Dotmod DotAIO V2 Lite Kit

The American manufacturer DotMod presents a DotAIO V2 in a Lite version, lighter thanks to its polycarbonate conception.

With certain characteristics of its elder, this kit is capable of 75W power, a great capacity thanks to its functioning with an 18650 single battery (not included), and good versatility with no less than 4 modes of vaping. All in a compact format.

Only a 510 drip tip is visible, the 2ml tank and its airflow system are inside the DotAIO V2 Lite kit.

It works with DotCoils V2 coils, two are included in the kit's box.

Handling Dotmod's DotAIO Lite kit

A light version

If you think it's got a family resemblance, it's because you know the style of American manufacturer Dotmod!

Made from polycarbonate, the DotAIO V2 Lite kit retains its Billet Box format, with a compact, rectangular structure measuring 79.3mm high, 46.6mm wide, and 21.9mm deep.

Dotmod's DotAIO V2 kit

A complete chipset with LCD screen

Very complete, the DotAIO V2 Lite 75W kit offers as many safety features as vaping modes with:

• Auto mode, which detects the coil installed and adjusts it to the appropriate wattage, with a choice of three intensity levels (Very Soft, Soft, Medium, and Strong)
• PM mode, or Standard Wattage, to set the wattage manually, from 5 to 75W
• TC mode, or Temperature Control, operating with Ni, Ti, and SS wires
• BP mode, or Bypass, for use according to the voltage of your single 18650 battery, as on mechanical mods

On the DotAIO V2 Lite kit, Dotmod has a first-rate interface! A monochrome LCD screen, but above all, with clear, legible indications. On it, you'll find your battery level, power in watts, voltage in volts, coil value, and number of puffs.

To access the menu, just click three times on the switch. To adjust settings, use the traditional '+' and '-' buttons, hidden behind the removable Fire button panel.

The LCD screen of Dotmod's DotAIO V2 Lite kit

Simple 18650 battery capacity

To operate your Billet Mod, you'll need an 18650 battery (not included). Place it inside the kit by simply removing its magnetic panel (on the fire button). A tab as well as '+' and '-' indications will help you to integrate it but also to remove it correctly.

The single 18650 battery compartment of Dotmod's DotAIO V2 Lite kit

In addition to its capacity due to its single 18650 battery operation, the DotAIO V2 Lite kit features a USB Type C port for quick - and occasional - recharging of your electronic cigarette. Use the included charging cable to connect to an external power source!

The USB-C recharging port of Dotmod's DotAIO V2 Lite kit

DotAIO V2 Lite cartridge

Inside your DotAIO V2 Lite is a 2ml cartridge made of robust PCTG material.

Virtually identical to the original (on DotAIO), this tank offers even greater ease of use, with a large filling orifice, a new airflow base, and an optimized magnetic connector system.

Note that your electronic cigarette is also compatible with the DotAIO cartridge for DotAIO V1, SE, and Mini kits. It will not be compatible with DotCoils V2 coils.

The 2ml cartridge of Dotmod's DotAIO V2 Lite kit

DotCoils V2 coils

In terms of coils, the DotAIO V2 Lite kit incorporates the optimized Dotcoils V2 version. Two are already included with your DotAIO V2 Lite:

• DotCoil V2 0.3ohm - already installed in your kit - recommended use between 25 and 40W - direct inhaling (DTL) or direct restrictive (RDL). In Auto mode, 20W (Very Soft), 25W (Soft), 30W (Medium), 35W (Strong)
• DotCoil V2 0.7ohm - recommended setting between 14 and 20W - indirect inhaling (MTL) or restrictive direct inhaling (RDL). In Auto mode, 14W (Very Soft), 16W (Soft), 18W (Medium) or 20W (Strong)

To install your coil, you'll need to remove the cartridge from the heart of your electronic cigarette, and then slide it into the tank. Don't forget to soak your coil with e-liquid. Finally, screw the airflow base onto your coil and you're ready to fill!

The 0.3ohm coil already installed in the 2ml cartridge of the Dotmod's DotAIO V2 Lite kit

An easily adjustable airflow base

On the DotAIO V2 Lite kit, your air intakes will be a separate part, to be screwed onto your DotCoil V2 coil during installation. As a result, your airflow will also be inside your podmod, retaining that Billet Box look.

To adjust your airflow, you'll need to unclip the cartridge's side panel, then turn the air intake knob until you find your preferred draw, from very tight to completely open.

The air intake ring of the 2ml cartridge of Dotmod's DotAIO V2 Lite kit

Small 2ml capacity, easy filling

In your DotAIO V2 Lite cartridge, you'll have room for 2ml of your current e-liquid.

To refill, there's no need to remove the cartridge from the kit. Simply remove the DotAIO V2 Lite's magnetic panel, lift the silicone cover protecting access to the filling port, and insert the tip of your bottle, tilting the kit slightly for ease of use!

The lateral filling of the 2ml cartridge of Dotmod's DotAIO V2 Lite kit

Box contents of DotAIO V2 Lite

• 1 DotAIO V2 Lite
• 1 2ml DotAIO V2 cartridge (pre-installed)
• 1 airflow base for coils
• 1 0.3ohm DotCoil V2 coil (pre-installed)
• 1 0.7ohm DotCoil V2 coil
• 1 USB-C cable
• 1 set of spare pieces
• 1 user guide

The DotAIO V2 V2 Lite kit is made by Dotmod. It is sold without batteries.

Box contents of Dotmod's DotAIO V2 Lite kit