Lost Vape Centaurus B80 AIO Boro Kit
An all-in-one kit: an RBA boro and a cartridge with coil
-
Volume5ml
-
Maximum power80w
-
Coil buildSingle-coil
-
Brand
Lost Vape rolls out the red carpet for all beginners of the Boro AIO format, by giving you everything you need to start! Are you a vape expert and you wish to start in the Billet Box adventure? Here is the Centaurus B80 AIO Boro kit, a complete pack with an electronic mod, an RBA boro (rebuildable), and a UB AIO cartridge to hold the UB Ultra coils.
Be charmed by an All-In-One rectangular design, and enjoy an easy and intuitive use thanks to the famous QUEST 2.0 chipset by Lost Vape. Supplied by a single 18650 battery (not included), the Centaurus B80 AIO Boro kit delivers a maximum power of 80W.
Lost Vape's Centaurus B80 AIO Boro kit
An all-in-one format with a chic look
In zinc alloy and stainless steel, the Centaurus B80 AIO Boro will charm the enthusiasts of the Billet Box format, here in rectangular dimensions of 80.8x50x24.4mm. The two sides of the kit have a magnetic panel, hiding the tank on one side and the battery, the 0.42" screen, the settings button, and the USB-C port on the other.
For the mouthpiece, a 510 drip-tip is already installed on the kit. You have the possibility to change the mouthpiece for a more original design. Don't forget to put the small washers around the drip-tip, to correctly fix it.
Compact and designed, this electronic cigarette only weighs 150g (without batteries), which gives it a perfect ergonomy and an agreeable ease of transport.
Handling of Lost Vape's Centaurus B80 AIO Boro kit
A simple and intuitive functioning
For a beginning in the AIO universe, Lost Vape sees things in big for vape beginners and experts. According to the tank, the RBA boro, or the UB AIO cartridge, select the corresponding functioning mode. The manufacturer only offers two settings, which maximizes the capacities of this AIO e-cigarette. Start by turning your kit on by pushing 5 times on the Fire button.
Push the Fire button 3 times to access the menu, and opt for the appropriate setting:
- Normal mode: the QUEST chipset automatically defines the power delivered, according to the value of the coil installed in the UB AIO cartridge, note that you can increase or lower the watts, in the limit of the maximum power for your coil
- RBA mode: select this mode only if you choose the Boro RBA tank (rebuildable). Warning, this setting won't automatically adapt the power, you have to define it (from 5 to 80W), according to the coil wire used in your build.
All this information is accessible on the 0.42" screen of the Centaurus B80 AIO, located on top of the settings button. Simply lift the magnetic panel, on the Fire button side, to free the access.
The 0.42" screen of Lost Vape's Centaurus B80 AIO Boro kit
An 1850 battery for a power of 80W
Enjoy a nice vape autonomy thanks to the power system by a single 18650 battery (not included) of the Centaurus AIO Boro kit, delivering to the QUEST 2.0 chipset for a maximum energy of 80 watts.
Slide the 18650 battery into the dedicated space, located under the magnetic panel, on the side of the Fire button. Make sure you respect the polarity side, indicated by the '+' and '-' signs on the back of the trapdoor.
The single 18650 battery trap door of Lost Vape's Centaurus B80 AIO Boro kit
A USB-C recharging port
Are you out of battery and you don't have any spare batteries? Lost Vape has thought of everything! The kit has a USB-C port so you can fill your electronic cigarette with energy.
For this, connect the USB-C cable included in the port, located under the settings button of the Centaurus AIO Boro.
We recommend using the external charger (not included) as much as possible for your battery; so you can extend your life duration and ensure better safety during the recharging.
The recharging USB-C port of Lost Vape's Centaurus B80 AIO Boro kit
A hybrid kit: RBA Boro tank and UB AIO cartridge
Lost Vape's conception smartness of the Centaurus AIO Boro is in its compatibility with two types of tanks, each one with a capacity of 5ml.
At the reception of your kit, you'll find:
- 1 RBA Boro tank: with single coil deck for fans of rebuildable
- 1 UB AIO cartridge (pre-installed): meant to have UB Ultra coils. Note that your kit is delivered with two coils (0.2ohm and 0.15ohm)
It's up to you to choose the tank that suits you best, or to alternate between the two during the day! Whether you use one or the other, you'll enjoy a draw going from tight with indirect inhalation (MTL) to semi-airy with restrictive direct inhalation (RDL).
Tip: use the wrench included to release the tank to be replaced; to do this, remove the 510 drip tip to access the unlocking nut.
