! You can also access other features from the menu on the screen.

For example, press the 'FIRE' and '+' buttons simultaneously to lock or unlock your device.

When you press the 'FIRE' and '-' buttons, the puff time display will reappear, and the number of puffs will be reset.

Finally, you can check the battery level of your e-cigarette in real time using a colored indicator light.

The 0.42" OLED screen of Lost Vape's Centaurus B60 AIO kit

The built-in battery

Lost Vape equips your kit with a built-in 1,600mAh battery, allowing for extended and optimal use of your Centaurus B60 AIO.

Once your device runs out of power, remember to plug the included USB-C cable into the port located on the side of the kit.

The USB-C charging port of Lost Vape's Centaurus B60 AOI kit

The UB AIO cartridge of your Centaurus B60

Lost Vape has made its equipment compatible with the UB AIO 5ml cartridge, designed in a Boro format and to accommodate pre-made coils!

Note that the Centaurus B60 AIO from Lost Vape is also compatible with all UB Ultra coils.

Tip: Use the included key to release the tank to be changed; to do this, remove the 510 drip tip to access the unlocking nut.

Lost Vape includes two drip tips to vary your vape experience: the larger one is for a semi-airy vape; the smaller one is for a tight draw.

The 5ml UB AIO cartridge of Lost Vape's Centaurus B60 AIO kit

The UB Ultra coils

The Boro tank of Centaurus B60 is specially made to receive the UB Ultra coils, delivered here in two distinct values:

• 1 0.20ohm UB Ultra coil: to use between 40 and 60 watts, for an airy draw
• 1 0.30ohm UB Ultra coil: to use between 30 and 40 watts, for a more restrictive vape

Easily install the coil in the UB AIO cartridge by following these steps:

1. Take off the magnetic panel of the Centaurus B60
2. Take the 510 drip tip and unscrew the retaining nut with the key
3. Remove the cartridge from its housing
4. Pull on the airflow wheel to remove it
5. Soak a new coil with a few drops of e-liquid and insert it into its housing
6. Put the airflow wheel back in place
7. Fill the tank with e-liquid
8. Put the cartridge back in its place

Recommendation: wait for 5 to 10 minutes before vaping, the time the new coil is correctly primed with e-liquid.

The airflow of the UB AIO cartridge

Lost Vape allows you to adjust the air intake and thus your vape experience using the airflow switch.

To do this, rotate the wheel beneath the tank to adjust the airflow according to the type of draw you want.

The more air you let through, the airier the vape will be; the more you restrict it, the tighter the draw will be.

The airflow wheel of the UB AIO cartridge of Lost Vape's Centaurus B60 AIO kit

The filling of the UB AIO cartridge

The manufacturer designs its equipment to make it easy to refill.

To charge your e-liquid tank, follow these instructions:

1. Remove the magnetic panel covering your tank
2. Lift the silicone tab located on the front of the tank
3. Insert the tip of your bottle into the filling hole
4. Pour in the e-liquid
5. Close the tab
6. Put the magnetic panel back in place

The filling of the tank of Lost Vape's Centaurus B60 AIO kit

Box contents

• 1 Centaurus B60 AIO podmod
• 1 5ml UB AIO cartridge
• 1 0.20ohm UB Ultra coil
• 1 0.30ohm UB Ultra coil
• 2 drip-tips
• 1 bag of accessories
• 1 USB-C cable
• 1 user guide

The Centaurus B60 AIO podmod is made by Lost Vape.

Box contents of Lost Vape's Centaurus B60 AIO kit