Geek Vape Aegis Eteno E100 Podmod
A modern Aegis podmod of 100W with a single battery and IP68-certified
-
Volume4.5ml
-
Battery type18650 x1
-
Height134.5mm
-
Brand
Our Panda expert tells you everything about Geek Vape's Aegis Eteno E100 podmod in this video!
Make the most of Geek Vape's expertise and treat yourself to the Aegis Eteno E100 podmod.
Discover the Aegis in its most recent iteration. In addition to being simple and practical, it can reach a power of 100 watts and last for quite a while, thanks to its single 18650 battery. Finally, know that it’s IP68-certified.
Discover its different vaping modes and its 4.5ml cartridge, equipped with a top airflow ring and a P Series coil.
Treat yourself to a tailor-made vape, bursting with flavours and big clouds of vapour!
A podmod that’s modern and IP68-certified!
The Aegis Eteno E100 podmod is just as easy to handle and carry as its predecessors. Indeed, it’s lightweight and retains the Geek Vape aesthetic. Its body is made from zinc alloy, stainless steel and silicone. Therefore, it’s solid and comfortable at the same time.
As the Aegis Eteno E100 podmod is IP68 certified, like its siblings, it’s water-proof (even when immersed), shock-proof and dust-proof.
Geek Vape’s Aegis Eteno E100 podmod
The Aegis in podmod form
Geek Vape adopts a modern design that’s proven itself time and time again.
Through its Aegis Eteno E100 podmod, the manufacturer offers a simpler and more convenient vaping experience, without compromising on what makes it special, namely its elegance and toughness!
There isn’t a mod on one side and a clearomizer on the other here. There are two parts that are designed to be assembled in a unique way. This is made possible by its high-quality magnetic connectors!
The magnetic connector of Geek Vape’s Aegis Eteno E100 podmod
Setting up your Aegis Eteno E100, several vaping modes are available!
If the Aegis Eteno E100 decides to adopt a podmod format for greater accessibility, it retains a wide range of vaping modes, suitable for all types of vapers. By repeatedly pressing the firing switch three times in a row, then browsing through the menus using the two small adjustment buttons and 1.06 inch colour TFT screen, you can choose between :
- SMART: Automatically detects the coil you’ve installed
- POWER: Manually set the wattage, from 5 to 100W
- TC (Ni, Ti, SS, TCR): Temperature Control mode, compatible with Nichrome, Titanium and Stainless Steel wires, from 100°C to 315°C (200°F to 600°F). You can also set the heating coefficient.
- VPC: Curve setting for an advanced customisation of each puff
- BOOSTING: Increases the power of the puff
The Aegis Eteno E100 is equipped with Geek Vape’s AS 3.0 chipset, which will manage all the electronic features and protections. The device is thus reliable and will protect you from any mishaps or malfunctions.
The screen of Geek Vape’s Aegis Eteno E100 podmod
Geekvape’s kits are equipped with a clever ‘A-Lock’ system on the side of the device. Slide this switch to lock or unlock your electronic cigarette!
The locking switch of Geek Vape’s Aegis Eteno E100 podmod
Functions with an 18650 battery!
First of all, your Aegis Eteno E100 podmod will need a battery to function. You will only need a single battery type, the 18650.
This 18650 battery is inserted into the podmod through its battery compartment, which is accessed by unscrewing the stainless steel cap beneath the device. To do so, use the retractable lever, then slide the battery in, positive pole first.
The 18650 battery compartment of Geek Vape’s Aegis Eteno E100 podmod
A USB-C port for charging on the go!
Even if the Aegis Eteno E100 podmod works with a single 18650 battery, it can still be charged via USB!
Of course, we recommend you use a dedicated external charger (sold separately) when possible, which is better suited to charging this type of battery.
But if you’re stuck somewhere without your charger, simply plug the USB-C cable that’s in the kit into the podmod’s USB-C port, located on the bottom of its front panel.
The USB-C port of Geek Vape’s Aegis Eteno E100 podmod
The 4.5ml Eteno cartridge
One thing’s for sure, the Aegis Eteno E100 podmod goes beautifully well with the 4.5ml Eteno cartridge!
In addition to its generous capacity, this PETG tank has a removable top cap for a clean and fast top fill, an 810 drip tip built for cloud-chasing and a slot for the beafy P Series sub-ohm coils!
As you’d expect from a Geek Vape device, there’s aslo a top airflow ring.
The 4.5ml Eteno cartridge of Geek Vape’s Aegis Eteno E100 podmod
Which coils should you use?
The Aegis Eteno E100 cartridges work with all the P Series coils. The kit includes 2 coils so you can get started right away!
- One 0.2 ohm P Series coil (pre-installed in the cartridge), to be used from 60 to 70 watts
- One 0.4 ohm P Series coil (included in the kit), to be used from 50 to 60 watts
To set up and replace your P Series coil, proceed as follows:
- Unclip the cartridge from the pod
- Turn it over
- Soak the new coil with a bit of e-liquid
- Insert it in the middle of the tank, in the dedicated slot
- Wait 5 to 10 minutes before vaping
Change your coil every 2 to 3 weeks. If you struggle to remove the coil from the cartridge, use the coil spanner included in the Aegis kit.
Adjusting the draw of the Aegis Eteno E100 podmod
The Aegis Eteno E100 cartridges are designed to produce an airy vape with a direct inhale (DTL) or a restrictive direct inhale (RDL). You can adjust the airflow to get the mouthfeel you’re looking for.
To do so, use the airflow ring located beneath the cartridge’s Pyrex tank. Turn this ring until you get the draw you want.
The top-airflow system of Geek Vape’s Aegis Eteno E100 cartridge
How to fill your podmod
The Aegis Eteno E100 cartridges are all the same. They have a PETG tank of 4.5ml that’s easily filled through the top cap. To do so:
- Unscrew the whole upper part of the cartridge (the part above the airflow ring)
- Insert the tip of your bottle of eliquid into one of the side holes (never in the middle hole)
- Fill up
- Screw the top cap back on
- Wait 5 to 10 minutes for the coil to prime itself
The top-fill system of Geek Vape’s Aegis Eteno E100 podmod
Contents
- The Aegis Eteno E100 podmod of 100W
- One 4.5ml Eteno cartridge
- One 0.2Ω P Series coil (pre-installed)
- One 0.4Ω P Series coil
- A set of spare parts
- A USB-C cable
- A user guide
The Aegis Eteno E100 podmod is manufactured by Geek Vape.
Contents of the box of Geek Vape’s Aegis Eteno E100 podmod
Volume | 4.5ml |
---|---|
Battery type | 18650 x1 |
Height | 134.5mm |
Width | 33mm |
Depth | 39.6mm |
Mod type | Podmod |
Batteries included | No |
Weight | 148g |
Mod type | Electronic |
USB charging | Yes |
Chipset | AS Chipset |
Chipset version | Geek Vape |
Compatible coils | P Series Geek Vape |
Temperature control | Yes |
Tank | PETG |
Fill type | From above |
Drip-tip | 810 |
Connector pin | Proprietary |