Steam Crave Titan Advanced Combo Kit
A 300W titan, 4-battery power supply, dual coil, 32mm!
-
Size187 X 42 X 42 mm
-
Diameter41mm
-
Volume20 or 32ml
-
Brand
Reigning supreme in the vape world, the Titan Advanced Combo kit from Steam Crave combines the power of the Titan PWM V1.5 mod with the wonderful Titan V2 RDTA aromamizer.
With its maximum power of 300 watts, this electronic mod in variable voltage has an incredibly long battery life thanks to its dual or quad-18650 battery power supply (batteries not included). Thanks to its comrade, a 41mm wide dual-coil aromamizer with a 20 or 32ml capacity, nothing can resist you in the vape world!
Reminder: as this kit operates in variable voltage and can supply up to 300W of power, it is exclusively meant for experienced vapers used to VV vaping and series/parallel battery circuits!
Handling Steam Crave's Titan Advanced Combo kit
The union of two titans
The Titan PWM V1.5 mod and the Titan V2 RDTA aromamizer are two titans that were meant to meet! The result is a massive kit with a size of 187mm long and 41mm wide.
But this kit is more than just impressive as it is also extremely sturdy thanks to its composition of aluminium and stainless steel. However, Steam Crave also made it very ergonomic and compact, without skimping on wave-shaped details that allow you to easily handle it!
Steam Crave's Titan Advanced Combo kit
Up to 300W of power in a variable-voltage mod
This titan holds such an immense power that it's almost surreal! With this kit, you'll reach new heights in terms of variable-voltage vaping; up to 300 watts or 8.4 volts!
Use the rudder-shaped potentiometer on the main side of the mod to adjust this powerful kit (from 0.1 to 8.4V). Note that this clever gear also acts as a switch.
This colossal electronic mod is fitted with a small, yet clear and legible interface displaying the remaining battery level, the power, the tension, and the value of the coil installed.
The screen of Steam Crave's Titan Advanced Combo kit
Two or four 18650 batteries in parallel or series circuit
As for the battery life, you have two possibilities: two or four 18650 batteries! Thanks to a clever parallel-series system, simply slide your batteries into the battery slots and start vaping at full power!
Regardless of your choice, you'll enjoy gigantic power without sacrificing battery life!
The dual/quad-battery slot of Steam Crave's Titan Advanced Combo kit
The king of aromamizers
As for the atomizer, Steam Crave opted for the Titan V2 RDTA aromamizer, an enormous 41mm wide device fitted with an 810 drip tip and a dual-coil deck. In other words, this bottom-coil is the master of flavors and the king of vapor clouds!
Compatible with parallel or series dual-coil builds, this aromamizer offers various types of draw, is fitted with an e-liquid control ring, and comes with 4 Pyrex tanks with a capacity of 20 or 32ml!
The Titan V2 RDTA aromamizer from Steam Crave's Titan Advanced Combo kit
Dual-coil and Mesh strips for infinite build possibilities!
Your massive RDTA atomizer contains a large postless deck. However, and contrary to its dual-coil peers, it has not just 4, but 6 face-to-face coil slots! This specificity allows you to make both parallel and series builds.
This way, if you opt for a parallel dual-coil build with two 0.4ohm coils, the final value of the build will be 0.2ohm, while if you go for a series dual-coil build with two 0.4ohm, the final value of the build will be 0.8ohm!
The dual-coil deck of Steam Crave's Titan Advanced Combo kit
Your brand new Titan Advanced Combo kit includes all the components necessary to build a Mesh designed for flavorful builds with Mesh strips!
A versatile airflow
You'll find a clever airflow ring, riddled with different air intakes, right below your generous Pyrex.
This large choice of air intakes enables you to precisely adjust the vaping sensations from extremely airy to very tight! Simply twist the ring to adjust the airflow and vape!
The various air intakes of Steam Crave's Titan Advanced Combo kit
Four giant from 20 to 32ml to vape without interruption
On top of the 20ml Pyrex pre-fitted on the Titan V2 RDTA, your massive kit includes a spare 20ml Pyrex and two 32ml Pyrex! You can also use the vape bands included to protect your tank in case of unfortunate drops.
Even though you won't need to refill your tank often thanks to its very large capacity, it is fitted with a clever top-fill system, both clean and safe. Remove the top cap from the aromamizer to access 4 large filling holes!
Right above the airflow ring, an e-liquid control ring allows you to lock and unlock your aromamizer, allowing you to safely refill your tank.
The top-fill system of Steam Crave's Titan Advanced Combo kit
Contents of the box of the Titan Advanced Combo kit
- One 300W Titan PWM V1.5 mod
- One Titan V2 RDTA aromamizer
- One spare 20ml straight Pyrex
- Two spare 32ml straight Pyrex
- One chimney extender for the 32ml straight Pyrex
- Two Steam Crave vape bands
- One Mesh deck in kit form
- One coil jig
- Two ready-made coils
- Four ready-made Mesh strips
- Organic cotton laces
- One set of joints, screws, and tools
- Two user guides
The Titan Advanced Combo 300W is manufactured by Steam Crave.
Contents of the box of Steam Crave's Titan Advanced Combo kit
Size | 187 X 42 X 42 mm |
---|---|
Diameter | 41mm |
Volume | 20 or 32ml |
Maximum power | 300w |
Coil build | Dual-coil |
Battery type | 18650 x2 (or x4) |
Atomizer type | Bottom-coil |
Material | Stainless steel and Aluminium |
Mod type | Box |
Batteries included | No |
Mod type | Electronic |
USB charging | No |
Chipset | Other |
Chipset version | Steam Crave |
Temperature control | No |
Tank | Pyrex |
Fill type | From above |
Drip-tip | 810 |
Connector pin | 510 |
Configuration | Variable Voltage |