Vaporesso Gen 200 Kit

With Vaporesso's Gen 200 kit, you won’t have to pretend you’re a cloud chaser, as this wonderful electronic cigarette will make sure you get first place in any power-vaping contest!

You'll love the Gen 200’s 220-watt electronic mod, powered by two 18650 batteries (not included). You’ll also love its flavor rendition, the amount of vapor it produces, and the iTank’s huge tank size. Indeed, the latter is a clearomizer with an 8ml tank and with a 24mm diameter.

Simply put, you won’t get enough of Vaporesso's Gen 200 kit!

A beautiful kit

Vaporesso’s Gen 200 kit will become your new vaping companion.

This electronic cigarette kit combines the raw power of the Gen 200 mod (220 watts with two 18650 batteries) and the generosity of the iTank clearomizer (24mm wide, capable of holding 8ml of e-liquid).

The Gen 200 mod is made from three different materials that make it incredibly robust (rubber, metal, and polycarbonate), whereas the iTank clearomizer is made from stainless steel and Pyrex glass.

These two e-cigarette parts, once combined, promise a powerful and durable vaping experience, along with accurate e-liquid flavors and plenty of vapor!

Vaporesso's Gen 200 kit

The Gen 200 mod: power and finesse

If you already like the Gen range of products from Vaporesso, you’re bound to love the Gen 200!

This beautiful electronic mod has the same iconic silhouette as all the other Gen mods. But, you can see that several technological improvements have been made.

Indeed, instead of having a front-facing screen, it is now located on the device’s side panel, along with the various adjustment buttons and a brand-new USB-C port.

For the rest, the manufacturer has kept the astonishing 220 watts of power, the clever two-18650 battery operation (batteries not included), and the wonderful features…

220W of power, 5 vaping modes, and a redesigned interface!

Vaporesso's Gen 200 kit can reach a maximum power of 220 watts. Moreover, you can select one of the several safe vaping modes, secured by more than 10 electronic protections, and configure them with ease via the new interface!

By browsing through the menus on the 0.96 inch TFT screen, using the four buttons (including the fire switch), you can choose between :

1. F(t) mode - the default user mode that lets you adjust various parameters, such as temperature, speed, and heating time, for a tastier and more balanced vaping experience
2. PUL (pulse) mode, which lets you adjust your puffs more accurately, using a set of power curves that you can set yourself
3. DIY mode, which includes the usual features like Variable Wattage (with Hard, Medium, or Soft settings), Variable Voltage (VV), and Bypass (BP)
4. VWN mode, which stands for Standard Variable Wattage, allows you to manually adjust your wattage

Adding to this, Vaporesso has a specific ‘Setting’ mode for those who want to customize their vape even more, including several options like ‘Default’, ‘Smart VW’, ‘Puff’, or ‘Version’.

The screen of Vaporesso’s Gen 200 kit

Double your battery autonomy!

With Vaporesso's Gen 200 kit, there’s no risk of running out of power in the middle of the day! Indeed, the powerful electronic mod lasts for a good while, thanks to its two 18650 batteries (not included).

Before you start vaping, you’ll have to remove the magnetized panel that covers the mod’s side. Then, insert your two 18650 batteries the right way up, obviously.

The battery compartment of Vaporesso's Gen 200 kit

A speedy charge thanks to the USB-C port!

Beneath the TFT screen and the three adjustment buttons, you’ll notice there’s a USB-C port. Thanks to the latter’s 5V / 2Amp charge, your device will be up and running in no time! Just plug the charging cable included in the kit into the mod and connect it to an external power source.

We do remind you that this type of charging isn’t the best for electronic cigarette batteries. When possible, use a dedicated external battery charger (sold separately), it’ll keep your batteries in working order for longer.

The USB-C port of Vaporesso's Gen 200 kit

The iTank clearomizer, a beast in disguise!

The mod’s manufacturer has also designed the iTank clearomizer, which can be fitted onto the Gen 200 mod thanks to the latter’s 510 connector pin. This sub-ohm tank is built for a smooth and cloudy vape, either with a direct inhale (DTL) or a restrictive direct inhale (RDL).

Its bubble-shaped Pyrex tank can hold 8ml of your favorite e-liquid. It’s filled from above in a flash, its air intakes and its GTi coils are perfect for producing lots of tasty vapor!

The iTank clearomizer of Vaporesso's Gen 200 kit

The GTi coils, built for flavor and direct inhaling

The GTi coils were specifically created for the iTank clearomizer. They’re the perfect balance of vapor and flavor.

There are two of these coils included in the Gen 200 kit:

• one pre-installed 0.2Ω GTi Mesh coil. The recommended wattage for this coil is between 60 and 75 watts, with an optimal wattage of 70W
• one 0.4Ω coil GTi Mesh coil. The recommended wattage for this coil is between 50 and 60 watts

Once your coil is worn out, that is, when you feel a burnt taste, you get less vapor, or when you change e-liquid, you’ll have to replace it:

1. Unscrew the lower part of your iTank clearomizer, namely the part where the air intake is
2. Remove the old coil
3. Insert a new coil in its place, making sure to soak its cotton wicks with a few drops of e-liquid beforehand
4. Screw the clearomizer’s lower part back on

What a lot of vapor!

The vaping giant Vaporesso has added not one, not two, but three air intakes to its iTank clearomizer! Fans of direct inhaling (DTL) will love this, for sure!

Simply rotate the clearomiser’s airflow ring to adjust the draw, which will either increase or lower the amount of vapor your kit will produce.

The air intakes of Vaporesso’s Gen 200 kit

Filling your iTank? An occasional and easy process!

The iTank clearomizer brings a significant advantage to your vaping game, that is, a huge bulb Pyrex tank with an 8ml capacity!

You'll see. Not only is this tank extremely easy to fill, it’ll also keep you going for hours on end, even at full power!

To refill this impressive tank, follow these steps:

1. Slide the top cap outwards, thus revealing the large filling well
2. Insert your bottle’s tip into the well
3. Fill the tank, but never to the brim
4. Slide the top cap back into its place
5. Wait for about ten minutes after each refill, so that the coil can correctly prime itself

Filling Vaporesso's Gen 200 kit

If you prefer a sleeker look for your clearomizer, or if a smaller e-liquid capacity is ample enough, you can equip the iTank with the spare Pyrex tank included in the kit. This tank is perfectly cylindrical and holds 5ml of juice.

The iTank clearomizer with the 5ml straight Pyrex tank

Contents of Vaporesso’s Gen 200 kit

• the Gen 200 mod
• the iTank clearomizer with an 8ml bubble Pyrex tank
• one spare 5ml straight Pyrex tank
• one pre-installed 0.2Ω GTi Mesh coil
• one 0.4Ω GTi Mesh coil
• a set of spare parts
• a USB-C charging cable
• a user guide

The Gen 200 kit is manufactured by Vaporesso.

The contents of Vaporesso's Gen 200 kit