Voopoo Uforce-X Clearomizer

A 5ml bulb tank, an 810 drip-tip, and compatibility with the PnP X coils, here is all you need for vape sessions in direct inhaling!

Handy, the Uforce-X has a 5.5ml bulb tank with a top filling system.

With its standard 510 connector, this clearomizer will screw on all your mods with a maximum diameter of 25.5mm.

Voopoo's Uforce-X clearomizer on Lost Vape's Centaurus M200 mod

The design of Uforce-X

Made for an airy draw, the Uforce-X has dimensions of 52.95mm x 29mm for a base diameter of 25.5mm.

Its top part has an 810 drip-tip and a ring meant for the settings of air intakes.

Its bulb pyrex offers a capacity of 5.5ml e-liquid, top filling by pulling the top cap.

Voopoo's Uforce-X clearomizer

The PnP X coils for your sub-ohm clearomizer

Made to receive the PnP X coils of Voopoo (from 0.15 to 0.3ohm), your Uforce-X is delivered with two models with distinct values:

• 1 0.2ohm PnP X coil: to use between 40 and 60W
• 1 0.15ohm PnP X coil: to use between 60 and 80W

Even if these two coils are meant for a cloudy vape in direct inhaling (DL), the lowest value will give you a more airy draw!

How to change the coil of Uforce-X?

After selecting the value that suits you, follow the steps below to set your coil:

1. Start by soaking the latter with some drops of e-liquid
2. Unscrew the bottom part of the clearomizer
3. Insert the coil into its compartment
4. Screw the bottom part of your Uforce-X
5. Fill the tank with e-liquid
6. Connect the clearomizer to your mod
7. Wait for some minutes before vaping to let the new coil be primed

The top airflow of Uforce-X

Simply and quickly adjust the airflow by pivoting its airflow ring located on the top part of your UForce-X.

This top airflow system not only performs but it allows reduces any risk of e-liquid leaks!

The airflow ring of Voopoo's Uforce-X clearomizer

How to fill the 5.5ml Uforce-X?

To refill the 5.5ml tank, it's very easy! Indeed, the Uforce-X has a top filling system.

Take your e-liquid bottle, then:

1. Push the top cap of the clearomizer to free the filling hole, see the 'PUSH' indication
2. Insert the thin tip of your bottle in the hole of the silicon strip
3. Pour your e-liquid up to three-quarters
4. Put the top cap back on
5. Wait for some minutes before vaping if you use a new coil

Voopoo includes in the Uforce-X box, a spare bulb Pyrex, and a 5.5ml identical capacity.

Top filling of Voopoo's Uforce-X clearomizer

Box contents

• 1 5.5ml Uforce-X clearomizer
• 1 0.2ohm PnP X coil
• 1 0.15ohm PnP X coil
• 1 spare 5.5ml bulb pyrex
• 1 bag of spare washers
• 1 user guide

The Uforce-X clearomizer is made by Voopoo.

Box contents of Voopoo's Uforce-X clearomizer