Eleaf GTL Tank 4.5ml Clearomizer
A hybrid clearomizer similar to a cartridge
-
Diameter26mm
-
Volume4.5ml
-
Height51mm
-
Brand
Eleaf offers you a great clearomizer with a nice 4.5ml capacity! Yet, it's not its only asset; indeed, this clearomizer-cartridge hybrid is made up of two parts, namely a 510 base, and a magnetic cartridge with a non-replaceable drip tip that is a fixed extension of the PCTG tank.
The GTL Tank 4.5ml is compatible with the whole GTL coil range from Eleaf, offering you a large array of draws from MTL (indirect inhaling) to DL (direct inhaling).
The GTL Tank clearomizer fitted on Eleaf's Ikuu i80 mod
A 2-in-1 clearomizer
Do not be fooled by the round shape and fixed PCTG drip tip of the GTL Tank 4.5ml! Even though it looks like a cartridge, it is actually a clearomizer that Eleaf offers you.
The magnetic tank of this clearomizer perfectly connects to the magnetic base fitted with a standard 510 connector. This way, you can use this great clearomizer with most mods on the market that can accommodate a piece of equipment with a maximum diameter of 26mm.
The GTL Tank 4.5ml Clearomizer by Eleaf
This hybrid device can be refilled with ease by simply unclipping it from the magnetic base; no need to unscrew it, you can simply fill your tank through the bottom of the cartridge!
The magnetic connector of Clearomizer GTL Tank 4.5ml by Eleaf
Compatibility with the GTL coils
The GTL Tank 4.5ml is designed to operate with all the coils from Eleaf's GTL coils. Your clearomizer is delivered with two coils:
- One 0.8ohm GTL coil: to be used between 12 and 18W for a tight draw with an indirect inhale (MTL) or even a restricted direct inhale (RDL)
- One 0.4ohm GTL coil: to be used between 20 and 30W for an airy draw with a direct inhale (DL)
Regardless of the value of your coil, you can still adjust the vaping sensations by using the clever airflow system of the GTL Tank 4.5ml!
You will notice signs of wear (flavor loss, burnt taste) after two or three weeks of use. It is time to replace your coil!
Proceed as follows:
- Remove the tank from the magnetic base
- Pull the worn-out coil to remove it
- Take a new coil and soak it with a few drops of e-liquid
- Insert it into the dedicated slot
- Fill up your tank with e-liquid
- Clip the tank back onto the magnetic base
- Wait for 5-10 minutes before vaping to make sure the new coil is primed
Adjustable airflow
The base of your clearomizer is adorned with a clever airflow ring that allows you to adjust the airflow.
Twist the airflow ring and enjoy the exact type of draw you want!
The airflow ring of Eleaf's GTL Tank 4.5ml Clearomizer
A magnetic connector for an easy refill
As stated above, the GTL Tank 4.5ml has two connectors:
- a base with a standard 510 pin that allows you to use it with most mods on the market (maximum diameter: 26mm)
- a magnetic base designed to accommodate the tank, similar to a cartridge
This specificity allows you to fill up your tank without needing to unscrew the clearomizer from the mod! Simply unclip it and proceed as follows:
- Lift the silicone tab under the tank
- Insert the tip of your e-liquid bottle into the dedicated hole
- Pour e-liquid into the tank, up to three quarters
- Close the silicone tab
- Clip the tank back onto the magnetic base
- If you use a new coil, wait for 5-10 minutes before vaping to make sure it is primed
The bottom-fill system of Eleaf's GTL Tank 4.5ml Clearomizer
Contents of the box
- One GTL Tank 4.5ml clearomizer
- One 0.8ohm GTL coil
- One 0.4ohm GTL coil
- One user guide
The GTL Tank 4.5ml clearomizer is manufactured by Eleaf.
Contents of the box of Eleaf's GTL Tank 4.5ml clearomizer
Diameter | 26mm |
---|---|
Volume | 4.5ml |
Height | 51mm |
Material | Stainless steel |
Width | 26.1mm |
Compatible coils | GTL |
Tank | PCTG |
Fill type | From below |
Drip-tip | Proprietary |
Connector pin | 510 |
Your comment cannot be sent
feedback Report a comment
Abuse report sent
Your report cannot be sent