Fumytech Dragon Ball Sub-Ohm Clearomizer

Looking for a DL clearomizer? The Dragon Ball matches design, power, and explosion of flavors.

Fumytech stands out once more by offering the Dragon Ball Sub-Ohm, a device as well-designed as it is performing.

Compatible with the FTC coils, this clearomizer is meant for an airy draw in direct inhaling (DL).

It embarks a bulb tank in Ultem of 5.5ml, easily fillable from the top.

With a 25mm diameter for a 35mm width with the Pyrex, the Dragon Ball Sub-Ohm clearomizer can be associated with all mods with a standard 510 connection.

The Dragon Ball Sub-Ohm clearomizer with Vaperz Cloud's Ascent Lite mod

A Dragon Ball design

As its name suggests, the Dragon Ball Sub-Ohm gets its spherical design from the crystal balls in the famous anime series.

With flawless manufacturing quality from Fumytech, this clearomizer combines stainless steel with Ultem for a design that is as attractive as it is effective.

With a diameter of 25mm, a height of 55mm, and a width of 35mm, weighing in at 97g, this is a device with a truly impressive look!

Its original 810 drip tip in Ultem can be changed for the black one included in the box.

Note the details that reference Dragon Ball: the stars on the round Ultem tank and airflow holes, and an engraving above the tank featuring the sacred dragon 'Shenron'.

Fumytech's Dragon Ball Sub-Ohm clearomizer

The FTC coils

Specially made by Fumytech for your airy vape in direct inhaling (DL), the FTC coils match the Dragon Ball Sub-Ohm.

Successfully combining clouds and flavors, they are available and included in 4 different varieties!

You will find a copy of each in the clearomizer box:

• 1 0.4ohm FTC Mesh coil: to use between 40 and 50W
• 1 0.3ohm FTC Mesh coil (pre-installed): to use between 45 and 60W
• 1 0.2ohm FTC Mesh coil: to use between 60 and 70W
• 1 0.15ohm FTC Mesh coil: to use between 60 and 75W

When the time comes to replace your used coil, follow the steps below:

1. Unscrew the bottom part of the Dragon Ball Sub-Ohm clearomizer
2. Pull on the used coil to take it off
3. Soak a new coil with some e-liquid drops
4. Insert it in place of the old one
5. Fill your tank with e-liquid
6. Reconnect the Dragon Ball Sub-Ohm to your mod
7. Wait for some minutes before vaping so the new coil is correctly primed with e-liquid

The top airflow of Dragon Ball Sub-Ohm

What could be better than a handy and effective top airflow to accompany your powerful and cloudy vape!

Always with attention to detail, Fumytech stands out by piercing the top of the clearomizer with 8 star-shaped airflow holes.

Spread across two opposite rows, these air intakes can be partially or fully blocked by turning the airflow ring.

Simple, quick, and effective, this top airflow system gives you complete control over the type of draw you want, whether it's airier or less airy.

The airflow of Fumytech's Dragon Ball Sub-Ohm clearomizer

A top-filling 5.5ml tank

We told you that Fumytech knew how to combine performance and design.

In terms of design, the Dragon Ball Sub-Ohm features an Ultem tank with a round shape and decorated with four red stars.

In terms of performance, the clearomizer has a filling system that is as handy as it is quick, via the top of the tank (top-fill).

When you need to fill it with e-liquid:

1. Unscrew the top cap of a quarter turn
2. Insert the thin tip of your bottle into the protected hole by a silicon strip
3. Pour your e-liquid up to three-quarters
4. Close the top cap

Wait for a few minutes before vaping if you use a new coil.

The filling of Fumytech's Dragon Ball Sub-Ohm clearomizer

Box contents

• 1 Dragon Ball Sub-Ohm clearomizer
• 1 spare black 810 drip tip
• 1 0.15ohm FTC Mesh coil
• 1 0.2ohm FTC Mesh coil
• 1 0.3ohm FTC Mesh coil (pre-installed)
• 1 0.4ohm FTC Mesh coil
• 1 bag of spare washers
• 1 user guide

The Dragon Ball Sub-Ohm clearomizer is made by Fumytech.

Box contents of Fumytech's Dragon Ball Sub-Ohm clearomizer