Vaporesso Gen PT80 S Kit

The Gen PT80 S kit by Vaporesso, a pod as refined as practical

Direct inhaling fans, rejoice, the GEN PT80 S pod is here! Fitted with the xTank, a tank especially designed to prevent leaks, this pod makes DTL more comfortable than ever!

The other asset of this beautiful device is the COREX technology of the GTX Coils it is fitted with. This allows this pod to develop the e-liquid flavors at a level never seen before while making them last even longer!

To avoid charging it continuously, this very practical pod operates with a single 18650 battery (not included) that will allow you to vape for hours and hours.

A sleek pod to vape daily, without hassle!

To design this pod, Vaporesso focused on practicality and effectiveness. Its curved body and smooth coating offer great ergonomics, which makes the handling particularly pleasant.

As soon as you handle, it you’ll realize it is made to be easily carried everywhere: very light, it is only 132mm long, 29mm wide, and 30mm deep.

On top of its discreet esthetic, this kit has a very clever design, as its cartridge is fitted with a dual safety to prevent leaks.

A rather small pod full of great qualities!

The Gen Fit PT80 S kit by Vaporesso

A Smart mode to automatically adjust the power of your vape

You don’t want to spend long minutes adjusting your vape every time you want to have a session? Don’t worry, Vaporesso thought of everything and devised the Smart mode, which detects the installed coil and automatically adjusts the power of your new pod.

Do you like to customize your vape? You can do it without hassle thanks to the other vape modes offered by this chipset: Variable Wattage (symbolized by the letters ‘VW’ on your screen) to manually adjust the power in watts, and Variable Voltage (VV) to manually adjust the tension in volts.

You can choose your vape power between 5 and 80W referring to the small 0.91 inch Oled screen on the front of the mode. Use the ‘+’ and ‘-’ buttons above the screen.

The 0.91 inch Oled screen of the Gen Fit PT80 S kit by Vaporesso

A kit operating with a single 18650 battery

Even though vaping is a very effective way to stop smoking, many smokers fear being out of battery at the wrong moment if they switch to vape, thus resuming smoking because they can’t vape.

There’s no risk such a thing could happen with the Gen PT80 S! As it operates with a single 18650 battery (not included), you can vape all day long without needing to charge it. And even if your battery is discharged, simply replace it with a charged one to be able to vape again!

It only takes a few seconds: remove the cover on the back of the mod using your nails and insert the new battery in the provided slot (watch which polarity should be put first).

Even though it is advised to charge the batteries using an external charger (not included) in order to increase their useful life, you can also charge it thanks to the USB-C port on the bottom front part of the box.

The USB-C port of the Gen Fit PT80 S kit by Vaporesso

The xTank, a cartridge offering the benefits of a clearomizer without the downsides!

Are you vaping exclusively in direct inhaling? Then the xTank pod is made for you!

Well designed, it will allow you to get rid of the issues vapers face on a daily basis, and in particular leaks!

Thanks to its easy filling, its airflow system, and its large capacity, the xTank has everything it needs to charm you.

The xTank pod by Vaporesso

The GTX Coils, a range designed for DL

The GTX Coils are definitely one of the strengths of the xTank. Thanks to their Morph Mesh structure, they compensate for the holes that could appear in the cotton, giving you consistent heating. And you’ll taste it by yourself, it greatly enhances the flavors!

Made from cumulus cotton, the structure of this material allows better e-liquid flow. This decreases the coils’ wear and increases their useful life.

On top of that, the GTX range offers a variety of coils to fit each vaper’s needs!

Two coils are included in this kit:

• One 0.15ohm GTX Mesh Coil (60-75W)
• One 0.30ohm GTX Mesh Coil (32-45W)

To replace your coil, simply pull the pod to unclip it from its magnetic base, then pull on the coil to remove it. Insert the new coil, soaked with a few drops of e-liquid beforehand, then put the pod back together. Fill the tank, wait for a few minutes, and off you go for days and days of tasty vape!

A well-designed leakproof airflow

Made for DL, the airflow of the xTank is fitted with a leakproof technology, making it very clean to use.

Indeed, the top airflow is combined with the filling system: make a full twist to the left with the airflow ring to access the hole while totally closing the air intakes. This reduces the risk of leaks due to the pressure difference caused by the filling of the tank.

This airflow is very easy to use: twist to the right for a very airy draw, or to the left to restrict it.

4.5ml capacity and top fill system

As you just saw, the filling is made thanks to a top-fill system. Access it by fully twisting the airflow ring to the left, removing the strip, and filling your tank.

With a capacity of 4.5ml, you won’t have to fill your device very often!

The top fill system of the xTank by Vaporesso

Contents of the box of the Gen PT80 S kit

• One GEN PT80S pod
• One xTank
• One 0.15ohm GTX Mesh Coil (60-75W)
• One 0.30ohm GTX Mesh Coil (32-45W)
• One USB-C cable
• One user guide
• One warranty card

The Gen PT80 S kit is manufactured by Vaporesso.

Contents of the box of the Gen PT80 S kit by Vaporesso