Vaporesso Gen Fit 40 Kit

Vaporesso strikes again with a new version of the Gen Fit, a compact, refined, and practical kit we don’t need to present anymore!

As stated by its name, the Gen Fit 40 has a 40W max power. Its built-in battery has an enhanced battery life compared to its predecessor, 2,000mAh instead of 1,200mAh.

Fitted with the iTank X, this kit allows you to switch from indirect inhaling to direct inhaling thanks to a wide coil range.

With so many qualities, why don’t you let yourself be tempted by the Gen Fit 40 kit?

A fine and sleek kit to take with you everywhere

For this beautiful kit, Vaporesso chose a definitely modern design. With its curves and delicately colored finish, this small kit will follow you everywhere.

When we say this kit is small, we mean it: it’s only 117.9mm long, 32.25mm deep, and 22.3mm wide! A really discreet and tiny kit!

Thanks to its 510 connector, the Gen Fit 40 mod can be combined with any atomizer or clearomizer with a max diameter of 22mm. The iTank 40, a clearomizer that perfectly matches the beautiful colors of the mod, is included in this kit.

The Gen Fit 40 kit by Vaporesso

A very easy-use

In order to make beginners’ lives easier, Vaporesso fitted the Gen Fit 40 mod with a very easy-to-use chipset to allow them to vape without hassle! Thanks to a small screen on top of the box and the buttons on the lower part of the vape, you can adjust the power and switch from one mode to the other.

The Gen Fit 40 offers three vape modes:

Smart VW (or Variable wattage): your mod automatically adjusts the vape power depending on the value of your coil

• VW: allows to manually adjust the vape power (in watts)
• VV (or variable voltage): allows to manually adjust the voltage of the mod
• You can vape up to 40W with this mod, fitted with multiple electronic safeties (overvoltage, undervoltage, dry hits)

Press the Fire button located on the upper part of the mod to vape.

The screen of the Gen Fit 40 mod by Vaporesso

A long-lasting battery

When you stop smoking, you may fear running out of battery at the worst time and then being tempted to smoke again. To prevent this, Vaporesso fitted the Gen Fit 40 with a built-in 2,000mAh battery!

Charging it is easy: you’ll only have to plug the provided USB-C cable into the USB-C port on the lower part of the mod. Thanks to the fast-charge technology, you won’t need to wait for a long time to resume vaping!

Charging the Gen Fit 40 mod by Vaporesso

A polyvalent clearomizer to switch from MTL to DL

If you start vaping to stop smoking, you are surely searching to have the same sensations as those provided by regular cigarettes. In that goal, Vaporesso fitted this kit with the iTank X clearomizer, which allows you to switch from indirect inhaling (MTL, closest to regular cigarettes) to direct inhaling (DL, the vape type that produces the most vapor).

To switch from one to the other, you simply need to choose among the multiple different GTX coils with which the iTank operates!

The iTank clearomizer by Vaporesso

The GTX coils for MTL or RDL

In order to maximize the effectiveness of the iTank, Vaporesso designed it to be compatible with the wonderful GTX coils. Thanks to their design, they have a long-lasting useful life, and provide great flavor rendering while producing a lot of vapor.

Two coils are included in this kit:

• One 0.6ohm GTX Mesh Coil (pre-installed), made for huge vapor production, DL draw, to be used between 20 and 30W
• One 1.2ohm GTX, made for indirect inhaling, to be used between 8 and 12W. This coil will allow you to enjoy e-liquids with high levels of nicotine, nicotine salts, or CBD.

To replace your coil, unscrew the base of the clearomizer, pull on the coil, and insert a new one after soaking it with e-liquid. Close the iTank X and fill it.

After around 10 minutes, the new coil will be perfectly soaked. You can then start vaping!

The 1.2ohm GTX coil of the iTank X clearomizer by Vaporesso

Easily adjustable airflow

As for the airflow of the iTank X, Vaporesso opted for simplicity. Thanks to an airflow ring on the lower part of the clearomizer, you’ll simply need to twist it to the right or to the left to adjust the airflow, switching from a tight draw to an airier one in no time!

The airflow of the iTank clearomizer by Vaporesso

A 3.5ml capacity

A long-lasting battery is good, but it’s useless if the tank is quickly emptied. That’s why the iTank X is fitted with a large 3.5ml bulb tank to allow you to vape for hours without needing to refill it!

And if it ever breaks, no worries: Vaporesso includes a spare 2ml tank in the kit!

To fill your device, unscrew the top cap of the clearomizer, then insert the tip of your bottle in the hole, and off you go!

The top fill system of the iTank Vaporesso

Contents of the box of the Gen Fit 40 kit

• One Gen Fit 40 mod
• One iTank X fitted with a 3.5ml Pyrex
• One 0.6ohm GTX Mesh Coil
• One 1.2ohm GTX Coil
• One 2ml straight Pyrex
• One set of spare joints
• One USB-C cable
• One user guide

The Gen Fit 40 kit is manufactured by Vaporesso.

Contents of the box of the Gen Fit 40 kit by Vaporesso