Lost Vape Thelema Q200 Pro Kit

Lost Vape completes its Thelema series with the Q200 Pro, a kit made for your airy draw in direct inhaling (DL).

Composed of the Thelema Q200 Pro mod and the performing Centaurus Sub Ohm V2 clearomizer, this electronic cigarette is supplied with two 18650 batteries (not included).

The mod is equipped with the Quest X3.0 chipset, giving you access to several functioning modes, including a power setting of up to 200W.

Also, find a 1.47" TFT screen with a customization of the graphical user interface and an ON/OFF switch.

The clearomizer is specially made to hold the UB Max coils by Lost Vape.

Lost Vape's Thelema Q200 Pro kit

A standard design for a performing kit

The Thelema Q200 Pro kit has ergonomic dimensions of 150.5x57x28mm for a battery-less weight of 230g.

Its mod offers:

• 1 1.47" TFT screen
• 2 setting buttons
• 1 locking switch
• 1 18650 dual battery compartment
• 1 USB-C port

Handling of Lost Vape's Thelema Q200 Pro kit

An intuitive and practical kit

With the Thelema Q200 Pro kit, Lost Vape lets you control the functioning of your electronic cigarette.

Its mod offers several setting modes to select via the screen and the setting buttons:

• WATT mode: power manual setting, from 5W to 200W
• BOOST mode: the Quest X3.0 chipset delivers more power at the start of a puff
• VOLTAGE mode: set the voltage from 0.7V to 8.0V
• Temperature mode (Ni, Ti, SS): adjust the temperature from 100°C to 315°C

The screen of Lost Vape's Thelema Q200 Pro kit

The Thelema Q200 kit also has a handy button enabling you to quickly turn on or off the mod.

This switch is located on the kit's main side, just below the setting buttons.

The ON/OFF button of Lost Vape's Thelema Q200 Pro kit

A 18650 dual battery compartment

The Thelema Q200 Pro kit is specially made to hold two batteries (not included) with a 18650 format.

To insert them, you only need to pull on the magnetic panel.

Remember to respect the polarity directions indicated while inserting the batteries.

The 18650 dual battery compartment of Lost Vape's Thelema Q200 Pro kit

Are you out of charged batteries? Use the USB-C cable included and connect it to the mod's port located below the locking switch.

We recommend using an external charger as much as possible for your batteries, in order to preserve their lifespan.

The USB-C port of Lost Vape's Thelema Q200 Pro kit

The Centaurus Sub Ohm V2 clearomizer

Screwed onto the Thelema Q200 Pro mod via its standard 510 pin, the Centaurus Sub Ohm V2 is a clearomizer designed for direct inhaling (DL).

Also, paired with an 810 drip tip and UB Max coils, it is specially designed to deliver a smooth, airy vape.

It features a bulb Pyrex tank with a 5ml e-liquid capacity.

The Centaurus Sub Ohm V2 clearomizer of Lost Vape's Thelema Q200 Pro kit

The UB Max coils

The Thelema Q200 Pro kit is delivered with two UB Max coils:

• 1 0.15ohm UB Max V2 coil: to use between 80 and 100W, for a very airy vape
• 1 0.3ohm UB Max V2 coil: to use between 40 and 60W, for a bit more restrictive draw

To install the coil in the clearomizer, follow the steps below:

1. Unscrew the bottom part of the Centaurus Sub Ohm V2
2. Soak a new coil with some e-liquid drops
3. Insert the coil into its compartment
4. Screw the bottom part back
5. Fill the tank with e-liquid
6. Connect the Centaurus Sub Ohm V2 to the mod
7. Wait for some minutes so the coil is correctly primed with e-liquid

An efficient top airflow

The airflow of the Centaurus Sub Ohm V2 is composed of two large air intake holes, located on the clearomizer's top part.

Easily and quickly customize the airflow by simply pivoting the airflow ring.

The more you free the holes, the airier the draw.

The airflow of the Centaurus Sub Ohm V2 clearomizer of Lost Vape's Thelema Q200 Pro kit

A top-filling tank

With a sliding top cap, the Centaurus Sub Ohm benefits from a filling system as clean as it is handy.

When you need to recharge the 5ml of the tank, you'll need to:

1. Pivot the top cap of a quarter turn, then slightly push it toward the back
2. Insert the thin tip of your bottle into the filling hole
3. Pour your e-liquid up to three-quarters
4. Push the top cap back, then turn it towards the "LOCK" mark

Filling of Lost Vape's Thelema Q200 Pro kit

Box contents

• 1 200W Thelema Q200 Pro mod
• 1 Centaurus Sub Ohm V2 5ml clearomizer
• 1 0.15ohm UB Max coil
• 1 0.3ohm UB Max coil
• 1 3ml straight Pyrex
• 1 set of spare pieces
• 1 USB-C cable
• 1 user guide

The Thelema Q200 Pro kit is made by Lost Vape. It is sold without batteries.

Box contents of Lost Vape's Thelema Q200 Pro kit