Boro RBA tank
This atomizer, included in your kit box, is aimed at rebuildable enthusiasts. Featuring a bottom coil deck, you'll be able to make your own single-coil build. Simply screw the coil tabs into the two flat screw posts.
Remember to purchase the necessary consumables (coils, cotton), as these are not supplied in the kit.
Then select the RBA mode, to take advantage of the kit's optimum performance during your vaping sessions.
RBA Boro tank's deck of Lost Vape's Centaurus B80 AIO kit
The UB AIO cartridge
Are you a rebuildable beginner or do you just want to enjoy your AIO kit without having to build it? Lost Vape goes beyond in its AIO conquest, by giving a UB AIO cartridge, made to host pre-made coils!
Compatible with all the UB Ultra coil collection, adapt the value of the coil according to the vape type wished, going from a tight draw in indirect inhaling (MTL) to a more airy draw in restrictive direct inhaling (RDL).
Two coils are delivered in the kit's box, allowing you to use the UB AIO cartridge as soon as you receive the Centaurus AIO Boro:
- 1 UB Ultra coil 0.15ohm: to use between 60 and 80 watts, for an airy draw
- 1 UB Ultra coil 0.2ohm: to use between 40 and 60 watts, for a restrictive draw
Don't hesitate to get a box of UB Ultra coils during your order (Value: 0.15ohm, 0.2ohm, 0.3ohm).
UB AIO cartridge of Lost Vape's Centaurus B80 AIO Boro kit
To easily put the coil in the UB AIO cartridge, follow the steps below:
- Take the magnetic panel off the Centaurus AIO Boro
- Remove the drip-tip and slightly unscrew the nut thanks to the equipment provided
- Take the cartridge off
- Pull the airflow wheel to remove it
- Soak a new coil of some drops of e-liquid and insert it
- Replace the airflow wheel
- Fill the e-liquid tank
- Put the cartridge back
N.B: wait for 5 to 10 minutes before vaping it so that the new coil is correctly primed.
An adjustable airflow for the two tanks!
No matter the tank chosen, you'll benefit in both cases of a system of airflow settings.
For the UB AIO cartridge: make the wheel spin under the tank to set the airflow according to the type of draw you wish to have (less or more airy).
Airflow wheel of Lost Vape's UB AIO cartridge
For the RBA Boro tank, use one of the three pins included (1mm, 2mm, or 3mm of opening) to adjust the airflow. Screw the pin under the tank, to insert the latter in the kit.
The 3 airflow pins of Lost Vape's RBA Boro tank
Filling of these tanks
Whether you chose the RBA Boro tank or the UB AIO cartridge, you'll benefit in both cases of a 5ml tank and a filling system.
When you need to recharge your cartridge or your tank in e-liquid, you have to:
- Take the magnetic panel off, hiding the tank
- Lift the silicon strip located in the tank
- Insert the tip of your bottle inside the hole
- Pour the e-liquid
- Carefully close the strip
- Replace the magnetic panel
Filling of the Boro RBA tank of Lost Vape's Centaurus B80 AIO Boro kit
Contents of the box
- 1 Centaurus B80 AIO Boro
- 1 5ml UB AIO cartridge (pre-installed)
- 1 0.15ohm UB Ultra coil
- 1 0.2ohm UB Ultra coil
- 1 RBA Boro tank
- 1 510 drip-tip
- 1 spare drip tip with a cap
- 1 metal key
- 1 USB-C recharging cable
- 3 airflow pins for the RBA Boro tank
- 1 pack of washers
- 1 bag of spare parts
- 2 user guides
The Centaurus B80 AIO Boro kit is made by Lost Vape. Warning, it is sold without batteries and without consumables for the RBA.
Contents of the box of Lost Vape's Centaurus B80 AIO Boro kit
Volume | 5ml |
---|---|
Maximum power | 80w |
Coil build | Single-coil |
Battery type | 18650 x1 |
Atomizer type | Bottom-coil |
Height | 80.8mm |
Material | Stainless steel and zinc alloy |
Width | 50mm |
Depth | 24.4mm |
Batteries included | No |
Weight | 150g |
Mod type | Electronic |
USB charging | Yes |
Chipset | Quest 2.0 |
Chipset version | Lost Vape |
Compatible coils | 0.15 to 2.0 Ohms |
Compatible coils | UB Ultra Coils |
Temperature control | No |
Tank | PCTG |
Fill type | From the side |
Drip-tip | 510 |
Connector pin | Boro |
Connector pin | Proprietary |
Configuration | Variable Wattage |
Your comment cannot be sent
feedback Report a comment
Abuse report sent
Your report cannot be sent