BP Mods Light Saber X Kit

Following the success of its short and long tubes with built-in batteries, BP Mods is back with a vengeance, this time powered by a 21700 battery!

Featuring a 5ml cartridge with removable coils, the Light Saber X is a smart-looking electronic cigarette with a discreet OLED screen giving you access to its settings menu (variable wattage, variable voltage, bypass).

This kit will delight vapers looking for capacity and effective performance, with its single 21700 battery (or 18650 when using the adapter included in the kit) delivering a maximum power of 60W.

BP Mods’ Light Saber X kit

A top-of-the-range tube with an elegant look

Those nostalgic for the tube format will love this technological marvel from BP Mods. The little orange BP Mods box contains a magnificent electronic cigarette, impeccably designed.

The Light Saber X retains its unique wooden sleeve and stainless steel frame and measures 24mm in diameter and 140mm tall, which is comfortable to handle.

The top of the podmod features an OLED screen and two switches on the front, as well as a trigger on the back.

At the top of its 5ml cartridge sits a 510 drip tip, available in two different widths. There’s an elongated drip tip for MTL (indirect inhale) and a shorter one for RDL (restrictive direct inhale).

Handling BP Mods’ Light Saber X kit

A handy pod mod format

This powerful electronic cigarette will make vaping easy and enjoyable, thanks to its clever magnetic cartridge.

The Light Saber cartridge is held in place by a couple of magnets, making it easy to unclip and reattach. This clever feature means you can switch e-liquid flavors on the go without any fuss.

Why not buy a couple of spare cartridges, you never know when you might need them!

The magnetic connector of BP Mods’ Light Saber X kit

60W of power and 3 vaping modes

Like its two predecessors, the Light Saber X features a discreet but legible OLED screen on top of it. It gives you access to all your vaping data, including power and voltage readings, as well as the value of the coil you’ve installed.

BP Mods retains its effective and intuitive chipset, which gives you control over three vaping modes:

• POWER, for manually adjusting the power up to 60W
• VOLTAGE, for manually setting the voltage
• BYPASS, which offers a similar experience to using a mechanical mod, but with all the safety features you can expect from an electronic mod

To switch your kit on, simply press its Fire switch 5 times in succession; you'll need to do the same to switch it off. You can access the menu by pressing the same switch 3 times in succession.

Tip: lock your Light Saber X without switching it off by pressing the ‘+’ and ‘-’ switches at the bottom of the screen at the same time.

The OLED screen of BP Mods’ Light Saber X kit

Great vape capacity

The main difference between the Light Saber X and its two big brothers is its power supply. BP Mods has come up with an effective kit with a maximum power output of 60W, powered this time by a simple 21700 battery (not included).

So, not only will you make the most of the great vape capacity, but this system also reduces the risk of running out of battery: just remember to carry a stock of charged batteries!

Slide your 21700 battery into its housing after unscrewing the bottom end of the kit.

N.B.: You can also use an 18650 battery (not included), thanks to the adaptor included in the Light Saber X kit.

The battery compartment of BP Mods’ Light Saber X kit

Are you on the move and have forgotten your spare batteries? No need to panic! Although we'd always recommend using an external charger (not included), you can still charge your battery using the USB-C port on your kit, located just below the Fire switch. Please note that the charging cable is not included with the kit.

The USB-C port of BP Mods’ Light Saber X kit

A beautiful 5ml tank

Based on the clever design of a podmod, the Light Saber X features a cartridge with a magnetic connector, offering a generous 5ml e-liquid capacity. Its transparent PCTG tank gives you real-time access to the level of e-liquid remaining, and its compatibility with a wide range of coils means you can customize your draw to your heart's content!

Included with 3 different TMD coils, you can alternate between a tighter draw with MTL (indirect inhale) and a more airier draw with RDL (restrictive direct inhale), or even DL (direct inhale).

The 5ml Light Saber cartridge of BP Mods’ Light Saber X kit

Wide compatibility of coils

The Light Saber X cartridge has the economic advantage of interchangeable coils. But that's not all! Included with 3 TMD resistors, your kit is also compatible with a wide range of coils, including Voopo PnP resistors (VM, TM, TR), and Vaporesso GTX resistors (0.2ohm and 0.3ohm).

When you receive your kit, you'll fit the cartridge with one of the 3 coils included:

• 1 TMD 1.0ohm coil: for use between 9 and 13W, for a fairly tight draw in MTL (indirect inhale).
• 1 TMD 0.8ohm coil: for use between 12 and 18W, for a slightly airier draw in RDL (restrictive direct inhale)
• 1 TMD 0.3ohm coil: to be used between 30 and 40W, to send big clouds in DTL draw (direct inhale)

An airflow adjustment ring

At the magnetic connector on the cartridge is a clever rotating ring for manual adjustment of the air intakes.

Simply turn this knob to release more or less of the two diametrically opposed air intakes, to easily alternate between a restrictive or more airier draw.

The airflow ring of BP Mods’ Light Saber X kit

5ml e-liquid tank

The Light Saber cartridge offers a generous e-liquid capacity: make the most of the 5ml capacity of its PCTG reservoir, which is easy to refill from the side.

Follow the steps below to refill your tank with e-liquid:

1. Close your airflow
2. Remove the top cap from the cartridge
3. Lift the silicone tab on the side of the tank
4. Insert the tip of your bottle into the filler hole
5. Pour your e-liquid up to three quarters of the way into the tank
6. Close the tab carefully
7. Remember to wait 5 to 10 minutes if you're using a new coil.

Filling the cartridge of BP Mods’ Light Saber X kit

Contents

• 1 Light Saber X pod mod
• 1 Light Saber cartridge of 5ml
• 1 TMD coil of 1.0ohm
• 1 TMD coil of 0.8ohm
• 1 TMD coil of 0.3ohm
• An 18650 adapter
• 2 drip tips
• A set of spare parts
• A user guide

The Light Saber X kit is manufactured by BP Mods. It is sold without a battery or USB-C cable.

The contents of BP Mods’ Light Saber X kit